51
Engines / Engine Parts For Sale / Re: BBF 460 Stuff Lower Prices
« on: April 23, 2010, 02:54:09 PM »
V.C.'s sold
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
52
Engines / Engine Parts For Sale / Re: BBF 460 Stuff Lower Prices
« on: April 16, 2010, 08:10:04 PM »
Yes I do still have them. They are cleaned and ready to go.
53
Engine Mechanical / Electrical / Re: Ford 460 D1ve
« on: April 15, 2010, 05:59:41 PM »
Got the donor motor last week finally and got her dropped in. Got everything bolted up and running...now just to tune the carb 
Here are a couple of pics of the motor dropped in. I think she looks pretty sexy. I just cant wait to be back out on the water 
. Oh and I had looked up all of my posts to find some of my really old posts and I just wanted to say sorry for some of the rude comments I had left. Honestly I must have been hammered when I posted them cause I didnt even know that I posted them till I saw it.
Here are a couple of pics of the motor dropped in. I think she looks pretty sexy. I just cant wait to be back out on the water . Oh and I had looked up all of my posts to find some of my really old posts and I just wanted to say sorry for some of the rude comments I had left. Honestly I must have been hammered when I posted them cause I didnt even know that I posted them till I saw it.
54
Topock / Laughlin / Re: Laughlin/Mojave for the 4th!
« on: April 15, 2010, 05:54:06 PM »
82 reads and no ones gonna be in laughlin for the 4th? Where is everyone going to be?
55
WTB / MSD ignition box
« on: April 02, 2010, 05:07:07 PM »
Anyone have a MSD ignition box. Preferably a 6a or 6m or better.
Thanks
Rob
Thanks
Rob
56
Engines / Engine Parts For Sale / HELP!
« on: April 02, 2010, 05:06:04 PM »
Hey guys,
So I got a donor motor for the boat so I can get on the water this weekend but my MSD box is shot apparently and the other one I had I sold. So I need another MSD box. Anyone have one I can buy from them? 
Thanks Guys
Rob
So I got a donor motor for the boat so I can get on the water this weekend but my MSD box is shot apparently and the other one I had I sold
. So I need another MSD box. Anyone have one I can buy from them? Thanks Guys
Rob
57
Engines / Engine Parts For Sale / Re: BBF 460 Stuff Lower Prices
« on: March 29, 2010, 07:44:14 PM »
valves are stock oem. non s.s. no roller rockers but the studs and guide plates are there and the rockers were 1.73's.
58
Engines / Engine Parts For Sale / Re: BBF 460 Stuff Lower Prices
« on: March 29, 2010, 06:50:34 PM »
Hopefully. I should have it by fri sat. Thank god for good friends (and thier dads). He's got money and is going to run a fully built and stroked 460 with blower. Hand me downs are awesome!
59
Topock / Laughlin / Laughlin/Mojave for the 4th!
« on: March 29, 2010, 07:55:38 AM »
Anyone gonna be out there for the 4th? We will be out there at gasoline alley for the majority of the weekend. Also if any of you guys know of any other spots to go out there please let me know. I am always up for an adventure. Just found out I'll have a donor motor next week so we will be out there in the candy corn lookin boat in my avatar.
Rob
Rob
60
Projects / Re: Rays officially lost his mind!
« on: March 27, 2010, 08:23:50 PM »
Hell yeah! That thing will be rad when its done! Twin 460's it should get up and go pretty well. Nice find! 
61
Engines / Engine Parts For Sale / Re: Weiand Tunnel Ram BBF Polished!
« on: March 27, 2010, 11:49:54 AM »
SOLD
62
Gelcoat / Paint / Fireberglass Repair / Re: Painting the
« on: March 22, 2010, 09:06:36 PM »
What kind of paint are you using? Where are you getting it from? I am looking to do the same thing pretty soon and am looking for some recommendations or ideas on what to use.
Thanks,
Bert
Thanks,
Bert
63
Engines / Engine Parts For Sale / Weiand Tunnel Ram BBF Polished!
« on: March 22, 2010, 04:41:07 PM »
This is a Weiand Tunnel ram for a bbf 460/429 long block. Set up for dual carb setup but has the interchangeable top. It was just polished and is in great shape. Looking for $275.
Thanks,
Rob
Thanks,
Rob
64
Engines / Engine Parts For Sale / Re: BBF 460 Stuff
« on: March 17, 2010, 08:40:10 PM »
more pics
65
Engines / Engine Parts For Sale / Re: BBF 460 Stuff
« on: March 17, 2010, 07:21:06 PM »
Oh yeah no lifters. I do have the pushrods however 3 of them will need to be replaced due to slight rusting. All prices are OBO and I can ship at your cost.
