thanks man.

does it help slow boat down at end of pass?

(sorry, im writing a book )  joking, pardon the 20 questions

Haha no worries, I don't mind.
The pop off slows the boat down at the end of the run. 👍👍 the black thing on the clean out of the pump


Sent from my iPhone using SoCalJetBoats mobile app

Got that all dialed in now. Drilled and tapped a 1/2 20 hole and got the air ran to work and pivot good. Next I'll drill some holes for the diverter up stop. Iam going to send the arm and bucket to Embee on Monday. 👍👍👍


Sent from my iPhone using SoCalJetBoats mobile app

just curious....why an air ram?  are you using air to actuate f/r....?  would that be a full forward/full reverse application only....no 'neutral'?

Iam using this in a drag racing app so only need forward and neutral. But yes, also there's not really a neutral on normal set up boats, but yes there would only be f/r


Sent from my iPhone using SoCalJetBoats mobile app

COIL IS SOLD!!! Thanks SCJB!!!


Sent from my iPhone using SoCalJetBoats mobile app

Thanks bud. This is the first one I have ever done so I know I am asking some newbie questions so thanks for all the help.


Sent from my garage drinking a cold PBR

If you have any questions don't hesitate to ask me or Wes. Here on the boards.


Sent from my iPhone using SoCalJetBoats mobile app

The engine is off the stand and in the morning it will be loaded in the truck with the heads and all the other parts and taken down to Bostick. Can't wait to get this engine process moving forward. And still have the question I put up yesterday about the supports under the bow. Is that there for extra support or is that in all boats?


Sent from my garage drinking a cold PBR

they are for extra support and so the deck doesn't sag from the weight.


Sent from my iPhone using SoCalJetBoats mobile app

More importantly would be if it were to break at speed and flip the boat.

Exactly joe. It's a good habit to get into guys. 👍👍👍


Sent from my iPhone using SoCalJetBoats mobile app

Same here for the grade 8 bolts 5/16ths. I use the grade 8 flat washers and nylocks only because lucas and ADBA tech requires it. Don't use slotted hardware use Allan's 👍👍👍👍
Also it's a good idea to check your loaders guys. I inspect mine each night with red dye to check for cracks. http://m.grainger.com/mobile/product/CRC-Weld-Check-Penetrant-48J408


Sent from my iPhone using SoCalJetBoats mobile app

You the man buddy


Sent from my iPhone using SoCalJetBoats mobile app

ha yes I knew you had one and hated it. Chris says those BJ's are the chet!!👍👍


"RTCP"

They are worth every penny


Sent from my iPhone using SoCalJetBoats mobile app

Bennett hydraulic diverter pump with relay and wiring to switch. No lines. Works great upgraded to faster diverter. -$225 obo

Splitbowl parts-$$$$freeeeee no shipping you pick up.

Dennis -909664351seven


"RTCP"

Good choice on the pump 👍👍👍👍


Sent from my iPhone using SoCalJetBoats mobile app

Got a new toy for the race boat.


Sent from my iPhone using SoCalJetBoats mobile app

1984 Tahiti. Hardin and Caribbean made the same hull. It is a real solid and heavy boat for what it is. 18ft long

Here is a pic of the exact same boat: http://www.vintagejetboats.com/showthread.php?5547-Caribbean-Hardin-Marine

I would try it out. Also a place Diverter if you don't have one already.


Sent from my iPhone using SoCalJetBoats mobile app