1
The No Wake Zone / Re: Happy Birthday Tom JBP
« on: December 05, 2009, 12:23:10 PM »
Happy B-day!
may your boat ride true and your dock be loaded with women
Rebel
may your boat ride true and your dock be loaded with women
Rebel
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Boat Showcase / Re: another new guy
« on: September 06, 2009, 02:41:35 AM »
Welcome to the site...
and have fun with your new project!
no way to know for sure, but best guess, early 70's
Rebel
and have fun with your new project!
no way to know for sure, but best guess, early 70's
Rebel
3
Projects / Re: Here's my 78 Brendella
« on: August 10, 2009, 10:44:32 AM »
Sounds like someone is getting a feel for the need for speed 
Looking real good !!! now if I can get time to work on getting mine wet this year
rebel
Looking real good !!! now if I can get time to work on getting mine wet this year
rebel
4
Trailers / Re: Floater Bar vs Winch
« on: July 30, 2009, 04:55:40 PM »
I've used a winch with the big ass 24ft deep v-hull (fishing boat) and love that it would pull the heavy ass boat up on to the trailer if I was not backed into the water enough. and made it easy to center boat. but with the light weight of my sleekcraft rebel I love the bar, one man load and float... trailer is low in water so boat is always floating before I unload or load, the bar pulls her straight on trailer when I pull out of the water, too easy if you ask me. Personal choice
Rebel
Rebel
5
Projects / Re: Here's my 78 Brendella
« on: July 30, 2009, 04:41:00 PM »
To Droop or not to Droop? that is always the question... I think it would look sooooo sweet with a rooster tale!
Rebel
6
Projects / Re: redo a floor
« on: July 30, 2009, 04:37:04 PM »rebel im glad you have such a good since of humor, if that was to happend to me i dont know what i would do.....oh yeah i do collect the insurance and runnnnnnnnn...
I have no funny bone
but IRrebel does The boat looks great
Rebel
7
Jet Pumps / Re: Bassett T valve...
« on: June 18, 2009, 05:35:52 PM »Get rid of it and put a ball valve in line with it by your seat...you dont need that junkI ball valve it too... works fine and much cheaper, lol
Rebel
8
Jet Pumps / Re: which Jucczzi is tghe better of 2 evils?
« on: June 18, 2009, 05:11:15 PM »
your best with the WJ and a little added goodies from Tom at JBP
Rebel
Rebel
9
Boat Showcase / Re: Lets See Your Rides
« on: June 18, 2009, 04:08:30 PM »Thanks. What do you guys thing about the scoop I just got it on today?Looks perfect, just what I want to add to mine... where and how much?
Rebel
p.s. nice boat!
10
Engines / Engine Parts For Sale / Re: BBC tunnel ram
« on: August 02, 2008, 11:13:00 PM »
But it looks so SHINY... why would you not use it
Rebel
Rebel
11
Projects / Re: Here's my 78 Brendella
« on: June 21, 2008, 04:29:31 PM »I think I would paint eyes on the butterflies.
I can't help but laugh... thats too funny!
Great work John... she's going to turn alot of heads
Rebel
12
Gelcoat / Paint / Fireberglass Repair / Re: I painted HDriderTH's boat today
« on: June 02, 2008, 11:51:29 PM »
That paint job really looks killer, sets the boat off very nice, specially with the Blower .
You have yourself one nice looking boat your building Keep up the labour of love, yours is turning out (as my new step daughter
would say) Frigin Sweet!
Rebel
.You have yourself one nice looking boat your building
Keep up the labour of love, yours is turning out (as my new step daughterwould say) Frigin Sweet!
Rebel
13
Projects / Re: How can I tell which type of jacuzzi jet I have?
« on: June 02, 2008, 02:36:29 PM »
looks like someone made a addaptor plate from a Berk intake to a Jacuzzi pump.
If this setup works a Berkley intake loader should work... or rework the pump and put an inducer on the impellor shaft to load the pump.
Sure Josh @JBP would help you out with either.
Welcome to the weird and wounderful stuff done with jets
Rebel
If this setup works a Berkley intake loader should work... or rework the pump and put an inducer on the impellor shaft to load the pump.
Sure Josh @JBP would help you out with either.
Welcome to the weird and wounderful stuff done with jets
Rebel
14
Interior / Re: Boat Covers
« on: May 30, 2008, 08:05:29 PM »
What ever happened to 'made in USA'?... not china?
Oh wait... make that 'made in Canada' best quality...
waits for rebutles
Rebel
Oh wait... make that 'made in Canada'
best quality...waits for rebutles
Rebel
15
Interior / Re: Carpet
« on: May 30, 2008, 08:00:17 PM »
On that same web site there is instulation tips... just follow the links
the information is right in front of our eyes some times, lol
http://www.boatcarpetbuys.com/Customer_Service.asp
the information is right in front of our eyes some times, lol
http://www.boatcarpetbuys.com/Customer_Service.asp
16
Gelcoat / Paint / Fireberglass Repair / Re: Gelcoat Answer
« on: April 27, 2008, 10:35:02 PM »
Well the price dictates that it's pro stuff at that price
Sure it will flex well enough to keep it looking good for years of lake/river use... I more like to always hear how they
perform under hot Arizona sun that way I know it will last a life time up here, lol.. 
So do you have a color scheme picked out for this boat's new paint job... huh, huh, huh...
