BBC custom tunnel ram injection set up (Tall Deck has thick flange so can be machined for STD deck)

Dart polished tunnel Ram with professional low profile front throttle body conversion and machined for fuel rails and injectors, manifold is ported to Victor/MUSI CNC rectangle port(we can match to regular rectangle ports if needed at no extra charge)

Engine it was on was a 565ci and with HYD roller cam made 820HP

Comes complete with the following parts
complete wiring loom with mecrusier plug and plug for direct MSD 6M plug in!
MEFI ECU with 820HP tune up
MSD coil
EFI Distributor
ALL sensors and MAP
SX Fuel pump
SX fuel filter
SX regulator

$2850 OBO inc shipping within USA

Great condition Superchiller complete with SS studs and ARP nuts, chiller is polished with new AN fittings and SS plugs

$1200 FIRM

Just saw these posts
This was a one of kit a customer traded in for 10.5:1cr pistons


We do supply Racetec pistons with Total Seal ring packs
 4032 alum (SRP)
flat top kit $750
Dome kit $800
Dish kit $800

2618 alum (JE)
Flat top kit $900
Dome kit $950
Dish kit $950

All kits come with Total Seal plasma moly file fit rings
Gapless and Advanced profile sets also available

BBC blown 532ci 1000HP

Specs
Block Dart Sportsman 4.600 bore
Crank Crower forged 4.000 stroke
Rods Manley H Beams 6.385 with ARP
Pistons Racetec
Rings Total Seal Plasma moly
Crane cam 254/262-112
Lifters Crane direct oil pressure roller bearings
Push rods 3/8 Moly
Rockers Crane Gold 1.7 ratio
Stud Girdle Lunati
Brodix 365 rectangle port heads
Head gaskets Fel Pro MLS
Oil pan 12qt Canton with Melling HV pump
Distributor MSD billet
Carb 2x Quick Fuel 950s
$18950 Dyno'd

Engine is being assembled pics to follow, This engine is built with ALL NEW PARTS!!!
your welcome to come check the engine out while being assembled, estimated engine will be complete 8/30

BBC 540ci Gen VI engine

Specs
Block 502 bored 4.530
Crank RPM forged 4.250 stroke
Rods RPM H Beams 6.385 with ARP
Pistons SRPs
Rings Totat Seal Plasma moly
Cam Comp Extreme Marine 248/254-112
Lifters Comp Cams
Push rods 3/8 Moly
Rockers Crane gold 1.7 ratio
Head 088s with stainless valves Comp springs retainers & locks
Head gaskets Fel Pro Marine
Oil pan 8qt with Melling HV pump
Distributor MSD billet
Intake Edelbrock Victor JR
Carb Quick Fuel 950
Painted Mercury blue
$8950 Dyno'd

Engine is being assembled pics to follow, your welcome to come check the engine out while being assembled, estimated engine will be complete 7/28

We have a Mercury BBC Gen VI 502ci HP500 with low hrs for sale

Recently rebuilt with upgraded Crane Cam Lifters and Gold rockers, engine runs great and ready to install!!!

Pics show with headers and accessories, These DO NOT COME with the engine, we are selling engine carb to pan ONLY

$7500

SOLD!

New built 600ci BBC $3000

This is a NEW built trade in from a customer, we are selling off cheap as we like to build our engines with ALL new parts and STD cranks!!!
 we have checked bearing clearances and piston to bore, also pulled a piston to check ring gaps, all clearances and ring gaps are to our specs so good to go,Torque has been checked on ALL rods and mains! this engine looks like it was well built and good for up to 850HP+!!!


Specs
Block GM bowtie Gen VI Tall deck 4.605 bore
Cranks Crower 4.500 stroke forged ground 030/010 with Speed Pro competition bearings
Rods are NEW H beam 4340 with ARP 8740 bolts
Pistons NEW Racetec 4032 with Total seal Plasma Moly rings CR 10:1

$3000 ASIS

NOTE due to the fact we did not machine or put this together we are selling ASIS no warranty or returns, this would be a $6000 short block if all was new and we built it so at $3000 its a steel!

NEW Weiand SBC polished 6/71 8/71 blower intake

$450

Selling a Pair of CJ/BDS Holley 750 blower carbs, these were built by CJ engineering for BDS, they came off a running engine and are good to use right away or rebuild and freshen up! comes with stainless fuel lines as pictured.

$800 OBO

REDUCED $600

Selling a Pair of CJ/BDS Holley 750 blower carbs, these were built by CJ engineering for BDS, they came off a running engine and are good to use right away or rebuild and freshen up! comes with stainless fuel lines as pictured.

$800 OBO

$1000 off see main ad 

Hardcore BBC 524ci Engine  8/71 blower  2x Quick Fuel 850s 847HP on  91 octane
Engine is dyno'd and ready to install

Engine specs
502 Gen V block bored and honed with torque plate, block is square decked and finished for Cometic MLS gakets, ARP main studs and align honed
Crank GM forged, crank was checked and polished STD/STD then heat treated
Rods Manley H beam with ARP2000 bolts
Pistons Racetec Forged flat tops(static CR 9:1)
Rings Total seal TNT plasma moly 1/16 1/16 3mm
OIl pan Canton 10 qt with HV pump and HD drive
Cam Custom Hyd Roller Hardcore Extreme Marine
Comp billet timing set
Lifters Crower Solid roller ( cam runs a tight lash of .006 so no need to adjust every trip)
Pushrods Trick Flow 3/8 moly
Heads Hardcore polished Brodix custom ported with severe duty valves and Comp premium springs, retainers and locks
Comp Pro Magnum rockers
Crane stud girdle
Polished Marine valve covers
Blower Shop 8/71 blower set up with teflon seals by Monty at Maddog blowers
Quick Fuel Race Brawler 850 carbs
Polished Dual scoop
MSD Pro billet distributor and MSD wires
Pro Race SFI damper with ARP bolt

$13,500$1000 off $12500 season project starter 

We can take your old motor running or not in trade!!!

Hardcore Racing & Marine Engines, Call Andy 909 851 8251