This year I ran it on the hose and got it hot, about 180 for about 5-10 minutes. Change the oil and filter and do it again to burn off any water in the motor.  Pulled the carb and put a block plate on the manifold. Let it cool and pulled water lines off the logs and snails and blew them out with water, pulled the plugs off the motor and flushed it out with the hose and cleaned the bilage while it was blasting water out if the motor. Pulled the plugs and fogged the cylinders and put the plugs back obviously. Pulled the battery out and put it back in my chevelle. Completely drain the tanks and disconnect fuel lines at the tank. Then let the boat dry out for a day or two after the water show and put some thick plastic over the motor then another layer over the entire boat followed with a tarp. Trailer on jack stands and put the rims/tires in the garage and let the air out of them. Done then next year ill service the hubs on the trailer and put it back together and go.


Sent from my iPhone using SoCalJetBoats

Those hard miles means its been worn into jet boat motor specs lol. So those three inches is that over all or three inches either side? If it's over all your good to go if its three inches each side well it will be fun manhandling the hose but it will work either way


Sent from my iPhone using SoCalJetBoats

If your looking to go fast Sevans I have a 871 with a ford manifold on my bench


Sent from my iPhone using SoCalJetBoats

We call him marbles.


Just updated



Sent from my iPhone using SoCalJetBoats

Didn't post again


Sent from my iPhone using SoCalJetBoats

Pic didn't post last time


Sent from my iPhone using SoCalJetBoats

Blow through baffle. only one, don't ask why it just is


Vintage berk nozzle. Vintage is just a nice way of saying old as hell


Sent from my iPhone using SoCalJetBoats

Tired of all the random crap laying around taking up space. I just filled a 30' car hauler with crap my wife or I will never use or remember we have so its time to start shit caning things.

I'm gonna randomly post items as I find them and all parts are on the make an offer basis and pick only unless your willing to pay packaging and shipping.


Sent from my iPhone using SoCalJetBoats

Being a step father for almost two years gave me an idea of what it was like to be a father but having one of my own proved how wrong I was. It's been a short first year but we will be celebrating her 1st birthday on November 30th


Sent from my iPhone using SoCalJetBoats

I doubt seriously I will be challenged on this. 
 LOL

GT

Challenge accepted...........with tandem axles linked like they are don't both axles share the same ammount of load unless one has bottomed out?


Sent from my iPhone using SoCalJetBoats

I'd try to save the gel on it before shooting it with paint


Sent from my iPhone using SoCalJetBoats

Sorry man, didn't check my email. responded with my address.   


Bump. Make offers guys. I'm gonna have to stick this crap in a storage unit with the rest of my stuff and don't want to get a bigger unit than I have to


Sent from my iPhone using SoCalJetBoats

If I remember correctly J&M speed center in riverside has a distributor machine that crew chief is talking about. There all pretty knowledgable there and good people but Steve helped me tune my chevelle in the parking lot there a few years back so if ya can talk to him.


Sent from my iPhone using SoCalJetBoats