1
Engines / Engine Parts For Sale / Re: Gale Banks twin turbo
« on: August 23, 2021, 07:13:04 PM »
Sold
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Engines / Engine Parts For Sale / Gale Banks twin turbo
« on: July 07, 2021, 11:56:59 AM »
Gale Banks twin turbo parts for sale!
4 Rajay E-10 turbos
2 pairs of exhaust risers
1 pair of pfm exhaust risers
1 Banks carb box
1 Scahill carb box
1 intercooler box and cover plate
2 Harrison intercooler cores
2 boost tubes
2 turbo heat shields fresh chrome
2 water cooled exhaust dumps
1 Holley carb setup for draw through by carb shop
2 Chevy logs
Parts are located in Rancho Cucamonga many of them are still wrapped up from the polisher.
Asking $4000 willing to deal some but not give them away.
If you only want the kit and not all the spare stuff we can work out a price.
Also looking for big block Chevy parts for partial trade.
Sent from my iPhone using SoCal Jet Boats mobile app
4 Rajay E-10 turbos
2 pairs of exhaust risers
1 pair of pfm exhaust risers
1 Banks carb box
1 Scahill carb box
1 intercooler box and cover plate
2 Harrison intercooler cores
2 boost tubes
2 turbo heat shields fresh chrome
2 water cooled exhaust dumps
1 Holley carb setup for draw through by carb shop
2 Chevy logs
Parts are located in Rancho Cucamonga many of them are still wrapped up from the polisher.
Asking $4000 willing to deal some but not give them away.
If you only want the kit and not all the spare stuff we can work out a price.
Also looking for big block Chevy parts for partial trade.
Sent from my iPhone using SoCal Jet Boats mobile app
8
Random Boat Parts For Sale / Imco fuel tanks
« on: May 23, 2017, 07:00:10 PM »
I have a pair of imco stainless round tanks. 11.5 gallons with new brackets. Need to be cleaned up a bit one is dented on end of tank. Asking $500 obo
Sent from my Z981 using SoCal Jet Boats mobile app
Sent from my Z981 using SoCal Jet Boats mobile app
9
Hulls / Re: 1977 Spectra 19 hull advice
« on: May 20, 2017, 02:06:43 PM »
I've gone back and forth with the same thing on mine, also a spectra.
I think after the cost of stringers and gell in my case it may be cheaper and less down time to build a new hull.
Sent from my Z981 using SoCal Jet Boats mobile app
I think after the cost of stringers and gell in my case it may be cheaper and less down time to build a new hull.
Sent from my Z981 using SoCal Jet Boats mobile app
11
Engine Mechanical / Electrical / Re: Ceramichrome headers
« on: May 18, 2017, 09:42:02 AM »
I've had great luck with Sam at Young guns powder coating in rancho Cucamonga. They take the time to really prep and blast all their parts.
Sent from my Z981 using SoCal Jet Boats mobile app
Sent from my Z981 using SoCal Jet Boats mobile app
12
The No Wake Zone / Re: What did you do to your boat today?
« on: May 14, 2017, 07:12:05 PM »
Spent some time cleaning up the boat this weekend. Didn't make it on the water though.
Sent from my Z981 using SoCal Jet Boats mobile app
Sent from my Z981 using SoCal Jet Boats mobile app
13
Gelcoat / Paint / Fireberglass Repair / Re: Sub floor vs stringers
« on: May 10, 2017, 12:01:29 PM »They seem fine outside but idk inside. I really don't want to have to worry about it though. I just want to be able to pull up to any pump cali or az or wherever and fill up and go, so aluminum it is.Do you plan to have new tanks built or source some that are close enough?
Sent from my SM-G920T using SoCal Jet Boats mobile app
Sent from my Z981 using SoCal Jet Boats mobile app
15
Boat Showcase / Re: 1976 Southwind Day Crusiser Restoration
« on: May 08, 2017, 08:15:41 PM »
I really like the balsa core swim steps! Whole thing is coming out great !
