Trimetric stringer mount pedal with nice black anno. -$180

Hallcraft pedal only. -$25

Berkeley nozzle with fresh black powder coat. -$60


Ride plate and cradle with black powder coat. -$50

Optima battery tray purple. $40

10 gallon spun aluminum fuel tank in great shape. -$70

Fuel filter mount. -$25

Jegs scoop tray, single carb 4150. -$60


Call or txt Ryan 7609644235


Sent from my iPhone using SoCal Jet Boats

Nice fridge for the garage.
Everything works as it should, we just have 2 other fridges and don't need 3.
75 bucks.
Located in apple valley.


Sent from my iPhone using SoCal Jet Boats

97 Yamaha Waveblaster
Custom paint
No Trailer
Brand new battery
Just took it out this weekend for memorial and it ran good.
Currently located in needles, ca but could bring to I/E or high desert for serious buyer with deposit
$2200 obo

Complete 088 bbc rectangle port heads.
They've been sitting and need to be gone through.
550 Obo


Sent from my iPhone using SoCal Jet Boats

Pops and I drove up to Oregon and back in 25 hours to get this thing yesterday.
So here it is-
1978 Nordic Tunnel
Appears to be a light layup
Has a rounded keel and intake is machined for a shoe
Intake is setback
Balsa wood floors
HTP polished rail kit
20" wide fiberglass buckets
Has some calgo steering parts
Gel coat is in really great shape especially for being almost 40 years old.
Custom built low profile trailer with all new LED lights and brand new torque thrust 2 wheels and brand new tires.



Sent from my iPhone using SoCal Jet Boats

My buddy has a 21ft eliminator daytona with a blown 482 bbc that has dual holley 750s. He ran it labor day weekend and it ran perfect. The next time he took it out it ran fine at idle and on the trailer, but as soon as it got on plane it craps out and dies. It will fire right back up and as soon as you get on plane, same thing again. He replaced a bunch of ignition stuff, plugs wires, msd box, cap and rotor, and the battery thinking it was that, but it still does it. Hes not computer savvy and I told him I would see if any of the experts wanted to chime in or if anyone has had this problem before. Thanks Fellas.

Hey guys, need to get rid of a few things im not going to use.

Rewarder BBC OT short collector headers w vacuum evac, they still have some pretty good shine to them and not alot of rust. Just kinda messed up near the weep holes. i got them with another project so im not sure how they got like that. But if you just need some cheap headers these are for you cause when they are mounted you probably wont even see it. - SOLD

Nicson bell housing with feet for BBC in pretty good shape. - SOLD 

Glenwood stringer mount pedal, does not come with cable, could use a good polish, and needs one of the bolts that mounts it to the stringer but all the hardware and spring for the pedal is there. -asking 40obo

Parts are in apple valley, ca but i also travel through the IE frequently and im also near stateline and Needles on a weekly basis. Besides that all items are plus shipping.

thanks, ryan

2002 Hoyt Ultratec Bow with 55lbs XT2000 limbs. Spot hogg hogg-it hunter 5 pin sight, QAD Ultrarest HDX, Spot Hogg The wiseguy release, 3 brand new Rage Broadheads, Torsion quick release Quiver, 6 Gold tip arrows like new, and 2 misc arrows. I also have a barely used red head 4 sided target.
Its for sale for 550 or also looking to trade for BBC parts.
Thanks, Ryan

I was just wondering the benefits/diferences/purpose of a say mallory supermag vs your typical distributer?

1977 Charger for sale less motor. Its a full stringer boat, It just looks like it has taller 6" stringers and they drop down to 4" and run the rest of the length. I was told this particular bottom is a splash off of a Liberty and can run pretty good. Has a berkeley "E" pump with ride plate. Its set up for a BBC and comes with a 3 point mount with top mount starter. The mounts are still bolted to the stringers so all you would have to do is bolt up the bell housing and the other hardware to your BBC and drop it in. All of the wiring and plumbing is there. It has 2 aluminum saddle tanks that look like they are pretty good size. The interior is in good shape and the seats have no tears or anything. Has a floor mount pedal, it could use a throttle cable but the one in it still works. It has a steering rack and the cables look like they are in good shape. The trailer could use some work around the fenders and steps and could probably use some bunks or just clean up the ones that are there. One of the tires came apart so it has a spare on it now, I have the matching wheel its just missing the hub cap and needs a tire... Overall its a pretty clean boat and you need is a motor. The deck and all the glass is really solid and in good shape.
Im asking $1800 obo
Thanks for looking and if your interested give ryan a call at 760 nine six four 4235

Hey guys! im new to the site but ive been looking around it for the past few months and checking out the videos. i just picked up my first boat and am excited to have a project. its an 82 eliminator sprint less motor and seems to be in decent shape. it has a berkeley jg pump (split bowl i believe) that is set back 3 1/2" and just the standard nozzle, it also came with a semi pro open center loader. id like to pick up a droop snoot and hydraulic place diverter for it. the pump is complete parts wise but not together so any advice on where i can get the pump put back together or who can show me because i have no experience with them and want it done right. the hull is in ok shape, theres a couple stress cracks on the bow and it could definitely use a good buff but im thinking about having a buddy of mine paint it and help me freshen up the supports and little fiberglass stuff inside. i got some parts with the boat like motor mounts for a bbc, an alternator, starter, rewarder headers, gas pedal and a few other misc parts. as far as a motor goes i think im going to find a 2-3k dollar donor boat with a complete 454 or bigger and using what ever i can from it and sell whats left over. i just got the boat about a week ago so first on the agenda is getting the pump back together and the hole around the pump taken care of, the guy i got it from had some 1/4" aluminum he cut out for it but it will block off the clean out and im not sure if thats a good idea or not. any advice, tips constructive criticism or help would be greatly appreciated. my goal is to have it ready for next summer and get it on the river and meet some of you guys!
                                                                                                                           Thanks Ryan







[ Guests cannot view attachments ]
[ Guests cannot view attachments ]