Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - monster

Pages: [1]
1
Boat Showcase / Re: been lurking for a bit....
« on: August 12, 2009, 03:04:01 pm »
Tom,
You can count on seeing me soon, there are parts I need and I always have a few questions ;D ;D

2
The No Wake Zone / Re: This is a killer pic
« on: August 11, 2009, 04:26:17 pm »
thats an absolutely sick pic!  :o :o :o :o

Reid

X2 >:D >:D

3
Engine Mechanical / Electrical / Re: dual carb fuel????
« on: August 10, 2009, 04:36:18 pm »
The fuel pump is a Holley blue electric. pressure is set at 8psi which by reading info on the Holley web site is too high they it should be at 6psi. I just order the rebuild kits today. I'm gonna try blocking off the second port, lowering the fuel pressure down to six (I think the pressure was holding the needle valves wide open)... I'm very stumped about the bogging at WOT, its only the last 10-15% of throttle it bogs like its flooding, i know its running real rich the plugs are black and the pipes have a lot of black soot. Don't have a clue as to it idling good and it runs like a bat outta hell till it hits WOT then it bogs out and I have to back out of it.... Gps at 66mph rite before the bog :banghead: :banghead: 

4
Engine Mechanical / Electrical / dual carb fuel????
« on: August 10, 2009, 03:28:43 pm »
Ok so I've been having issues with the bbc 454 running toooo rich, couldn't get the floats to set right, lots of carbon build up. Then today I'm looking on line for rebuild kits to give the carbs a fresh start ;D, and I noticed something very different about my Holley 1850 600cfm carbs--- they have two fuel inlets, so I keep looking on line and everyone else is running them with single inlets..... My question is has anyone seen this before??? and might this be causing my high rpm bogging???? feels like the motor is flooding at WOT... here's some pix... go back to single inlet and a fresh rebuild kit or????

5
Boat Showcase / Re: been lurking for a bit....
« on: August 10, 2009, 01:51:17 pm »
We were able to GPS the boat yesterday and it hit 66mph before it started bogging. Not to bad considering the carbs keep flooding ( reason for the bogging) at WOT (rebuilding this week) and no place diverter... its coming this winter or whenever I find a good deal. State worker on furloughs gotta save every penny :'(

6
Engine Mechanical / Electrical / Re: fuel tank pick up????
« on: August 10, 2009, 01:46:41 pm »
well after looking it it as a whole, there isn't that much glass to cut out and i have extra mat sitting around so I'll be pulling the tanks this week, while I'm rebuilding the carbs :mad: :mad:.

7
Central Valley / Re: mendota.....
« on: August 09, 2009, 08:16:29 pm »
i hate wiring myself :banghead:.... hope you can get out there one of these weekends ... our boat will be down for a couple of weeks, carb issues, gonna rebuild both of them (floats are bad= dumping fuel at the top end and running supper rich) and gotta pull one of the tanks and replace the pickup tube.

8
Central Valley / Re: mendota.....
« on: August 09, 2009, 05:54:31 pm »
couple of pics........

9
Central Valley / Re: mendota.....
« on: August 09, 2009, 05:53:21 pm »
it was a good turn out today about 13 boats most of the day

10
Engine Mechanical / Electrical / fuel tank pick up????
« on: August 06, 2009, 06:10:38 pm »
 :banghead: :banghead:  OK here is my problem. 76' Tahiti has twin aluminum gas tanks. I can only  get fuel to come out of one tank ??? removed the shut off valve and and blew thur the line, no clog the strange thing is the tank is almost full and i couldn't here any bubbles just a the air going thur. I tried the other tank which is almost empty and i could hear bubbles :screwy: has any one ever heard of a pickup tube breaking off in the tank or should I grab a helmet and wait for the short bus...... Damn I don't really want to take the tank out its glassed in at the ends :(

11
Central Valley / Re: mendota.....
« on: August 05, 2009, 03:59:47 am »
We're gonna try and make it sunday if I can get the oil pressure and fuel gauges to work. I'll be working on the boat Saturday so we'll see......

12
Central Valley / Re: mendota.....
« on: August 04, 2009, 04:59:59 pm »
Hey bigmike. No website for mendota other than the fishing stuff. Its a small place over all perfect for jets and flat bottoms. Good local following. slow weekend might see 5 boats good weekend 20-25 boats, there is a good sand bar about waist deep where everyone hangs out. good thread here....

http://www.performanceboats.com/html/forums/showthread.php?t=40536

13
Central Valley / Re: mendota.....
« on: August 02, 2009, 04:54:34 pm »
that ramp is crazy slick, both the wife and I slid about 5 feet before we were able to grab the boat and stop our self from eating sh*t :o :o...... it would be good to see ya out there. This is the closest water to us so it will be a regular place for us.....

14
Boat Showcase / Re: newbie to the sight
« on: August 02, 2009, 03:44:59 pm »
Sweet looking dingy there! KILLER roost!

Welcome!

Ray


X2

love that shot of it runnin.... ;D

15
Boat Showcase / Re: Hello everyone, newbie to boats
« on: August 02, 2009, 03:41:49 pm »
welcome and post some pics..... ;D ;D ;D

16
Central Valley / mendota.....
« on: August 02, 2009, 03:39:42 pm »
We had a good first trip out in the new boat, also first time in the slough which was super nice. Good place for jets and flats (hot rod type boats). Met some real good people out there. Only 4-5 boats on the water so it was super flat all day.......... found a few small issues with the boat that need to be worked out like the crap ass wiring  :banghead: and fuel pressure  but nothing too big....

here's a few pix


17
Central Valley / Re: this weekend...
« on: August 01, 2009, 03:25:29 pm »
I think we're gonna hit kaweah also.. We'll be out in the morning. Hope the water levels is good..

18
Boat Showcase / Re: been lurking for a bit....
« on: August 01, 2009, 03:22:50 pm »
We'll be out on Kaweah in the morning, if any ones gonna be out there stop us and say hi!!

19
Boat Showcase / Re: been lurking for a bit....
« on: July 30, 2009, 07:36:47 pm »
And just picked this boat up off craigslist. first boat with a berk pump. Was into boat in my teens and 20's then family came along and you know the rest. Last boat was a Ranger w/460 and a panther pump....

20
Central Valley / this weekend...
« on: July 30, 2009, 07:22:27 pm »
anyone hitting the water this weekend???? bv, kings river, naci or others.....

21
Boat Showcase / been lurking for a bit....
« on: July 30, 2009, 07:20:53 pm »
Well I've been on this site for a little while and decided to post an intro finally. Name is Stephen married with a son whos 9. Boat is a 1976 Tahiti bbc 454 tunnel ram w/ twin 660 holleys, 12jca (waiting for a place diverter ;D) and so on.... Here in the boring part of the central valley--- Coalinga ;). Looking for family type people to hit the water with.....

Pages: [1]

Null

SMFPacks CMS 1.0.3 © 2022