Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - msr

Pages: 1 2 [3] 4 5 6
51
Projects / Re: wilder craft tunnel
« on: October 14, 2016, 09:15:14 PM »
What intake and pump does it have?
it will have a berk pump built by us the most intake is one that wilder and Papp made for four the wilder hulls

52
Projects / Re: wilder craft tunnel
« on: October 09, 2016, 04:20:40 PM »
We got a little more progress on the project. Got the rails made and installed
I'm happy with the way they came out

53
Projects / Re: wilder craft tunnel
« on: September 30, 2016, 02:08:35 PM »
Are you staying with a center steering?
no we're moving it to the left it's going to be more of a river boat

54
Projects / Re: wilder craft tunnel
« on: September 29, 2016, 05:56:54 PM »
We got the stringers glassed in what a pain so far under the deck

55
Projects / Re: wilder craft tunnel
« on: September 29, 2016, 05:51:37 PM »
What kind of wood did you use for your stringer's?
Clear doug fur

56
Projects / Re: wilder craft tunnel
« on: September 28, 2016, 06:47:18 PM »
Here's a few more build pictures got the new wood for the stringers sanded and set in place

57
Projects / Re: wilder craft tunnel
« on: September 28, 2016, 06:42:31 PM »
Nice hull I'd like to have this one . Gonna be a fun build 👌🏻


Sent from my iPhone using SoCal Jet Boats
same thing I was thinking when we picked it up

58
Projects / Re: wilder craft tunnel
« on: September 27, 2016, 04:23:15 PM »
Stringers stripped out these things are 15 feet long a true full stringer hull

59
Projects / wilder craft tunnel
« on: September 27, 2016, 04:08:55 PM »
We picked up a wilder craft tunnel was hoping to do a quick re rigg but after we stripped her down we found some delamination on the  stringers once we really dug in the stringers we junk

60
Engines / Engine Parts For Sale / Re: WTB polished bbc tunnel ram
« on: September 27, 2016, 03:54:29 PM »
Here is a BBC rec port Edelbrock set up for dual 4150 carbs

Just back from polishing...
Hey Jayson past this on to my customer with your # thanks

61
Random Boat Parts For Sale / Re: free
« on: September 27, 2016, 03:49:19 PM »
Replied to tex and yes I still have them just call and come get them
I would like to see them go to someone who needs and will use them

62
Projects / Re: 1974 Rogers build
« on: September 26, 2016, 09:09:41 PM »
Msr not trying to thread jack but pm me if you could? I sure would like to have one of those pump braces...

Thanks
Jason

Btw gonna be a sweet float! What colors?


Sent from my shop setting in my boat making motor noises
give me a call 805 304-7261 chuck

63
Projects / Re: 1974 Rogers build
« on: September 26, 2016, 02:28:54 PM »
Let's put calgo steering in it

64
Random Boat Parts For Sale / free
« on: September 25, 2016, 12:06:13 PM »
I have for free two sets of used motor rails for someone who needs them and can pick them up in moorpark

Call chuck at 805 304-7261

65
Engines / Engine Parts For Sale / Re: Holley 750 carb
« on: September 23, 2016, 02:55:29 PM »
Pm sent
Sale pending thanks let's dance

Sent from my iPad using SoCal Jet Boats

66
Cars / Automobiles For Sale / fiberglass buggy body
« on: September 16, 2016, 04:35:51 PM »
I have a fiberglass buggy body and hood comes with a stock pan and a trany bill of sale only
$500 call chuck at 805 304-7261

SOLD

67
Hulls / Re: Getting precise stringer match curve without old stringer?
« on: September 16, 2016, 04:02:59 PM »
This are the tools we use to fit new stringers
Angel finder, scribe, a good table saw , band saw and a good belt sander
And if I'm replacing 2×6 I get 2×8 so once I fit them I have room to rip them down so that their are the  same size

68
Engines / Engine Parts For Sale / Re: Holley 750 carb
« on: September 15, 2016, 09:38:22 AM »
Bump

69
Engines / Engine Parts For Sale / Re: Holley 750 carb
« on: August 26, 2016, 11:25:27 AM »
On the throttle linkage side there's a letter and 2 numbers either p-32 or p-46 can u tell me what one you have? Thanks Steve
p-46

70
Hulls / Re: Lite lay up?
« on: August 21, 2016, 09:16:09 PM »
you think it's more of an medium lay up on the wilder or on the heavy side of a lite lay up. I wish I woukd of weighted mine before I did all the work to know for sure.
I have been told that most of them are in the low 300 s lb from what I've seen they thought about what they were doing when they built them

71
Hulls / Re: Lite lay up?
« on: August 21, 2016, 08:25:05 PM »
my deck flexes  with a slight touch of the finger the sides flex with a touch of the palm.  And the bracing  under my deck is machined aluminum  that goes from the bottom stringers to a top set of "stringers" (that what they look like to me) glassed in under the deck. There is three sets of these aluminum brace rods there is also one set that goes diagonal to form an X shape. ) that what I meant , for my bracing which is a lot to me considering the room I have underneath the deck. I know its lite enough my 7 year old son can pick up the tounge and hitch it to truck
the wilder in our shop has the same aluminum bracing as yours the deck is  lite but no where as lite as the cp tunnel  we have that thing is supposed to be in under 300 LB

72
Engines / Engine Parts For Sale / Re: Edlebrock Victor jr 454r
« on: July 26, 2016, 08:25:34 PM »
Bump

73
Bump

74
Engines / Engine Parts For Sale / Re: Holley 750 carb
« on: July 26, 2016, 08:23:22 PM »
Bump

75
Engines / Engine Parts For Sale / Re: WTB polished bbc tunnel ram
« on: July 26, 2016, 08:22:05 PM »
Bump

Pages: 1 2 [3] 4 5 6

Null

SMFPacks CMS 1.0.3 © 2026