1
The No Wake Zone / Re: Taylor SJ
« on: July 27, 2017, 11:02:12 AM »
anybody?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
The No Wake Zone / Taylor SJ
« on: June 22, 2017, 12:00:13 PM »
Hi,
Don't read much about Taylor SJ jet boats. Anybody have any thoughts about them? thanks
Don't read much about Taylor SJ jet boats. Anybody have any thoughts about them? thanks
3
Engine Mechanical / Electrical / ZZ454 spark plugs
« on: September 20, 2016, 11:07:39 AM »
Hi, Can you guys recommend a spark plug for a zz454 Aluminum head engine? Being these engines run cooler Id like to hear your recommendations
Thanks
Thanks
4
Engine Mechanical / Electrical / Re: BBC head bolts
« on: July 05, 2016, 06:58:06 AM »
Dan'l did you have this problem with aluminum heads?
thanks!!!
thanks!!!
5
Engine Mechanical / Electrical / BBC head bolts
« on: July 05, 2016, 05:12:27 AM »
Need Advice on head bolts. I have a 454 V1 with aluminum heads. Bought headers and they hit the bottom 4 head bolts. Their about a 1/4 inch too high. So I need to change to a lower profile old type hex bolt. Any advice? I believe I still need to have washers under the bolt.
Anybody have this problem?
thanks in advance
Doug
Anybody have this problem?
thanks in advance
Doug
7
Engine Mechanical / Electrical / Bassett headers
« on: June 22, 2016, 06:37:11 AM »
Hi Guys,
New to jet boating (need some advice) currently have a 454 with log exhaust, thinking of installing the bassett headers. I notice on some of your beautiful boats both long and short collectors. Any advice on which one? Its a 85 Taylor SJ Model. Do the muffers work good? thanks
New to jet boating (need some advice) currently have a 454 with log exhaust, thinking of installing the bassett headers. I notice on some of your beautiful boats both long and short collectors. Any advice on which one? Its a 85 Taylor SJ Model. Do the muffers work good? thanks
8
Boats For Sale / taylor SJ
« on: June 02, 2016, 12:47:37 PM »
Hi, new to forum.
We bought a taylor SJ (1985) BBC, Dominator pump. I see several comments on Hallet, Miller, etc. Any feedback is appreciated . Thanks
We bought a taylor SJ (1985) BBC, Dominator pump. I see several comments on Hallet, Miller, etc. Any feedback is appreciated . Thanks
9
Engine Mechanical / Electrical / Re: engine choice
« on: May 18, 2016, 06:38:26 AM »
thank you crewchief22
10
Engine Mechanical / Electrical / Re: engine choice
« on: May 17, 2016, 10:17:27 AM »
HI Dan'l
motor is shot need long block. Performance goal, large oval ports. I run a 468 in a 68 vette with aluminum heads which works great. Whats your opinion of aluminum heads for the boat engine? thanks and by the way thanks again for your imput on removing the engine came right out.
motor is shot need long block. Performance goal, large oval ports. I run a 468 in a 68 vette with aluminum heads which works great. Whats your opinion of aluminum heads for the boat engine? thanks and by the way thanks again for your imput on removing the engine came right out.
11
Engine Mechanical / Electrical / Re: engine choice
« on: May 17, 2016, 09:51:52 AM »
Anybody recommend a supplier for a short block with large oval intake ports? thanks
12
Engine Mechanical / Electrical / Re: engine choice
« on: May 17, 2016, 08:07:53 AM »
thanks need to know more about marine applications.
13
Engine Mechanical / Electrical / engine choice
« on: May 17, 2016, 07:56:44 AM »
Hi , I'm new to current jet boats. I had a couple in the 70"S but need your imput on current engine choices. We bought a 1985 taylor with a 454 CI with a dominator pump. Took it out but sucked a valve. Need new short block. Do I need a marine short block? not looking to race but want decent power, running msd, air gap oval intake and 800cfm.Any suggestions?
thanks
Doug
thanks
Doug
14
Engine Mechanical / Electrical / Re: BBC engine removal
« on: May 10, 2016, 12:27:59 PM »
Thank you Dan. Look like I might have to remove back seat. Any other tips? Can I unbolt the U joint through the access? Hole on the bell housing? Then unbolt bell housing? My wife just bought this boat and came apart after one run.
thanks again
thanks again
15
Engine Mechanical / Electrical / BBC engine removal
« on: May 10, 2016, 12:06:08 PM »
Hi New to forum..
Trying to remove BBC from a Dominator jet pump. How far does the spline engage into the pump, as I only have inches to move forward in a Taylor SJ. Any help is greatly welcomed!
thanks
Doug
Trying to remove BBC from a Dominator jet pump. How far does the spline engage into the pump, as I only have inches to move forward in a Taylor SJ. Any help is greatly welcomed!
thanks
Doug
Pages: [1]