Looking for a life vest like lifeline with the higher back neck support but don't want to pay lifeline prices, just need something for my neck, it kills me end of the day and few days afterwards, please PM me im rarely on here it will go to my cells inbox, thanks

are these still available? Please PM me I'm rarely on here, i'll get the email, thanks

I have a used holley blue fuel pump used it for a week then took it off.
$100.00

Text or call 760-486-8712 anytime.

you think I'm running out of voltage from the HEI?, that means I would have to run a points dist,?

Apparently I didn't read the whole post. I would change the coil to a msd blaster 2 and see if that helps.


Sent from McIntyre Park

 Hello,
Who here runs nos on their boat?

I'm having a little problem past week with it, I can only get a 2-5 second burst with it when pushing the button and feel the nos kick in then it pops a little through the headers NOT violent then falls flat, I have timing set at 33, plugs are burning nice NO peppering or lean or rich, plugs are gapped right now at 32, we went from a 5-9 spread in jets and still does it.

we thought it might be the button and arming switch ( which were cheap low amp ones ) we switched those out to higher amps, but haven't taken boat out since sunday ( easter )

to see if that was the problem? I talked with a well known builder in my area he said bump gap down to 25, were gonna start off at 28 first, and plug the vacuum advance then try it out maybe tomorrow depending on weather. I tripled checked the wiring its fine and I am using a relay, we are stumped at this time what it could be? I'm even using a separate fuel pump electric holly blue with regulator and we flowed the fuel with a gauge for 61/2 pounds, and when we do hit the NOS its not dropping.

motor is a 468 BBC mild build, edelbrock performer 2.0 intake with a predator carb., Dist, 65,000 with a Mallory coil HEI 92 pump gas. I'm only wanting to squeeze 100-125 shot longer than 2-5 seconds.

Any other areas to check or suggestions?

Thanks for any info, or help

Hello,
I finished up installing my NOS kit, we fire up the boat testing the fuel solenoid to see if my mechanical fuel pump would work, pressure dropped motor stumbled. after de arming it was fine, my friend said think you need to run a holly red or blue just for the nitrous only since it can't feed the carb and fuel solenoid at  same time. I run a fuel switch for both tanks so I can run on 1 tank then switch to other. then 1 main line to the mechanical pump,

MY question is: after the fuel filter from main line can I " Y " it off to feed the electrical pump then up to the NOS fuel solenoid? Then when I arm the NOS system it kicks on the electrical pump? It's not like im gonna be squeezing all day long just a cpl burst when im feeling excited lol. Then when I de arm the NOS system it kills the electrical pump, Does this sound about right?

Or does anyone else have a better idea? I DON'T want to run 1 tank just for nitrous.


BTW I can pick up a holly blue with regulator...

Also I'm running 125 shot according to edelbrock there plate runs 6.5 pounds?

Thanks for any help or suggestions, and if you have any diagrams would help? LOL

Was reading threw this post about needing baffles on silverwood, I been going every other weekend depending on weather, testing stuff and I have NO problems at all, they don't even ask or look when you pay to get in, they just check the bildge area for water, so make sure if you go up there its dry or they won't let you on unless you have the green inspection tag then your good. I run open no baffles at all and mine is LOUD and never had a problem, we went up valentines day, was a few other boats and seadoos out, had a great time

like this one? http://www.cpperformance.com/p-13612-4300c-cable-clamp-style-maxflex-extreme.aspx

 I called CP last week he said most likely a 14ft or look for the stamp on the cable with numbers that will tell for sure, it must be hiddin between the seats and where top of fuel tanks are or just measure from handle to where it goes in the back.

is this still for sale?

If you come down on price let me know.

Victorville.  lol

Thankyou, do I just measure up how long and wide I need, then call them?

I use Tap Plastics almost exclusively.

Hello,
First time jet boat owner, Were looking for a complete 454, nothing to crazy or big $$$ lol, just something to get me and my gf on the water, If anyone knows or has one for sale please let me know, Even if it needs a little work to get it going is fine aslong as it don't need major over haul. Thanks for reading..

P.S. I'm up in the 760 area, v.v av, hesp, area