Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - sandman

Pages: [1] 2 3 ... 5
1
Engine Mechanical / Electrical / Re: need help puzzled
« on: September 23, 2012, 01:53:37 pm »
Thanks guys looking into it now.

2
Engine Mechanical / Electrical / need help puzzled
« on: September 15, 2012, 11:41:09 am »
 :banghead: ok guys hears the deal built my motor up a couple seasons back and it has been flawless. have taken it to el cap 3 times this season with no issues but decided to make a trip to the river and started blowing oil out the breather and getting warm not hot but ran up to 180 which it never does! :screwy: so i pulled up to the sandbar and took a quick look I had oil on the driver side only coming from the valve cover breather so I just decided to enjoy the weekend get a tow, trailer it, and catch a ride with friends. now im home and pulled the plugs number one cylinder got hot but all other plugs look fine can someone help shed some opinion on this. should I tear it down? it doesnt even wanna crank over now and the motor only has like 100 hours maybe!......Mike

3
Topock / Laughlin / Re: avi trip june 28th-30th pointers!
« on: June 01, 2012, 01:24:15 pm »
Holy crap sounds like a pain hey aquoholic I may have to grab you just for navigation puposes! lol!!!!!
Hey I thought that the water level was good around 8:00 or 9:00? my hang out is lower river fishers and hidden shores it gets pretty shallow there too but dont have any rocks to worry about sound like I may need to follow someone???

4
Topock / Laughlin / avi trip june 28th-30th pointers!
« on: June 01, 2012, 12:18:21 am »
Hey guys Im launching out of the the avi at the end of june first time taking the nordie out there any pointers? I wanna head to pirates cove saturday and chck out all the local wildlife whats the 411?

5
Random Boat Parts For Sale / Re: ****WTB**** HYD PLACE DIVERTER
« on: April 20, 2012, 11:12:00 am »
ok guys update: well looks like I need a low profile elite model so if by chance someone out there has one used in good condition hit me up! :thumbup:

6
Jet Pumps / Re: Finally Got New Jet Boat
« on: April 20, 2012, 11:05:03 am »
 :thumbup: :thumbup: :thumbup: :beer:

7
Random Boat Parts For Sale / Re: ****WTB**** HYD PLACE DIVERTER
« on: April 20, 2012, 09:38:12 am »
Thanks brad I was just on the phone with tom at jbp. I saw on forums that ralph is running into issues with his hitting the swim step so I think im gonna have to go with the low profile elite model there goes $800 bucks! I was hoping I could convert a standard PD to low profile but tom sais its not worth it its too expensive  :-\ just gonna suck it up and buy a new one I think :banghead:.

8
Jet Pumps / Re: hyd, diverter help
« on: April 20, 2012, 08:45:28 am »
Ralph this is not good news we have the exact same boat and I am getting ready to do this same project if you have any pointers at this point let me know! I never thought this would be a problem but I may go with the elite low profile version to avoid this issue!

9
Random Boat Parts For Sale / Re: ****WTB**** HYD PLACE DIVERTER
« on: April 20, 2012, 08:17:01 am »
Contact Ralph Brunt. I think he had one for sale. :thumbup:

thanks flytime I will drop him a message!

10
Random Boat Parts For Sale / Re: ****WTB**** HYD PLACE DIVERTER
« on: April 20, 2012, 08:15:40 am »
Dude I bought my boat from has a manual set up and he says I can get it whenever. Haven't talked to him in a while, but if you're interested I'll hit'em up.

Sent from my ADR6400L using Tapatalk

Ya hit em up see what he wants thanks!

11
Random Boat Parts For Sale / ****WTB**** HYD PLACE DIVERTER
« on: April 19, 2012, 04:39:45 pm »
Hey guys getting my taxes back in a week and its time to put a diverter on my float! If you have one or know someone who does can you shoot me a message even if its a  cable unit that I can change over to hyd will work for me thanks Mike :beer: :beer:

12
Lower River / new years
« on: December 28, 2011, 08:07:00 am »
Anybody thinking about fishers for new years? Think I might take the boat out and do some bbq and fishing on the sandbar could be cool weather shows 76 but oooooh the waters cold!

13
Jet Pumps / Re: What aspects of pump improve hole shot and speed??
« on: July 08, 2011, 02:19:03 am »
Call Tom at Jet Boat Performance he will be able to answer any questions you may have! jetboatperformance.com

14
Jet Pumps / Re: need guru opinions!
« on: February 10, 2011, 09:14:25 am »
Thanks Tom, Im sure I will be in touch. This project does not seem overwhelming just wanna make sure I take all the proper steps and complete this pump properly and now seems to be the best time to install that place divertor ive been wanting so let me know guys if anyone has a descent deal going on one.

