Boat is posted up for sale in STR8 up toy trader, time for something a bit bigger for the parker strip.

https://str8uptoytrader.com/listing/2021-23-deck-tahiti-offshore/

Bump for 65k obo gotta get this sold

Sent from my SM-G955U using SoCal Jet Boats mobile app

SBC & BBC Custom built Hardcore Alum heads

All heads are purchased bare and custom assembled by us here at Hardcore, the reason we  buy the bare is we can match springs accurately with your cam specs or cam we pick for you($100 off your cam if you buy heads and cam together!

On our Hardcore heads these are built with budget with quality parts in mind(Castings are made by RPC, these are NOT Pro Comp heads!), we use good quality PEP valves and springs with options to upgrade to Premium valves and Comp/Lunati springs.

SBC Hardcore 205cc with 2.02/1.600 Stainless steel valves PEP springs for Hyd flat tappet $795
Upgrades Premium Valves $100, Comp/Lunati springs $50, HYD roller springs .600 lift $100,  CNC ports 215cc $450
Dyno results on these heads un-ported on a mild 383 were 435HP 470lb ft, On a  383ci with mild hand port and with 6/71 and 2 Holley HP 750s was 632hp and 555lb/ft(see pics of dyno graph), both on 91 octane.

BBC Hardcore 335cc with 2.250/1,88 stainless steel valves PEP springs for Hyd flat tappet $1395
Upgrades Premium Valves $100, Comp/Lunati spring kit $80, Hyd roller springs.650 lift $120, Hand porting $450
Dyno results on engine #1 496 pump gas mild custom Hardcore Hyd roller cam 640HP 599lb/ft, Engine #2 496 with Comp  Extreme Marine custom Hardcore grind 658hp 606lb/ft both 91 octane.

PM sent

Sent from my SM-G955U using SoCal Jet Boats mobile app

I had to make one for mine as well I used brass pipe from home depot with couplings so I can break it down and it fits in my tool box. Once u have droop that zerk is a bitch ha ha.

Sent from my SM-G955U using SoCal Jet Boats mobile app

Buddy of mine is in need of a droop for his legend pump. Lmk who has one condition and pics

Sent from my SM-G955U using SoCal Jet Boats mobile app

Hello. Does anyone have an opinion on staying at Best Western in Ehrenberg az. Where would you launch from. Does water level change much. Have a 21ft ultra jet that sits pretty low. Going July 20-21. Anybody else? Thanks.

Kinda loud with all the traffic, stay at best western Sahara or clarion inn in Blythe, you can launch out of the cove. You will be fine with your boat AMD knowing how to read the river. We may be there that weekend as well.

Sent from my SM-G955U using SoCal Jet Boats mobile app

With a few of the boys at IN N OUT cruise night, enjoyed the seat time on the Harley

Sent from my SM-G955U using SoCal Jet Boats mobile app

We launch at both mac and also cove, cove is doing major work in the lagoon so should be really nice

Sent from my SM-G955U using SoCal Jet Boats mobile app

Has anyone been to Elsinore?


Sent from my iPhone using SoCal Jet Boats

If all goes well with motor and pump we will test there Sunday

Sent from my SM-G955U using SoCal Jet Boats mobile app

You might have better luck in parker or even havasu and it's not to bad of a drive from Blythe up m, my boat is there as well

Sent from my SM-G955U using SoCal Jet Boats mobile app

Bad ass!

Sent from my SM-G955U using SoCal Jet Boats mobile app

Bunch of us are rolling maybe 3 or so boats

Sent from my SM-G955U using SoCal Jet Boats mobile app

I use a box anchor for my 21 open bow no chain just rope and a danik hook at the bow to adjust for different locations. Box anchors are bad ass and my .02 no chain needed

Sent from my SM-G955U using SoCal Jet Boats mobile app