67
Engines / Engine Parts For Sale / BBF 460 Stuff Lower Prices
« on: March 17, 2010, 07:10:37 PM »
Here is a list of what I have that I need to sale. Dont wanna do it but I have to.
D0ve-c heads non ported in good shape w/comp cams springs - $200
Milodon Oil Pan (Gold) I believe its an 8 qt pan front sump. Dirty in pics but will be clean - SOLD
Moroso Aluminum Valve Covers (Gold) - $50
460 Block Casting D1ve bored .030 over (needs a honing, other than that in good shape) - $100
Weiand Tunnel ram w/interchangeable top polished(set up for two 4bbl now) - SOLD
Comp Cams Camshaft #34-331-4 Specs: http://www.compcams.com/Cam_Specs/CamDetails.aspx?csid=989&sb=2
Also have double chain timing set with harmonic balancer for it as well. - $100 for all
Ford crankshaft 2y (needs one of the rod journals polished) Internally balanced - $30
MSD Ignition Box MSD 6A - SOLD
MSD Coil Blaster 2 $30
Pm me on here or feel free to give me a call 760-576-7152 Robert
D0ve-c heads non ported in good shape w/comp cams springs - $200
Milodon Oil Pan (Gold) I believe its an 8 qt pan front sump. Dirty in pics but will be clean - SOLD
Moroso Aluminum Valve Covers (Gold) - $50
460 Block Casting D1ve bored .030 over (needs a honing, other than that in good shape) - $100
Weiand Tunnel ram w/interchangeable top polished(set up for two 4bbl now) - SOLD
Comp Cams Camshaft #34-331-4 Specs: http://www.compcams.com/Cam_Specs/CamDetails.aspx?csid=989&sb=2
Also have double chain timing set with harmonic balancer for it as well. - $100 for all
Ford crankshaft 2y (needs one of the rod journals polished) Internally balanced - $30
MSD Ignition Box MSD 6A - SOLD
MSD Coil Blaster 2 $30
Pm me on here or feel free to give me a call 760-576-7152 Robert
68
Boat Showcase / Re: TX 19 youngblood
« on: March 12, 2010, 08:10:10 PM »
Hell yeah Brian looking bada$$
69
Boats For Sale / Re: 1976 eliminator jet 18'
« on: March 08, 2010, 06:50:09 PM »
That is one CLEAN float. Good luck with the sale!
70
The No Wake Zone / Re: How much to tip?
« on: February 28, 2010, 07:22:05 PM »
The thing with the paid wages is that 99% of restaurants only pay minimum wage because they are counting on the waiters and waitresses making tips. So the actual pay checks are worthless. I worked at a tony romas for 6 months as a second job and if it wasnt for the tips i made the job wouldnt have been worth it. However, I do agree that they should simply be paid a higher wage and the tips shouldnt even be apart of paying.
Oh and you cant leave out the classic tip, dont eat yellow snow!
Oh and you cant leave out the classic tip, dont eat yellow snow!
71
Engine Mechanical / Electrical / Re: Ford 460 D1ve
« on: February 16, 2010, 07:43:45 PM »
Awesome!! I am definitely looking forward to it. I have basic mechanical knowledge but there is always room to learn more thats for sure.
72
Engine Mechanical / Electrical / Re: Ford 460 D1ve
« on: February 15, 2010, 06:42:43 PM »
Oh and yes Paul weekend after next will definitely work.
73
Engine Mechanical / Electrical / Re: Ford 460 D1ve
« on: February 15, 2010, 06:42:10 PM »
Oh okay cool. I thought that that was letting water into the block and mixing with the oil. It looked as though the block had actually been broken right there because of the jagged edges on it.
74
Engine Mechanical / Electrical / Re: Ford 460 D1ve
« on: February 15, 2010, 07:55:24 AM »
Well after spending some time today tearing down the rest of the block and checking it out it looks like I need a new block now too . Im pretty sure that this hole is not supposed to be there....
. Im pretty sure that this hole is not supposed to be there....
75
The No Wake Zone / Re: Newbies chime in please
« on: January 24, 2010, 06:05:08 PM »
For some reason all of the gps's i have bought after about 6 months of use start routing me the longest route possible. Including having me make circles through residential neighborhoods, making me exit and get back on the freeway (on the same offramp). Its rediculous. Thats why costco is the best place to buy them. Once they start to act up just return it and buy a newer model. 