I am selling my Place diverter adapter that will allow you to run pretty much any kind of place diverter with your Jacuzzi WJ pump. The adapter bolts to the 4 bolt flange where the stock nozzle goes on a WJ pump, and just by removing the pins on a place diverter and installing this assembly, you can use a place divereter on your Jacuzzi pump. This will really come in handy if you are having trouble finding a diverter made specificially for a jacuzzi pump or if you have a berk, american turbine, agressor diverter laying around.
I am asking $100.00 for it as I paid about 150 for it last year. Any questions or comments feel free to hit me up.
(909) 223-4333.
Andy

PS I will post pics when I get home tonight.

Hey guys,

Im seeling my jacuzzi WJ jet assembly from my boat, this includes the pump, bown, intake, and loader. Everything is in good shape except for the impeller and wear ring. The impeller could be repaired and recut but if you have a spare itdd be best to replace it. i removed it from the boat as I am going with a berk setup. The loader is a ski type loader, and not just a rock grate so its a step up if you just have a rock grate. Im asking $200.00 OBO for everything.

Hit me up if you have any qyestions.
Andy (909) 223-4333

Hey guys,

I have a set of hardin logs and snails for a BBF. They are in good shape, and will polish up nicely. I'm asking $70.00 OBO

Hey guys, I finally got off my ass and decided to go thru my boat stuff, and I have quite a bit of stuff for sale. All stuff is OBO, so make me an offer. :-)
Andy



BBF rear mounting plate $40.00.
This mounting plate bolts down to 2 of the bolts that holt the jet to the intake. It was used on a 700HP plus bbf, so I know it holds up to power.



1350 PTO for BBF. $40.00.




Dash/ switch panel assembly, new in package $50.00







Continued In random boat parts.......

Hey guys,

Im looking for a new or used MSD probillet distributor for a big block chevy. I have an external coil that id like to use and right now I have an MSD HEI setup but I want to use my external coil. Let me know.

Andy

Hey guys quick question,

On A BBC at what PSI is the internal oil pressure relief supossed to start blowing off pressure? When I ran my engine the other day with 15w40 and 2 qts of 60 weight in it to break it in I was getting about 90 psi at idle and when i brought the rpm's up it would peg the gauge. I'm 99 percent that the gauge and sender are good becauswe they worked not too long ago when my friends engine was in the boat. Im going to change the oil and filter tomorrow and see what happens but if its too high still I may need to see if there is debris stuck in the relief passage or if its even servicable.  Any help and info would be much appreciated.

Andy

Hey guys,

Does anybody have a broken up set of MSD red 8mm spark plug wires? I got my boat running today, (pics and vid to come) and I ended up burning the crap out of one of the wires. I just need the one wire to make the set complete again.

Anyone got one lol.

BTW its the one that goes from the dizzy on my BBC to the #8 plug. (its going all the way from the dizzy to the front drivers side cylinder)

Andy

Hey guys,

Im looking for a 1310 style U joint that can be seperated in order to run the engine off the hose. I have one right now but I dont trust it, and its cant be seperated. Does anyone have one in good shape theyd be willing to part with?


Andy

hey guys quick question,

When you use a dooley 10 gt marine pan you can use the stock pickup right, and still have proper clearance. I hope so, lol because when i stuck the pan on yesterday i had a weird feeling that there may not be the needed clearance between the pickup and the bottom of the pan.

hey guys,

I need a holley 850 double pumper with mechanical secondaries and manual choke. I have a 750 single pumper with elec choke and vacuum secondaries but Im being told that it wont be enough for my build. Does anyone have one for sale.

Im selling a set of BBF logs and snails. They are in good working order, a lil dirty, but they work just fine. They are being sold with the water fittings also. I'm selling them for $150.00 OBO, so make me an offer :-)

Heres my mini garage sale.

$150.00  Set Of BBC  Chevy heads. I took them off of my engine in running condition, I know they are ugly and brown, but they work. The numbers on both of them are 346236.






$50.00 Stock 454 intake manifold. Yea I know lol Its ugly and dirty but it works. Ill also include the adapter from edelbrock to stock flange thats on there.



$50.00 Mallory electronic distributor and accel coil. I took both off of the boat before I pulled the engine out and they both work.



$150.00 Set of BBC INDMAR logs and snails. They are both in good working shape with no cracks or major dings. They are a lil bit dirty tho lol. The previous owner of my boat didn't think much about cleanliness.




All prices are negociable lol so let me know :-)

Heres a pic of the rear motor mount from my friends 73 kona. It has a BBF in it and I have never seen this type of rear engine mount before. it has the 2 feet that stick out and go right over the 2 front mounting holes for the jet and theres a 1/2 inch bolt that goes thru the mount, thru the jet and thru the bottom of the boat and it has washers and a nut under the boat. Any Ideas? it looks VERY strong and my friends BBF pushes upwards of 800HP and it hasnt given him any probs.