Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - H20Nut21Bahner

Pages: [1] 2 3
1
Random Boat Parts For Sale / Bilge vents
« on: February 19, 2018, 07:43:24 PM »
Looking for a pair of blue flush mounted bilge vents. I know CP and Eddie marine have them, figured I'd check here first

Sent from my LG-H910 using SoCal Jet Boats mobile app


2
Jet Pumps / Pump packing
« on: January 29, 2017, 08:27:00 PM »
I need to replace the packing rings in my pump. Is it recommended to use the factory style strips, or would the graphite type rope packing work?
Haven't found much in the way of a spec. on it, is it 1/4, 5/16?

Sent from my SAMSUNG-SM-G870A using SoCal Jet Boats mobile app


3
Engines / Engine Parts For Sale / 396 pistons
« on: December 19, 2016, 05:51:57 PM »
I'm sure I'll get some crap for this. Trying to see how cheap I can throw a budget runner back together for another project.
Anyone have decent a set of .060 over pistons?
(4.155 bore)

4
Engine Mechanical / Electrical / BBC head question
« on: December 13, 2016, 11:20:52 AM »
Hey guys, I'm trying to figure out if the set of heads I have are worth having done. Not looking for anything spectacular, maybe a mild budget build.
The casting number is 3993820, which shows to be from 71-74 chevelle/camaro? The little bit of info I have found his far, shows that they're just about the same as the 781 and 049 heads.
Any truth to that?
Would these be worth having them done?
Any insight is appreciated

5
Engines / Engine Parts For Sale / BBC rail kit plates
« on: December 09, 2016, 11:47:32 PM »
Front and rear plates out of an Eliminator Daytona. Water inlets are incorporated into front plates. Front and rear plates only. No rails or feet.
Pick up in Redlands Ca. Shipping could be arranged on buyers dime.

$125

6
Engines / Engine Parts For Sale / For the Ford guys ...
« on: September 19, 2016, 10:57:48 PM »
Came across this on Facebook, figured I'd pass it along

7
Engines / Engine Parts For Sale / Buyer beware!!
« on: July 28, 2016, 10:59:57 PM »
In a way, I hate to do this because I'm not the type of person to badmouth people or do bad business. I'm only posting this in hopes of saving someone else the headache. Also, I know there are some people onnthese different sites who are friends with the person, but I really don't care.
I had an 850 Speed Demon carb, JAMES BURKHART had an IMI top mount starter and was looking for a carburetor. Ended up meeting up with him at the Oak Hill offramp above Cajon Pass and trading.
Most of you don't know me, some do. The IMI starter is basically idiot proof to wire(hot lead and key). Needless to say, starter was bad, dragging real hard(not binding/grinding) and would engage intermittently. I pulled the starter back out and messaged James Saturday. He said he would either find me another starter or give me cash. That statement, and messages being ignored until yesterday(Weds) lead me to believe he new it was no good. His last message yesterday basically said give him $85 for his time, plus the cost of the carb kit. I have no issue with the cost of the kit.
I'm only posting this so no one else gets burned!
Lesson learned, don't trade electrical parts.
BUYER BEWARE!!

8
Engines / Engine Parts For Sale / BBC parts needed
« on: July 22, 2016, 09:57:55 PM »
Alright guys, trying to help my brother in law get his new float wet and we're in need of some parts.

Water adapters(water pump)
Intake manifold
Distributor(prefer hei)
T-stat housing
Flex plate
Mechanical fuel pump

Let me know what you guys have
(Near Redlands ca)

9
Engines / Engine Parts For Sale / Demon carb.
« on: July 13, 2016, 10:53:21 PM »
Demon 850 mechanical secondaries, everything as seen in pictures.
Could probably stand to be freshened up.
Located near Redlands. Will ship on buyers dime

10
Random Boat Parts For Sale / Hinges needed
« on: June 19, 2016, 08:36:24 PM »
Needing some hinges for my hatch and figured I'd check here before I order some.
Anyone have anything similar to this they care to part with?

11
Miscellaneous / Spam / Consew upholstery machine
« on: May 29, 2016, 02:46:22 PM »
Not exactly sure on model number, it's either 206 or 226 walking foot machine. My Dad used it for boat and auto upholstery, I just don't have the patience to learn.
$400. Located near Redlands

12
Miscellaneous / Spam / Ameron paint
« on: April 30, 2016, 03:54:02 PM »
Haven't opened the can, but I'd guess there's half or 2/3 can of blue, primer powder and thinner.

Free for the taking, located in Highland near Redlands

13
Engines / Engine Parts For Sale / BBC parts needed
« on: March 04, 2016, 01:05:11 PM »
A buddy of mine just picked up a 79 Crusader that has a BBC shirt block in it. I'm not positive of the casting number yet, he says it's gen 5 or 6.
Travis just left GS Marine and apparently he was told its got a hydraulic roller cam in it.