Mike

15
Jet Pumps / Re: need guru opinions!
« on: February 10, 2011, 08:45:12 am »
Thanks Nordie, Im gonna pull the pump this weekend and start disassembly. I will keep you guys busy with questions I'm sure and will post pics of progress.

16
Jet Pumps / need guru opinions!
« on: February 09, 2011, 10:53:14 pm »
Ok guys I think its time for a pump rebuild. Last season started getting some whining out of the pump and tried to pull a tube and the boat just fell on its face cavitating matter of fact if I tried to hole shot it it would just cavitate but if I slow rolled it and got it up on plane it would get me where I need to go and still maintain a great top speed 62-65 mph. Be honest I already have a gutt feeling anyway! I wanna do this rebuild myself I just enjoy knowing every nut and bolt I havnt done one in the past but wouldnt mind saving the money on a pump rebuild from a local shop. give me the need to knows!

Mike

17
Lower River / hidden shores
« on: September 22, 2010, 12:20:20 pm »
Yuma this weekend who's going I will be at hidden shoresfri afternoon :thumbup: should be a nice mild weekend

18
Lower River / Re: Yuma Power Tour ????
« on: September 22, 2010, 12:16:57 pm »
I'm in! can't wait I missed last year and heard it was awsome!

19
Random Boat Parts For Sale / Re: Pat's pile of "sunken" treasures
« on: September 02, 2010, 10:32:37 pm »
Pat did you sell gas pedal #2 im interested

20
Boat Showcase / Re: My new 21
« on: September 02, 2010, 10:07:15 pm »
Maybe a dumb question but what hull is that? your boat is effen awsome might be interested in that hull in the near future!

21
Random Boat Parts For Sale / wtb 750 dp holley
« on: July 16, 2010, 01:22:24 am »
hey guys does anyone have a 750 dp they wanna get rid of? i need to replace my vac sec carb.  even if i have to go thru it

22
Gelcoat / Paint / Fireberglass Repair / Re: started wet sand and buff
« on: June 16, 2010, 06:14:07 pm »
looks awesome juat sprayed the last 3 coats of clear and now will start color sand and buff my project yours is inspiring  :thumbup:

Thanks farmergord, 
      I am really stoked about my project it is coming full circle now next is the sound system!

23
Gelcoat / Paint / Fireberglass Repair / Re: started wet sand and buff
« on: June 16, 2010, 12:51:19 am »
i dare you to get started in a small portion of the hull when you see it bling out you will find the dedication its not that bad

24
Gelcoat / Paint / Fireberglass Repair / Re: started wet sand and buff
« on: June 16, 2010, 12:32:15 am »
not that bad really 2 weekends off and on maybe about 12 hours i guess it wasnt that bad really i would hate to have to do it on a larger boat i could see it taking alot longer

25
Gelcoat / Paint / Fireberglass Repair / Re: started wet sand and buff
« on: June 15, 2010, 11:44:00 pm »
Thanks guys!
Ok heres the low down
1. started with a bucket of water washed the boat well with some meguires car wash
2. fresh pail of water with a little dawn liquid soap and started wet sanding with 1000 grit for first cut, as your rubbing boat water gets milky but you can feel the paper working at first it is a little sticky and ruff but as you work paper you can feel the finish smooth out. I continued the same way with the rest of the boat.
3. fresh pail of water some more dawn and performed same steps with 2000 grit. paper feels the same i kept working till i got same smooth consistency over the whole boat.
4. washed the boat completely down with meguires car wash again.
5. spent some money here, went to harbor frieght and bought a variable speed buffer actually a really good deal 37 bucks and it comes as a kit with some wool pads and terry cloth pads I ended up spending about 75 bucks cause i purchased some extra wool pads and a pack of terry clth towels.
Ok next step and I think it was the best I used a finishing compound made by 3M called "finesse it" its designed as a fine rubbing compound for removing swirls in high end paints it definetly did the trick on the boat you can get it at most detail supply houses.
Started out with a wool pad at lower speeds to apply and would slowly increase speed to buff out it worked terrific.
6. After completely buffing boat washed again with meguires car wash and dried.
7. last but not least I used a cleaner wax from west marine i was gonna use meguires but i heard that there house brand works really well so i gave it a try im happy with the outcome used the buffer in the same fashion as the finish compound for application only i buffed by hand with terry cloth towels and thats about it hope this helps

Pages: [1] 2 3 ... 5

Null

SMFPacks CMS 1.0.3 © 2023