1
Projects / Re: Transom plates
« on: November 30, 2018, 03:18:59 PM »Looks like she will clean upPm sent
Sent from my iPhone using SoCal Jet Boats mobile app
Sent from my iPhone using SoCal Jet Boats mobile app

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Looks like she will clean upPm sent
Sent from my iPhone using SoCal Jet Boats mobile app
Hi:I really hope he is. Please let me know if you locate him. Thanks.
Last post I see is 2016, are you still doing this? Tried writing direct, but have not heard back.
I need a couple of the Crusader with rabbit.
Thank You, Steve at Carisma carisma@razzolink.com
Anybody ever seen one of these babies? Just picked it up out of Wisconsin. Cool little fun early jet boat.
Well shit fellas, number behind the mental tag had been sanded off. Measured the boat and it’s an 18ft. Got ahold of the auction company and the boat is going back with a full refund. Not worth the hassle of trying to straighten out somebody’s cover up. 🤷♂️Good choice. I almost lost a day cruiser with the same situation. Took a month of tracking the builders back from 1977. Luckily they were out of jail and there was a hin stamped underside the right side of the hull.
Sent from my iPhone using SoCal Jet Boats
Good lookin boatCould it be opportunity knocking?![]()
Sent from my SM-J727T using SoCal Jet Boats mobile app
What u don’t want me anymore lover boySpectralen, did you get this figured out?
Sent from my iPhone using SoCal Jet Boats mobile app
Does it have the added sponsons in the front? I believe that really helped the boat have a stable shut down.No it doesn’t. I’ve read a lot about the great possibilities of being tossed out.
Sent from my iPhone using SoCal Jet Boats mobile app
Let me hit up Tim place and see if he has oneGood morning. Any luck with Tim Place? Your pretty much my last resort before I switch it over to a teleflex system.
Sent from my iPhone using SoCal Jet Boats
What’s the modelIt’s a mercury set up with a ride guide cable. 12’ stamped on the black casing.
Sent from my iPhone using SoCal Jet Boats
Not to hi-jack the thread.. but where'd you get the metalflake done at? Is it paint or gel??No worries. It’s gel and was super faded from the sun in California.
Sent from my iPhone using SoCal Jet Boats mobile app
That is the same Mercury steering I have. I will try to get down to my storage today or tomorrow to check the length.Cool. Thank you
Let me hit up Tim place and see if he has oneThat would great! Big thank you.
Sent from my iPhone using SoCal Jet Boats
I've got one of those mechanic stethoscopes and placed it on the fuel pump when running and didn't notice anything but I do have a spare to try. I'm going to try pulling plug wires one at a time and see if I can narrow it down to a certain cylinder. It might be an exhaust leak on the bottom side of the logs. No gaskets, just silicone.Stop! Replace the exhaust gaskets first!!
Also yes, in case your motor decides to not run for whatever situation. It allows the impeller to spin freely. Meaning the pump is still spinning pushing the water through as you begin to decrease speed because your powerless. Therefore you don’t nose dive as hard.Anyone know at what rpm the clutches lock up?
Sent from my iPhone using SoCal Jet Boats