Good luck with your project, sounds like you'll have a beautiful new boat soon
-Rebel
Sure it will flex well enough to keep it looking good for years of lake/river use... I more like to always hear how they
perform under hot Arizona sun
that way I know it will last a life time up here, lol.. So do you have a color scheme picked out for this boat's new paint job... huh, huh, huh...
Good luck with your project, sounds like you'll have a beautiful new boat soon
-Rebel
17
Projects / Re: glasscutters Jet
« on: April 14, 2008, 05:41:33 PM »
The light bulbs appear to be silicone, little extra that squirted out
and don't be scared, your in good hands Think there's a flapper missing on the exhaust too
-Rebel
18
Gelcoat / Paint / Fireberglass Repair / Re: Gelcoat Answer
« on: April 13, 2008, 11:15:48 AM »
Looking forward to the feedback...
but if the products they sell are that good...
they will be bought out soon by Dupont/basf/ppg...
-Rebel
but if the products they sell are that good...
they will be bought out soon by Dupont/basf/ppg...
-Rebel
19
Gelcoat / Paint / Fireberglass Repair / Re: can you paint over gel coat ?
« on: April 13, 2008, 11:06:10 AM »
Got yourself a fine looking boat now
just remember you can only cut polish (clean) the paint so many times before it becomes thinner, before you see
color layer underneath show through. keep it covered and out of the sun to keep it looking new, longer
and welcome to the site
-Rebel
just remember you can only cut polish (clean) the paint so many times before it becomes thinner, before you see
color layer underneath show through. keep it covered and out of the sun to keep it looking new, longer
and welcome to the site
-Rebel
20
Projects / Re: glasscutters Jet
« on: April 08, 2008, 12:33:59 PM »So, I'm pulling the Glasscutters 23.5' boat home the other night, when up ahead I see an intersection and a YELLOW light. I think hmm, do I blow the light or try and stop. To my right I see a cop, hmm, better stop. BUT, the big boat doesn't want to and pushes me 1/2 way into the intersection. I looked up and wave to the cop, he shock his head, waved back and drove off.I thought you used the King Ranch truck to tow
not the 4cyl miata ... glad it wasn't me Quote
So, here's the beginning of the pump internals, wear ring was previously mis-installed and looks like a little "rock turned lathe action" between the impeller and the suction. Made this a new ventilated impeller.
What pump is it? and what tricks you got up your sleeve?
-Rebel
21
The No Wake Zone / Re: Need a boating buddy????
« on: April 08, 2008, 12:05:27 PM »hahaha I need to become a paid buddy! Im freaken broke!
The only fishing buddy I need looks like thi s
-Rebel
22
The No Wake Zone / Re: TO ALL HIGH PERFORMANCE MARINE ENGINE BUILDERS....
« on: April 08, 2008, 11:06:38 AM »I'll be there I'm bringin a 30 pack and a lawn chair !
Think thats enough?
going to be a long day -Rebel
23
Gelcoat / Paint / Fireberglass Repair / Re: ok, probably a dumb question, but...
« on: April 08, 2008, 10:29:28 AM »Can you rattle can over fiberglass and resin(dry).....just a thought I am having
Yes
Yes. Sand it first.
Just remember to wipe up the sand dust and keep your hands off the area your going to paint (latex gloves work
) yourhands have oils and oil keeps paint from sticking... though in a engine compartment... no worries
-Rebel
24
Gelcoat / Paint / Fireberglass Repair / Re: Wet Sanded
« on: April 08, 2008, 10:04:08 AM »
Looking good so far... but just a small tip...
The idea behind wet sanding is to run water as you sand... 'just a little' to flush away the paint (paper lasts longer)
But all in all... dipping the sandpaper or splashing the boat will work too
She's going to look real good...
-Rebel
The idea behind wet sanding is to run water as you sand... 'just a little' to flush away the paint (paper lasts longer)
But all in all... dipping the sandpaper or splashing the boat will work too
She's going to look real good...
-Rebel
25
Gelcoat / Paint / Fireberglass Repair / Re: what is used to paint a pump?
« on: April 08, 2008, 09:59:09 AM »
I would not sand blast aluminum! too easy to make peeks and valleys in the aluminum that will oxidize later on and make it
look worse faster, plus you will need to sand to make it smooth again. Best is paint striper if your going to remove the paint...
spray on, scrape off... toxic stuff so delute it if your going to flush it down the drain LOTS!... fish die easy from that stuff
(humans too) anyways... if you sand, remember one thing. Aluminum contains oils in the metal... you need to clean it with
Methyl hydrate before you apply primer. A zink rich primer is best... or an etching primer for aluminum. Then top coat with paint,
I would use a durable paint (urethane), but if you don't have spray equipment, your left to a rattle can
should still look good.
-Rebel
too easy to make peeks and valleys in the aluminum that will oxidize later on and make itlook worse faster, plus you will need to sand to make it smooth again. Best is paint striper if your going to remove the paint...
spray on, scrape off... toxic stuff so delute it if your going to flush it down the drain
LOTS!... fish die easy from that stuff (humans too
) anyways... if you sand, remember one thing. Aluminum contains oils in the metal... you need to clean it with Methyl hydrate before you apply primer. A zink rich primer is best... or an etching primer for aluminum. Then top coat with paint,
I would use a durable paint (urethane), but if you don't have spray equipment, your left to a rattle can
should still look good.-Rebel
