Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Pgp88se

Pages: [1]
1
Project Boats For Sale / Re: 66 Byers V-Drive
« on: January 31, 2024, 07:44:32 AM »
Ok engine is out, boat needs to go. everything else is there. Casale vdrive, driveshaft shield, cables, controls, prop shaft. price dropped to $1000 come and get it. the vdrive or trailer alone is worth that. i just dont wanna oull it all apart and scrap the boat and piece it out, id rather sell it whole.

2
Project Boats For Sale / 66 Byers V-Drive
« on: July 15, 2023, 08:34:26 PM »
Someone needs to take this thing off my hands. I purchased years ago. Was a beautiful, magazine article boat in the late 80s. I wanted it to have a Pontiac powered boat to go with all my Pontiacs. I haven?t had it in the water for at least 4 years. I?m pulling the engine tomorrow morning. It will be sold minus engine! Everything else, marine specific parts, I will leave with it. Unless the buy doesn?t want it. Trailer will need tires, upholstery is still in good shape, just really dirty, will clean up nice. cover is good. Trailer has permanent Cali tag, no title. Ask me any questions, I?ll answer the best I can. Asking $2000, let?s make a deal and get it out of my way.

3
The No Wake Zone / Re: Curious about value
« on: August 07, 2021, 07:31:20 PM »
here are a few pics, the gold engine is long gone and if i decide to sell the other boat it will be engineless as well

4
The No Wake Zone / Curious about value
« on: August 06, 2021, 07:25:51 PM »
So I’m curious about what my boat is worth. I’ve been thinking of selling one or both boats I have. I just wonder what the market is for them. I just don’t use them much anymore and hate to let them sit around and rot. One boat is a 67 Byers 16’ flat bottom vdrive, bought this cause it was a Pontiac powered boat, turns out it was featured magazine years ago. Not sure I’m ready to part with it, and if I do it’ll probably be minus engine.
The other boat is a 75 spectra 21’ jet. Was setup for olds, but of course, was a bad engine. Was working on a Pontiac powered boat there too.
Both need work but are water worthy, I’ve had them both out a few years ago. If you guys can give me an idea of what to expect value wise without engines, it will help me decide what I wish to do with them. I have so many other car projects that I don’t have time for the boats right now.
Thanks for any reply’s

5
Engines / Engine Parts For Sale / Oldsmobile parts for sale
« on: May 31, 2016, 04:52:21 PM »
I have some Oldsmobile parts for sale or trade.prices are plus shipping. Willing to meet to save shipping. Manifolds and elbow flanges don't match. Interested in velvet trans or v-drive with reverse.
Front engine mount with feet $150
Rear engine mount with feet $150
Manifolds $125
Elbows $175

6
WTB / Re: WTB or trade
« on: May 17, 2016, 11:22:07 AM »
It's a 66 Byers flat bottom. Interested most in it for "brakes" and use around the dock more than anything else

7
WTB / Re: WTB or trade
« on: May 17, 2016, 03:46:55 AM »
Let me double check the shed, I know I have Hardin marine manifolds, should have a water pump plate and front and front and rear mounts ( plate for front of engine and bell housing both aluminum).

8
WTB / Re: WTB or trade
« on: May 15, 2016, 04:22:58 PM »
No but I will look into it, thx

9
WTB / WTB or trade
« on: May 15, 2016, 02:56:33 PM »
I'm looking to add reverse to my vdrive, interested in either a trans setup or just a gearbox with reverse. Willing to trade my in out gearbox if needed. Also have Hardin marine olds manifolds and maybe a few other olds parts.

10
Projects / Re: Need some help finding mounts
« on: January 26, 2016, 10:56:57 AM »
Quote from: RushinEliminator17 on January 26, 2016, 10:48:53 AM
I have a few sets, as a matter of fact I also have the entire bracket with good bushings in it.

Bushings alone $25/pair or $45 for the bracket with them in it. Plus shipping.

I'll take just the bushings, sent you a pm thanks!


Sent from my iPhone using SoCal Jet Boats

11
Projects / Re: Need some help finding mounts
« on: January 26, 2016, 10:43:54 AM »
104 in the duagram is exactly what I need

Quote from: RushinEliminator17 on January 26, 2016, 08:18:33 AM
I'm almost certain this guy has a jacuzzi pump and is looking for the rubber bushings numbered "104" in the diagram.

I have a few good ones if my guess is correct.


Sent from my iPhone using SoCal Jet Boats

12
Projects / Need some help finding mounts
« on: January 26, 2016, 04:37:19 AM »
I have a 75 spectra that was olds powered, I'm switching to pontiac power and noticed when pulling the olds out the the rubber mounts on the bell housing to pump housing mount are just trashed, the rubber is split with chunks missing. Does anyone know where I can find these? A search online isn't turning up anything.

13
Engines / Engine Parts For Sale / Re: Olds engines and parts
« on: October 30, 2015, 10:55:34 AM »
Sorry other set is g not d and I'm not splitting anything right now

14
Engines / Engine Parts For Sale / Re: Olds engines and parts
« on: October 30, 2015, 08:59:13 AM »
One set is b other set is d

15
Engines / Engine Parts For Sale / Olds engines and parts
« on: October 28, 2015, 06:12:00 PM »
I have a running 350 olds engine in boat now, all mounts go with engine. Also have two 455 blocks one .030 over the other .060 over, with four heads two cranks, one set of .060 pistons and rods, new rings, bearings for one crank(undersized already) enough stuff to rebuild a good 455 or possibly two if you wanted to do the work on the .060 block. All three engines and parts for $600. This stuff needs to go asap.

16
Project Boats For Sale / Re: Rayson craft project for sale
« on: October 25, 2015, 06:47:27 PM »
Boat sold, engines still available if someone is interested

17
Project Boats For Sale / Re: Rayson craft project for sale
« on: October 19, 2015, 05:30:51 AM »
I'm not interested in parting the boat out just yet, I would like to sell the whole thing complete.

18
Project Boats For Sale / Re: Rayson craft project for sale
« on: October 18, 2015, 04:47:11 PM »
Located in golden valley,AZ close to kingman, AZ

19
Project Boats For Sale / Re: Rayson craft project for sale
« on: October 17, 2015, 08:05:39 PM »
Hit the post button by mistake, I bought this for the engine and engine parts, I don't need the rest. Everything else is there. Boat has not been registered in over 15 years, AZ game and fish said and inspection and they will register no problem. Looking to get $600 for what u see in the pictures, if interested I have a running 350 olds installed in my jet boat now. And two 455 olds, one rebuildable one that is .060 over already. Looking to get another $600 for all three engines and extra parts.

20
Project Boats For Sale / Rayson craft project for sale
« on: October 17, 2015, 07:58:32 PM »
From everything i can see on the paperwork this is a 69 rayson craft vdrive, I bought

21
V-Drives / Need a little help please
« on: July 27, 2015, 07:06:48 AM »
I just bought a 66 byers with the strut hanging loose. My question is what bolts do I need to reattach the strut?

Pages: [1]

Null

SMFPacks CMS 1.0.3 © 2026