Hi all! My stepdad has a Berkeley jet and is searching for a fast, reliable, dependable spot near Ridgecrest Ca to get his jet rebuilt. Maybe something in Bakersfield or Palmdale/Lancaster area. Any recommendations?


Sent from my iPhone using SoCal Jet Boats mobile app

I think I might have found one local guys thank you though


Sent from my iPhone using SoCal Jet Boats

Still have the pump?


Sent from my iPhone using SoCal Jet Boats

Sweet guys thanks for the insight! I'm gonna start on the pump today. I've already ordered the rebuild kit and it's on the way. The 460 is running pretty well for now. My plan is to rebuild the pump put it all back together and take it out for a test run prior to dragging it all the way to Laughlin!!


Sent from my iPhone using SoCal Jet Boats

Ok so I'm new to the jet boat scene and I need to replace the thrust bearing on the WJ. I have no idea where to start the year down. Any suggestions? Also I am located in Chandler Az does anyone know where these parts are readily available?


Sent from my iPhone using SoCal Jet Boats

Another issue I have is I'm missing one of these caps on the water side of the motor. First off what are these caps called? And second where can I get one and third...does the motor need to come out to replace it?


Sent from my iPhone using SoCal Jet Boats

I realize the driveline is missing. What I'm concerned about is the bearing cap on the pump. I believe it should be sitting flat against the housing. The gap I pointed to is what makes me think it's loose and may need to be looked at.


Sent from my iPhone using SoCal Jet Boats

Ok so as I look more into this project of mine you were right, the bearing cap was out of place because that was the bearing that went out in the first place and why the boat was parked. That's why the driveline is off as well. So It looks like I will need to replace the bearing and get new u joints and reinstall the driveshaft. Any other recommendations? This website has been very helpful so I want to thank all of you for your support!


Sent from my iPhone using SoCal Jet Boats

Awesome thanks for the insight dangerfield


Sent from my iPhone using SoCal Jet Boats

Alright so maybe I have this all wrong. It might not be the bearing that went out. It is the part that connects the jet to the motor that went bad. If you look closely at the pictures you can see it's missing. I have all the pieces I'll try and post them later. Like I said any help is great for me good or bad.


Sent from my iPhone using SoCal Jet Boats

Greetings SCJB! I am new to the jet boat  scene but I've been checking out this forum for quite some time totally creeping! Here's my story...my stepdad gave me his 75 omega 19' mini day cruiser I believe a few years ago. About 5 years ago it ran great and we took it out often until the bearing between the motor and the jet went out so he parked it and let it soak under the sun in the hi desert for a few years until he offered it to give it to me which I could not pass up. So he recently bought another jet boat that we took out a few times this past summer and it's got me all fired up to wrench on this one. Here's my dilemma, I don't know a whole lot about this boat and we have a family get together in Laughlin with a few other boats in 2 weeks and I would love to bring this one. I recently got the motor fired up and it runs pretty good for sitting for such a long time but still needs a lot of loose ends tightened up. I'm looking for any and all advice/assistance on getting this thing going in 2 weeks to bring to Laughlin. I'm not looking to have the best float on the water by any means, all
I am doing right now is simply trying to "polish the turd" to bring it for one weekend. I'll post pics and hopefully this post will help me out. Thanks everyone and any advice will help good or bad!


Sent from my iPhone using SoCal Jet Boats