1
Interior / Re: Type of wood for sub floor?
« on: July 12, 2016, 10:30:25 AM »
Wtf!! If you guys don't know what you're doing please don't give advice!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Engine Mechanical / Electrical / Motor mounts
« on: September 08, 2012, 12:13:30 PM »
My question is are 4 point all that much better then 3 point mounts??
I was thinking about keeping the 3 point but make a rail just to spread the load a little..
I was thinking about keeping the 3 point but make a rail just to spread the load a little..
3
Engine Mechanical / Electrical / Sharkhide
« on: July 29, 2012, 08:42:13 PM »
I've used it on wheels before. And a rack on a semi works amazing. But have never used it on engine stuff where it gets hot. I've tried alsa clear for chrome but is really hard to spray out smooth and keep it wet. The alsa is really cool because you can add kandy kolors to it to change the polished to a anodized but better then look. Aka kandy chrome.
4
Engine Mechanical / Electrical / Sharkhide
« on: July 29, 2012, 07:05:26 PM »
Has anyone used this stuff on intakes,carbs, ect.
https://sharkhide.com/cart/index.php?main_page=index&cPath=1
https://sharkhide.com/cart/index.php?main_page=index&cPath=1
5
Engine Mechanical / Electrical / MSD or Mallory ?
« on: July 28, 2012, 07:18:14 PM »
Mallory and msd are both made over seas now.
6
Projects / 79 Anthony
« on: July 26, 2012, 08:11:44 PM »
When I flip it I'm airbrushing a beach seen with a stripper poll and a fine ass lady doing her thing.. On the top side not to sure yet? But I'm going all out.. This is my personal boat so I can have some fun with her!!!
7
Projects / 79 Anthony
« on: July 26, 2012, 09:09:49 AM »
I was wondering about that. Just drill a hole and feed it threw? Then seal up the holes? I already drilled a hole in the back when I got the boat to get all the water out!!
8
Projects / 79 Anthony
« on: July 25, 2012, 11:08:13 PM »
Haven't even seen it in person yet.. Pick it up tomorrow.
10
Projects / Engines out; polishing starts
« on: July 24, 2012, 11:00:09 PM »
Have you ever used shark hide? Seen it on tv and looked pretty good? Wipe on app.. As a protected finish over the polished.. On there web site they have a polish too.. Anyone use this stuff? Wonder if it holds up to heat or gas.. Would be nice on a polished carb!!!
11
Try Rex Marine, they bought all of L&L' s aluminum rub rail and insert material when they went out of business.Ok thank you.
13
Mini Jets / New Little Toy Addictor Mini Boat
« on: July 24, 2012, 09:17:10 PM »
There's one on the Columbia that runs a 75. I've ridding in it and I have to say I wanted one..
14
Projects / 79 Anthony
« on: July 24, 2012, 08:55:01 PM »
Thanks guys...
My interior guy is calling it Miami fukin vise! Lol And a friend of mine thinks I should name the boat hazardous material. Wait tell you guys see what I'm doing to the bottom of this thang! Lol
My interior guy is calling it Miami fukin vise! Lol And a friend of mine thinks I should name the boat hazardous material. Wait tell you guys see what I'm doing to the bottom of this thang! Lol
15
Projects / 79 Anthony
« on: July 24, 2012, 06:25:57 PM »
Jacob Kaysen in cashmere Washington. He built them from scratch (new wood foam) for $2000 there French seam gray stitch, welt only on the sides where it meets the boat. I think he did to good of a job!! Makes the rest of the boat look like crap!! Lol
And thank you..
And thank you..
16
Projects / 79 Anthony
« on: July 24, 2012, 02:22:48 PM »
Got my seats done on my Anthony today.. The 402 is still at the machine shop. Just dropped the trailer off at my mechanic to do the bearings.. I'm thinking the seats are to plain but maybe they will grow on me. Before pic and after.
17
The No Wake Zone / Kids ears?!?
« on: May 01, 2012, 05:04:18 PM »
Lol I guess that's one way of thinking..
Love it loud though!!! Lol
Love it loud though!!! Lol
18
The No Wake Zone / Kids ears?!?
« on: May 01, 2012, 11:30:45 AM »
Do you guys make your kids wear ear and eye protection?? I got a 2 year old and she really wants to go!! And it's hard to get them to keep the ear weights on or the plugs in.. anybody got any tricks?? Super glue ect? Lol
Eyes I got pretty much covered via the strap on..
Eyes I got pretty much covered via the strap on..
19
Jet Pumps / Running pump out of water..
« on: May 01, 2012, 12:04:54 AM »
Why is it bad on a pump to run it out of water? I've done in the past and get grief for it!!! Ive never done it for very long as my motor runs on gas not alcohol!! But I've never had any problems....
20
Engine Mechanical / Electrical / 99 454 vortec
« on: April 26, 2012, 07:08:59 AM »
On the 8.1 ive found a dart carb intake and has dis. hole.. Friend has one in he's 3500 and says its nothing different the the old 496 with vortec heads?? But!! Yeah.. Bolting headers. Bell. The little things.. I can get the 8.1 for $750 it has 50,000 on it.. Intake is $575
21
Engine Mechanical / Electrical / 99 454 vortec
« on: April 25, 2012, 10:12:00 PM »
I have a 99 454 and was wondering if anyone has ran one in a jet.. I also know of a 8.1 for pretty cheap.. What all do I have to do to run one of these???
22
Jet Pumps / Energizer kit worth it?
« on: April 19, 2012, 10:30:51 PM »
I love the panther pump.. Don't get why people dis on them¿!¿ I've mostly owned berks.. And have had some bad luck with them.. And they are fun seeing how high you can make your tail.. And scaring the kids on the tube.. Lmao!!
There mom was pretty mad at me that day!!! Lol
There mom was pretty mad at me that day!!! Lol
23
Jet Pumps / Energizer kit worth it?
« on: April 17, 2012, 06:14:24 PM »
I've been thinking about doing this to my panther... Anyone have any thoughts??
I've just seen numbers,
I've just seen numbers,
24
Trailers / Boat cover.
« on: April 17, 2012, 05:45:17 PM »
That sucks.. Too short.. Story of my life!! Lol thanks for trying tho.. Very cool of ya..
25
Trailers / Boat cover.
« on: April 16, 2012, 03:31:44 PM »
That looks good.. Super clean.. There's a shop up here and I stop and asked today and the guy said it would be around $1,500.00.... I told him he was high!