Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - SoCalPSD

Pages: 1 ... 33 34 [35] 36 37 ... 78
851
Just pull it, strip it, check out the cylinders pistons rods and crank, maybe throw a fresh set of rings on it and a quick dingle berry hone job on the cylinders put a new cam in it and slap it back together and run it. Shouldn't cost more than a couple hundred

852
Hulls / Re: eliminator bubble deck speed??
« on: June 10, 2013, 08:07:25 AM »
also does it matter if i still wave the bowl on upside down? i wouldnt think so? but just a thought? the mounting holes that were for the ride plate witch i thought were the grease fittings are still on the top?

Well if its upside down how do you put oil in the bowel? I'd spin it around the right way

This is not true. I spun my stainless "A" to 6000 RPMs all day long.

Only problem with this statement is you forgot to include your boat was bad@ss and had a beast of a motor

853
SoCal Lakes / Re: where do you launch at lake elsinore?
« on: June 10, 2013, 07:29:32 AM »
Just don't slip on that ramp. It will get ya good.

854
SoCal Lakes / Re: Last minute trip to Elsinore today!
« on: June 10, 2013, 07:26:06 AM »
Lol yah you know I am.

855
SoCal Lakes / Re: Last minute trip to Elsinore today!
« on: June 09, 2013, 10:36:53 PM »
Yah the white float with the long blond hair chick driving was Jordan................."dude looks like a lady yaaaa yaaaa"

856
Random Boat Parts For Sale / Re: Some stuff for sale
« on: June 09, 2013, 07:34:00 PM »
And my polishing wheel blew up, I'll have it done tomorrow afternoon or Tuesday.

And I'm trying to make the BR trip but its leaning more twords the no. And I haven gone through all the boxes of hardwear Ralph but I'm gonna say no until I have them in my hand

857
Random Boat Parts For Sale / Re: Some stuff for sale
« on: June 09, 2013, 05:54:53 PM »
Yo troubled, shoot me a pm with your number and ill give you a call when I'm done polishing

858
Engine Mechanical / Electrical / Re: Water pressure
« on: June 09, 2013, 02:41:31 PM »
All it does is relieve excess pressure ;) doesn't control flow homes


How many times you gonna smack a dead ho?

859
Hulls / Re: eliminator bubble deck speed??
« on: June 09, 2013, 02:34:40 PM »
Pull the droop off and give it a shot

860
Random Boat Parts For Sale / Re: Some stuff for sale
« on: June 08, 2013, 07:32:03 PM »
2 rims, not the best shape but tires hold air good for spares 50 bucks for the pair

861
The No Wake Zone / Re: Total noob question
« on: June 08, 2013, 03:15:11 PM »
Ill fish in the morning and drag a tube and knee board in the afternoon but come 1-2 if I'm not on my way home ill hide on the back left side of the island if your looking at it from the beach you were on and just drop anchor and float and swim. Perris gets packed quick and normally there's like 10 guys to one seadoo so I try to stay away from the beaches

862
The No Wake Zone / Re: Total noob question
« on: June 08, 2013, 12:10:43 PM »
I saw your float out at Perris last week, looked good. But I generally have to toss out almost 50 out to get any anchor to hold at Perris, other wise it just pulls right up.

863
Random Boat Parts For Sale / Re: Some stuff for sale
« on: June 07, 2013, 10:30:20 PM »
I wouldn't see why not, and my misteak these are the moon style breathers. I could also polish these up

864
Cars / Automobiles For Sale / Re: 2012 VW GTI
« on: June 07, 2013, 10:52:37 AM »
I have seen and ridden in this car. It is immaculate inside and out, Jordan takes very good care of his sh!t.

865
Jet Pumps / Re: What Silicone to use ?
« on: June 07, 2013, 07:49:00 AM »
I was wondering whats the best silicone to use I have a set back pump with custom plates so I don't want to get the wrong stuff.

Dude just start chewing gum now in a week you'll have enough to seal that thing up tight

866
WarZone / Re: Baseball ....
« on: June 07, 2013, 07:44:18 AM »
RAIDERS!.........oops

867
Random Boat Parts For Sale / Re: Some stuff for sale
« on: June 06, 2013, 10:51:03 PM »
. Polishing is available for a few extra bucks. Could have this thing looking like a mirror

868
Random Boat Parts For Sale / Re: Some stuff for sale
« on: June 06, 2013, 10:48:51 PM »
Center to center is roughly 10 1/8.

869
Random Boat Parts For Sale / Re: Some stuff for sale
« on: June 06, 2013, 09:19:37 PM »
Most of the rust will wipe right off but there's a few spots where it's on the metal. wouldn't hurt to put some oil in it and let it soak and it with a wire brush

870
Random Boat Parts For Sale / Re: Some stuff for sale
« on: June 06, 2013, 06:00:41 PM »
Got some mo stuff

Dooley 460 oil pan, pick up and wind age tray 250

Dooley dual carb scoop comes with cover 150

Bbf 460 block, crank, rods (w/ old pistons) clay smith cam most likely no good, flywheel, starter 200

460 mt valve covers w/ offenhouser breathers 120

Berkeley intake w/ original grate 100



871
The No Wake Zone / Re: So........
« on: June 06, 2013, 10:32:33 AM »
Thanks guys, it really is hard and they are family. That dog slept at the foot of my bed and on my bed his entire life. He went just about everywhere with me and was always by my side. But in the last 8 months he really started slowing down and the last 3 it really hit him hard. I was suppose to bring him in to be out down this morning and had been preparing for it for the last week and when my wife called me yesterday I thought it was a fuked up joke because she straight up said "Sonnys dead in the back yard". And as soon as I got home and saw him it hit hard. But he's not in pain anymore, he's running around again and happy and I know it. He was the perfect dog.


872
The No Wake Zone / So........
« on: June 05, 2013, 07:12:51 PM »
Today I lost my best friend of 14 years........and it fukin hurts, I got him as a puppy when I was 10. Wife called me this afternoon at 250 to tell me my dog had died and was laid out in the back yard. I knew today was too easy. And Now after returning from the vetI'm 6 beers into the hour and kicking back in the boat waiting for this weekend

873
Random Boat Parts For Sale / Re: 5 degree wedge and stock Berk noozle
« on: June 05, 2013, 12:59:14 PM »
I was thinking king cobra........oh I'm gonna be sick

874
Random Boat Parts For Sale / Re: 5 degree wedge and stock Berk noozle
« on: June 05, 2013, 12:21:17 PM »
10 bucks and a 40 yo

875
The No Wake Zone / Re: Random Rant
« on: June 05, 2013, 09:09:08 AM »
As much as i would like to agree with you, i cant. Free speech man!   If you dont want your kids to see it , turn it off.   At some point your kids make choices you just hope the choices that they make will be good ones. And that my friend is where we as parents come in. If we have done our job, the choices they  make will be the right ones!

And I could agree with you more. Just like you said as parents we are responsible, just hope that was what we say sticks and they make the right choices.

But no need for me to turn it off, no cable in my home ;). Just Netflix and DVDs. I do my best to make sure my kids know right from wrong and I don't want some garbage on my tv to contradict what I'm saying. One of the many reasons I try to be the man I want them to marry and as far as movies and tv, I don't watch anything that my family can't sit down and watch with me. You will most likely never see anything on my tv with a rating higher than PG.

Pages: 1 ... 33 34 [35] 36 37 ... 78

Null

SMFPacks CMS 1.0.3 © 2026