Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - redpanda2765

Pages: [1] 2 3
1
Gelcoat / Paint / Fireberglass Repair / Re: Boat covers
« on: September 19, 2022, 04:56:15 PM »
Depends on how much you?re looking to spend. Are you looking for a nice tow cover or just something to throw over it while stored? If you do a search, there was a guy a lot of people used, I think he worked out if his house. I?ll take a look later and see if I can find the info. Most marine upholstery places will make custom covers.

If you want just a decent cheap one, Overtons online store is a good place to check out.
Well I?m not looking to spend a fortune but I want to get a good quality one and possibly looking to tow with it


Sent from my iPhone using SoCal Jet Boats

2
Gelcoat / Paint / Fireberglass Repair / Boat covers
« on: September 19, 2022, 02:43:31 PM »
I need to get a new boat cover I?ve noticed my current cover getting beat up over the years and want to get a good quality one. Any recommendations? Thanks in advance


Sent from my iPhone using SoCal Jet Boats

3
The No Wake Zone / Re: 10 fwy sand bar
« on: July 14, 2022, 12:56:53 PM »
Really looking forward to the event next weekend? roll call whos goin


Sent from my iPhone using SoCal Jet Boats
I?ll be there


Sent from my iPhone using SoCal Jet Boats

4
I?ll be at the Big River RV park, not sure time wise, i?ll let you know once i see him.


Sent from my iPhone using SoCal Jet Boats mobile app
Cool sounds good!


Sent from my iPhone using SoCal Jet Boats

5
I honestly don?t know the lower river that well, i do have a buddy that does so i?m hoping he can guide me threw it.


Sent from my iPhone using SoCal Jet Boats mobile app
What time are you and your buddy planning on launching and where kind of I tag along?


Sent from my iPhone using SoCal Jet Boats

6
Have a safe trip out, see you out there. I got Grandpa?s boat ready to go


Sent from my iPhone using SoCal Jet Boats mobile app
What time are you launching trying to find someone I can follow not to familiar with that part of the river!


Sent from my iPhone using SoCal Jet Boats

7
Miscellaneous / Spam / Re: BBC header coating
« on: January 25, 2022, 11:01:49 AM »
If you just want to use the the wet headers you have now, you could just put plugs in the I water injection bungs. If you do that, you might want to put some hi temp anti-seize on the plugs. It?ll make it easier to take them out if you decide to go back to wet headers.

Ceramic coating is what you want to handle the heat. They have a silver/aluminum look, nothing really like chrome. They also have other colors like black white and copper. Eventually, they will dull a bit do to the heat. Nothing is going to stay perfect on exhaust.

Embee Performance coatings is right off the 55 around Dyer.

There is also Young Gun coatings in Rancho Cucamunga.


Sent from my iPhone using SoCal Jet Boats mobile app
Awesome thank you I will give those guys a look


Sent from my iPhone using SoCal Jet Boats mobile app

8
Miscellaneous / Spam / Re: BBC header coating
« on: January 25, 2022, 09:13:04 AM »
Also does any one have a set they are willing to part with? And or know anybody that does good powder coating for headers?


Sent from my iPhone using SoCal Jet Boats mobile app

9
Miscellaneous / Spam / BBC header coating
« on: January 25, 2022, 08:33:45 AM »
Mi got a quick question and need some advice! I have a set of wet bassetts right now and next year I want to go to a dry set up I already have a water line that goes thru the motor so I know I?m good there but I don?t know if I should just keep my headers now which do have a little rust and either powder coat them with classic polish? Or get another set and either re chrome them or powder coat them to a chrome look a like? Since I am going dry headers I don?t want to pipes to turn blue or any other color so I am wondering if I should powder coat them in a chrome look a like?


Sent from my iPhone using SoCal Jet Boats mobile app

10
Jet Pumps / Re: Droop snoot bolts question
« on: December 18, 2021, 04:18:24 AM »
Loctite 242 blue


Sent from my iPhone using SoCal Jet Boats
Awesome thank you


Sent from my iPhone using SoCal Jet Boats mobile app

11
Jet Pumps / Droop snoot bolts question
« on: December 17, 2021, 04:49:43 PM »
Did any of you who bolted on your droop snoot add loctite? If so what kind?


Sent from my iPhone using SoCal Jet Boats mobile app

12
Events / Re: SoCal Jet Boats 'One Hot Summer Weekend' August 21st, 2021
« on: August 21, 2021, 09:19:11 AM »
We finally got here it the water is super low? Is the event still going on or where is everyone launching?