Sent from my Z981 using SoCal Jet Boats mobile app
Sent from my Z981 using SoCal Jet Boats mobile app
16
Random Boat Parts For Sale / 12* casale v-drive
« on: May 04, 2017, 12:44:47 AM »
I have a complete but disassembled casale 12 degree split case v-drive. It comes with left hand 18% gears a tach drive and shifter. I also have a drive shaft to go with it from inland drive line, it measures roughly 2' collapsed. I'm asking $600 obo
Sent from my Z981 using SoCal Jet Boats mobile app
Sent from my Z981 using SoCal Jet Boats mobile app
17
SoCal Lakes / Re: Green drink
« on: May 04, 2017, 12:19:17 AM »I had a custom hydraulic roller made by Engle Cams. It made 880hp and 962ft lbs tq with iron heads.That's more than I expected!
Sent from my iPhone using SoCal Jet Boats mobile app
What kind of boost, compression, and cubic inches is it?
Sent from my Z981 using SoCal Jet Boats mobile app
18
SoCal Lakes / Re: Green drink
« on: May 03, 2017, 11:26:21 PM »Here's a few pics of my setup. I've learned a ton about these twin turbo setups feel free to ask me any questions if u need to.Thanks man, I too was going to try and avoid cutting another hole for a pickup.
Sent from my iPhone using SoCal Jet Boats mobile app
What cam did you end up settling on?
What kind of power did it end up making?
I'll definitely hit you with some more questions when I get a bit closer!
Thank you!
Sent from my Z981 using SoCal Jet Boats mobile app
19
SoCal Lakes / Re: Green drink
« on: May 03, 2017, 10:15:24 AM »Made it out for my first test run with the new motor. Boat runs hard and I couldn't be happier.Very nice! Post some pictures of the turbo set up if you can please I'm getting stuff together now to do mine.
Sent from my iPhone using SoCal Jet Boats mobile app
Where did you end up pulling water from for the intercooler?
Sent from my Z981 using SoCal Jet Boats mobile app
20
The No Wake Zone / Re: SCJB on two wheels...
« on: May 02, 2017, 09:36:43 PM »
Are they still around? I know they were in rancho off jersey for a long time?
Sent from my Z981 using SoCal Jet Boats mobile app
Sent from my Z981 using SoCal Jet Boats mobile app
22
Hulls / Spectra / crusader
« on: April 30, 2017, 06:41:35 PM »
I currently own a spectra 19 that I'd like to restore and add a bit more power.
I've been debating the cost of that and the downtime to just buying a new hull from crusader since they own the mold.
Does anyone have any info about crusader.... Are they quality boats? Easy to work with ? How do they last long term? Or any other opinions about keeping mine and dumping the money into it.
Thanks in advance!
Sent from my Z981 using SoCal Jet Boats mobile app
I've been debating the cost of that and the downtime to just buying a new hull from crusader since they own the mold.
Does anyone have any info about crusader.... Are they quality boats? Easy to work with ? How do they last long term? Or any other opinions about keeping mine and dumping the money into it.
Thanks in advance!
Sent from my Z981 using SoCal Jet Boats mobile app
23
The No Wake Zone / Re: Boat dolly
« on: April 04, 2017, 11:41:08 AM »
I just got rid of my spare spectra trailer. Would have been perfect for you
Sent from my Z981 using SoCal Jet Boats mobile app
Sent from my Z981 using SoCal Jet Boats mobile app
24
Gelcoat / Paint / Fireberglass Repair / Re: Sub floor vs stringers
« on: April 01, 2017, 02:48:23 PM »
Do you intend to replace the tanks? What kind of shape are they in?
Sent from my Z981 using SoCal Jet Boats mobile app
Sent from my Z981 using SoCal Jet Boats mobile app
25
The No Wake Zone / Re: New project!
« on: March 29, 2017, 06:53:38 PM »
Cool! I would have picked it up If I had the space, I'd like to restore mine but don't want to miss a season either.
Sent from my Z981 using SoCal Jet Boats mobile app
Sent from my Z981 using SoCal Jet Boats mobile app