Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Dyer

Pages: [1] 2
1
The No Wake Zone / Re: What did you do to your boat today?
« on: July 16, 2021, 08:48:31 AM »
Me and my daughter did a Intake manifold gasket swap out

Sent from my SM-N960U using SoCal Jet Boats mobile app


2
Fabrication / Re: 1974 Hondo Jetboat
« on: July 08, 2021, 08:07:33 AM »
Me either, i have tride with no luck as well

Sent from my SM-N960U using SoCal Jet Boats mobile app


3
Arcade / Re: Water in Valves..
« on: June 28, 2021, 05:26:35 PM »
That sounds like a good possibility. I had a shop that i will not say rebuild the carb, timing, and get to ideal just before this trip.
Thank you for the help

Sent from my SM-N960U using SoCal Jet Boats mobile app


4
Arcade / Re: Water in Valves..
« on: June 28, 2021, 11:55:29 AM »
Just ran it first time after cam break in and on the water. Everything is new and just had carb rebuilt as well. Did not take the valve off yet but took the filter off and looked on the bottom and yes, milk shake. This was the very first lap after the build and had fresh oil in it as well.

Sent from my SM-N960U using SoCal Jet Boats mobile app


5
Arcade / Re: Water in Valves..
« on: June 28, 2021, 08:45:34 AM »
I could only take a picture of the video

Sent from my SM-N960U using SoCal Jet Boats mobile app


6
Arcade / Water in Valves..
« on: June 28, 2021, 08:40:05 AM »
So i took the boat out to get wet Sunday ( Pine Flats ) and after a lap my buddy noticed water bubbling from my breather filters and dropping on my headers a little. Could this be from running my water valve to open that feeds and cools my headers or is it a blown gasket someplace? I have a video of it happening on the water but can not post video?

Sent from my SM-N960U using SoCal Jet Boats mobile app


7
Central Valley / Re: Lake Success June 10-13 2021 Boating and camping
« on: May 20, 2021, 06:55:36 AM »
Quote from: mscatena on May 18, 2021, 09:03:51 AM
Last few years the only inspection was from cadaver dogs "sniff test" never water or other stuff. Kinda weird but it's not a clean or dirty lake so they have been really relaxed, plus once they recognize you they just start waving you thru.
Cool just moved up that way so have to check it out

Sent from my SM-N960U using SoCal Jet Boats mobile app


8
Central Valley / Re: Lake Success June 10-13 2021 Boating and camping
« on: May 13, 2021, 07:51:39 AM »
Quote from: mscatena on May 10, 2021, 10:32:50 AM
Would be great to see a BUNCH of jets!
We have four sites booked (corner nearest the kiosk/big ramp) for the entire weekend, come out and join us say hi!

Hope to unvail/christ'n the 75' Sanger SuperJet

@76Mantra455
They do a boat inspection to get on the water?

Sent from my SM-N960U using SoCal Jet Boats mobile app


9
Arcade / Re: Lake Lopez
« on: May 13, 2021, 07:50:08 AM »
Quote from: 75fantasy on May 09, 2021, 05:02:32 PM
Do they still have a rec center? Water slide?


Sent from my iPhone using SoCal Jet Boats
Yes they do and a bar. They have a lot to do there. All the rec stuff ooens in May i believe

Sent from my SM-N960U using SoCal Jet Boats mobile app


10
Arcade / Re: Lake Lopez
« on: May 13, 2021, 07:48:56 AM »
Quote from: mahony.2469 on May 09, 2021, 12:14:34 PM
I go to Lopez a lot,I live 20 mins away....The wind there is inevitable after I'd say 1 pm. especially in the beach area cove....I tend to hang at the back half of the lake a lil less  wind.

Sent from my 5032W using SoCal Jet Boats mobile app
I will be back and have to keep that in mind for next time.

Sent from my SM-N960U using SoCal Jet Boats mobile app


11
Arcade / Lake Lopez
« on: May 05, 2021, 08:10:41 AM »
Does anyone go to Lopez Lake and if so when the best time to go. Was there last weekend and it was windy as hell

Sent from my SM-N960U using SoCal Jet Boats mobile app


12
The No Wake Zone / Re: Buena Vista Lake
« on: February 17, 2021, 08:54:17 AM »
Quote from: 76Mantra455 on February 04, 2021, 04:14:02 PM
I like going there since its close.....I have been going to the jet ski side to launch and anchor and spend the day over there..don’t have all the waves just beating your boat while your trying to BBQ...just gotta deal with the 5mph zone out of the jet ski area and its good
I do the same thing.