So, long story short, he's looking for advice as far as what heads to put on it.
Going to needs heads, lifters, push rods, rockers, valve covers and intake.

Anyone have any recomendations on a decent iron head or maybe have some parts they'd be willing to part with?

14
Miscellaneous / Spam / Oxy/acetylene set-p
« on: January 19, 2016, 09:01:22 PM »
So, I know cutting torches don't go well with boats. I'm trying to make some room and rid some things that don't get used. Have a set up same as this, just the cart is different(stole this picture from the web). 250cf/150cf bottles that are virtually full, hoses, regulators, torch and cart.
Figured I'd put it out there and see if there was any interest here first.

15
Miscellaneous / Spam / Drill press
« on: December 21, 2015, 08:01:14 PM »
Rockwell/Delta industrial table top, 115v. 1hp motor, 10 speed. 3 vises and stand included.
$275 located in Riverside

16
WTB / Msd/mallory
« on: November 15, 2015, 08:23:23 AM »
Figured I'd check here before I go buy new.
Looking at ditching the HEI and going MSD or Mallory.
Anyone have a BBC setup they'd be willing to part with?

17
Miscellaneous / Spam / Flatbed trailer
« on: November 14, 2015, 04:08:59 PM »
20' steel diamond plate deck, 8'wide behind fenders, 6'7" between fenders, 6'3" wide in front of fenders. Needs a couple lights replaced, could use paint. Was built for long travel rail. Located near Redlands. $1200

18
Engine Mechanical / Electrical / Indentifying Holley carburetor
« on: September 07, 2015, 01:44:02 PM »
I've briefly searched the interweb with no luck yet.
I have a Holley that the choke horn has been milled off. Is there any other way to identify what size it is?
The metering blocks have different numbers stamped on the side. Front has 73 jets, rear has 76

19
Engines / Engine Parts For Sale / Fiberglass scoop
« on: August 06, 2015, 10:23:18 PM »
Looking for a fiberglass scoop to mount on the doghouse of my cruiser. I'm not worried about single or dual carb, or even a tray for that matter. Just looking to simplify things a little.
 I'll have a single carb stainless scoop coming off.

Lets see what ya got??

20
Topock / Laughlin / Needles/Topock 7-25, 7-26
« on: July 21, 2015, 10:27:56 PM »
Anyone gonna be around Needles or Topock this weekend?

21
Engine Mechanical / Electrical / Carb questions
« on: June 15, 2015, 06:42:31 PM »
Alright guys, looking for some input.
I currently have an Edelbrock 1412(800cfm) on my, as far as I know, virtually stock 454. Runs pretty fair, until I get around the top end. If I get into the throttle to quick, it'll cough, and at times almost seems like it's running out of fuel. If I back out and ease into the throttle its fine.

My question is this: I know majority will say Holley. I've got a line on a ProForm 800 for what seems to be a fair price.(300obo)

Holley, Demon, ProForm, QuickFuel??

Ready, GO!

22
The No Wake Zone / Elsinore 4/12
« on: April 11, 2015, 06:14:58 PM »
Anyone going to Elsinore tomorrow?
Hoping to get out and tune

23
Miscellaneous / Spam / Thor Wanderer
« on: March 30, 2015, 11:24:32 PM »
1998 Wanderer 5th wheel 21.5, no leaks. Brand new wheels and tires, current reg., 3-way fridge, stove and oven. Cold a/c, forced heat, 15' awning. Hitch on rear.Two 7 gallon propane tanks with new hoses and regulators, updated power landing gear. Also have sliding hitch.
Can't pull it anymore. Truck is too high and axles are already flipped

24
Random Boat Parts For Sale / White 9 bolt steering wheel
« on: March 15, 2015, 05:44:09 PM »
Anyone have any use? Just replaced with a new one. Some of the stitching is starting to pull a little but will get you a season or two. Hate to trash it if someone here needs one.
Pick up near Redlands or pay for the ride and it's yours

25
Engines / Engine Parts For Sale / Set 'O gauges
« on: February 21, 2015, 02:50:09 PM »
I have a set of working VDO gauges. Speedo, tach, oil pressure, water temp and volts. Have sender for oil pressure. Tach and speedo are 3-3/8 diameter. Oil, water, volts are 2-1/16. Smaller mounting brackets were modified for angle cut gauge bezels.
Also have (5) 2-1/16 flat bezels that were anodized blue. Anodize has since worn/faded. Could be reanodized, powder coated or polished.

Gauges-45
Bezels-15
Located near Redlands, will ship if needed

Pages: [1] 2 3

Website Security Test
Powered by EzPortal

anything
Website Security Test