Sent from my iPhone using SoCal Jet Boats

13
Events / Re: SoCal Jet Boats 'One Hot Summer Weekend' August 21st, 2021
« on: August 17, 2021, 02:28:17 PM »
Will be out there All day Saturday with my boat and a buddy’s boat


Sent from my iPhone using SoCal Jet Boats

14
Where is everyone launching Saturday?


Sent from my iPhone using SoCal Jet Boats

15
I will be there!


Sent from my iPhone using SoCal Jet Boats

16
Lower River / Re: Memorial weekend!!!!!
« on: May 17, 2021, 12:55:48 PM »
What’s everyone’s plans for memorial weekend anyone taking out the ole floats?? I’m gunna be in Blythe with my lady!!!


Sent from my iPhone using SoCal Jet Boats mobile app




Sent from my iPhone using SoCal Jet Boats mobile app

17
Lower River / Memorial weekend!!!!!
« on: May 17, 2021, 12:54:43 PM »
What’s everyone’s plans for memorial weekend anyone taking out the ole floats?? I’m gunna be in Blythe with my lady!!!


Sent from my iPhone using SoCal Jet Boats mobile app

18
Lower River / Parker trip
« on: April 28, 2021, 05:14:08 PM »
Me and a buddy of mind will be in Parker mid next week 4-7th is anyone gunna be there before the mother’s day event????


Sent from my iPhone using SoCal Jet Boats mobile app

19
Lower River / Parker river trip
« on: April 08, 2021, 11:28:04 AM »
Is anyone going to be on the water in Parker from May4-7th. If so let me know would love to link up with some of y’all and cruise. Just look for the 72 yellow and brown Kona and the 77 blue and white charger


Sent from my iPhone using SoCal Jet Boats mobile app

20
Events / Re: 2021 Summer Tour Kickoff Event Picture Thread
« on: March 15, 2021, 01:59:28 PM »
Last 10
Hell yeah rad pics. When’s the next event?


Sent from my iPhone using SoCal Jet Boats mobile app

21
Jet Pumps / Re: Need some of your opinions
« on: March 06, 2021, 09:52:07 PM »
Despite what the others are saying the droop will give you a taller roost. It has a different pin angle than the stock nozzle adapter. Not sure what it is off the top of my head.

The first two pics are the roost from my Advantage with a droop (and 600hp).

The PD droop/ride plate setup should work pretty decent on your boat. If you don't like it after all there are several people on the hunt for that setup so you'll be able to sell it.

Last pic is my buddy's LS powered Bahner. It likes the droop and ride plate.

Sent from my Pixel 3 XL using SoCal Jet Boats mobile app
Very nice. Thanks for the input I was looking at adding a Berkley 8 degree wedge but I’m worried I’m going to loose my ability to get on plain as fast as I do now with a 4 degree wedge


Sent from my iPhone using SoCal Jet Boats mobile app

22
Jet Pumps / Re: Need some of your opinions
« on: March 03, 2021, 05:01:22 PM »
Thanks for the reply’s I think I’m going to hold off on the droop and ride plate for a set up I’ve been dreaming about later on down the line.


Sent from my iPhone using SoCal Jet Boats

23
Jet Pumps / Re: Need some of your opinions
« on: March 02, 2021, 08:50:00 PM »
Use the search option to read about droop and ride plates. Its been covered multiple times.
By adding a droop and ride plate what are you trying to achieve?


Sent from my iPhone using SoCal Jet Boats
I’m just trying to get on plain faster and throw a higher roost. I have a manual place diverter already



Sent from my iPhone using SoCal Jet Boats mobile app

24
Jet Pumps / Need some of your opinions
« on: March 02, 2021, 12:40:39 PM »
I want to get this droop snoot and ride plate assembly. But I dont know if it would work with my pump. And also would it be worth it to even get it or is it just a waste of money here is a picture of the my pump currently and what I’m thinking about getting? Thanks in advance.


Sent from my iPhone using SoCal Jet Boats mobile app

25
Lower River / Re: First trip of Year
« on: February 21, 2021, 10:37:10 AM »
Yeah man that would be coo bro I’ll be in touch with you as we approach hotter days . I’ll have to bring the seltzer’s the wife and I are on keto lmao


Sent from my iPhone using SoCal Jet Boats
Sounds like a plan man. All good alcohol is alcohol


Sent from my iPhone using SoCal Jet Boats mobile app

Pages: [1] 2 3

Null

SMFPacks CMS 1.0.3 © 2026