Sent from my SM-N960U using SoCal Jet Boats mobile app


13
Jet Pumps / Re: Droop Snoot
« on: February 17, 2021, 08:47:21 AM »
Thanks a lot guys. The boat is new to me so gotta work out the bugs. I qill see what she does and go from there. I was looking to get some more top end on it. On the rebuild i am sitting around 535 to 550 hp and am pretty sure the jet is a stock set up. I have heard that you use a droop to keep the jet lower in the water lol. It going to Menace Marine beginning of this coming month to tune her up then the water. I will watch to see if it vibrates when i throttle down. Motor is balanced so that will leave the jet. Thanks again guys and any info helps.Hope to see some you guys out there this year.

Sent from my SM-N960U using SoCal Jet Boats mobile app


14
Jet Pumps / Re: Droop Snoot
« on: February 13, 2021, 05:01:33 PM »
Just want to build the jet some and make sure the jet stays in the water. I guess I should start with doing the inpeler and may add a inducer? I am new to the jet boat seen so don't really know. I just rebuilt the motor so figured that be next

Sent from my SM-N960U using SoCal Jet Boats mobile app


15
Jet Pumps / Droop Snoot
« on: February 12, 2021, 07:53:29 AM »
 Are Berkeley Droops universal and how you know if you need a full droop or mini droop?


Sent from my SM-N960U using SoCal Jet Boats mobile app


16
SoCal Lakes / Re: Buena Vista
« on: October 15, 2020, 11:08:14 AM »
I go out there myself. I just finished building my motor as well and have just ran for 20 min to break in the motor and cam. Have to adjust my Valves and carb but should get it done soon. See you out there some time

Sent from my SM-N960U using SoCal Jet Boats mobile app


17
Engine Mechanical / Electrical / Re: Royal Purple
« on: September 24, 2020, 09:11:04 AM »
Thanks guys, as i mentioned before. I am new to the game and thanks to my motorbuild i have learned a lot already ( woth a price aaaaaaaaaand upgrades ) .

Sent from my SM-N960U using SoCal Jet Boats mobile app


18
Engine Mechanical / Electrical / Re: Royal Purple
« on: September 24, 2020, 09:09:02 AM »


Sent from my SM-N960U using SoCal Jet Boats mobile app


19
Engine Mechanical / Electrical / Royal Purple
« on: September 23, 2020, 08:49:42 AM »
Okay fellas, what are all your thoughts on this product for a fresh start up. I have been told by EVERYONE to do my VR1 with a Zink additive and a Local shop ( Hawaii Racing) says that this is the stuff to use and the only thing that they use for motor break ins even though it is a Synthetic? And Gooooooo
 Thank you for all input

Sent from my SM-N960U using SoCal Jet Boats mobile app


20
Jet Pumps / Re: Help...
« on: August 31, 2020, 08:10:16 AM »
Quote from: angermgmt on August 28, 2020, 06:43:05 PM
When you pull the head that piston will be trashed. Valves may be ok.  Bin there done that.


Sent from my iPhone using SoCal Jet Boats
Got dam...

Sent from my SM-N960U using SoCal Jet Boats mobile app


21
Jet Pumps / Re: Help...
« on: August 31, 2020, 08:09:50 AM »
Quote from: FordLover on August 28, 2020, 06:27:03 PM
Lol. Agreed.

I am totally guessing here.........dropped a valve and totally F'd piston, cylinder and damaged spark plug. Full rebuild! But of course every rebuild needs upgrades and new goodies. Well at least that is what I tell my wife. Lol

Sent from my LM-Q730 using SoCal Jet Boats mobile app
Good guess. Told my wife the same hahaha

Sent from my SM-N960U using SoCal Jet Boats mobile app


22
Jet Pumps / Re: Help...
« on: August 31, 2020, 08:00:50 AM »
And THIS is the damage that it caused....
 Sooooooo, got a new block, was able to salvage my aluminum heads, new pistons, rings, custom cam, lifters, valves, barrings, and everything else inside the motor. So now i know everything in the motor and that it is all NEW lol. ( With upgrades for sure ) this weekend will be in Parker baby..

Sent from my SM-N960U using SoCal Jet Boats mobile app


23
Jet Pumps / Re: Help...
« on: August 31, 2020, 07:52:58 AM »
This is what happened. This little fucker broke off and was banging around with cylinder 8 and finally wedge itself in the dam block...

Sent from my SM-N960U using SoCal Jet Boats mobile app


24
Jet Pumps / Re: Help...
« on: August 27, 2020, 08:29:16 AM »
Yeah mannnnnn, took a minute but me and the fam be back on the water baby. Thanks bro

Sent from my SM-N960U using SoCal Jet Boats mobile app


25
Jet Pumps / Re: Help...
« on: August 26, 2020, 09:30:12 PM »
Well i finally got her back. New block, pistions, rings, Custom Cam, lifters, barrings, ( the works ) should be back in the boat and get her first start up this weekend and hopefully if goes well Parker Labor day weekend

Sent from my SM-N960U using SoCal Jet Boats mobile app


Pages: [1] 2

Null

SMFPacks CMS 1.0.3 © 2026