Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Joe Woosley

Pages: [1]
1
Arcade / Spoiler
« on: August 04, 2020, 04:55:24 pm »
Looking for a spoiler for the back of my youngblood. Just wanting to do something different.


Sent from my iPhone using SoCal Jet Boats mobile app

2
Arcade / Nitrous and my timing
« on: May 01, 2020, 07:45:11 am »
Is there anybody that can give me some advice on witch Direction to go on my nitrous. We put a new 632 in this year and my engine builder told me if I’m going to put a nitrous plate on it that I would be safe hitting it with 200 but anything over that I am going to have to work with the timing. I have a 6AL-MSD box in there right now. I have the jets to take it up to 500 HP hit but I was wanting to no if they make a box that I can install with my MSD box that I have now that can help me with the timing. I’m a plumber not a super mechanic. So I need some guidance so I don’t destroy my motor. Thanks for any help that y’all might have.


Sent from my iPhone using SoCal Jet Boats mobile app

3
Arcade / 1985 Youngblood TX-19
« on: April 17, 2020, 12:50:04 pm »
Hi everybody out there, I have a 1985 Youngblood TX-19 Condor.  I have had 3-other jet boats In my life and this one by fare is my favorite. It just handles so nice. I was wanting to no if anybody out there might no a little bit of the history of the Youngblood boats. I have seen some other condor jet boats out there that look identical to my Youngblood but called something else. So since I plane on being buried in this boat I would love to no a little bit more about it’s history. Any help would be much appreciated. Thank y’all so much, have a bless day and stay safe.


Sent from my iPhone using SoCal Jet Boats mobile app

4
WTB / Need oil pan for a 632
« on: February 05, 2020, 02:48:40 am »
I’m hopping that there is some one out there that can help me.... I had a 454 in my Youngblood last year and over the winter I ordered a 632.... told the builder it was for my jet boat but obviously here on the east coast these builders don’t know what a boat needs... went to install the motor over the weekend and the dam thing wouldn’t fit with an 8” oil pan. Sooooo I go to Jegs on Sunday and pick up what I thought was the fix. A Milodon 7 1/2 inch 10qt. Pan that said in the description that it was for marina use for jet boats...LOL... well not for a 632... after changing the pick up and doing a little cutting on the inside of the pan for the pick up I thought I was golden... wrong.... it looks like the stroke on this thing with aluminum rods it’s still just barely hitting the oil pan when I turn the motor over. It is not in the boat right now. I just pulled the plugs and was turning it over while on the engine stand. So I don’t no if anybody out there has a 7 1/2 inch pan that can clear the stroke of aluminum rods on a 632 Or can I do a little tapping and make this one clear. Any help would be much appreciated.


Sent from my iPhone using SoCal Jet Boats mobile app

5
Projects / Floor under motor
« on: December 15, 2019, 10:36:29 am »
Can anybody tell me if there is some good paint or epoxy that I can put under the engine I wanted to clean that up and make it look good before I put the engine back in. Any help would be much appreciated.


Sent from my iPhone using SoCal Jet Boats mobile app

6
Engine Mechanical / Electrical / NOS Project
« on: November 11, 2019, 09:27:15 am »
I didn’t no if there was anybody out there that could tell me were I could send my intake to.  I want to have a NOS Fogger installed on it.  My intake is an oldie but a goodie. Old Offenhauser high rise. I just need to make sure that the holes that the injectors will screw in to are straight and right we’re they need to be. I’m on the east coast “OHIO” but could send it anywhere.  Any help would be much appreciated thank you all and have a blessed day.


Sent from my iPhone using SoCal Jet Boats mobile app

7
Jet Pumps / Ohio ready
« on: April 30, 2019, 10:41:04 am »
Well we are getting close out here in Ohio for the good boating weather. I bought this boat in October and brought it home with boat on trailer and 2-pick up trucks full of crap. Some one started something and didn’t finish it. So I did. Got it out on the water yesterday because I new it ran but hell I didn’t no if it would float...LOL... it did float and I was really happy with its performance. It’s a solid 80 mph boat with no spray. And I don’t think I’m going to spray it. I’m happy right we’re it’s at.


Sent from my iPhone using SoCal Jet Boats mobile app

8
Arcade / Gauges for my boat
« on: February 20, 2019, 06:43:09 am »
Hey guys and gals.... I put all new gauges in my 85 Youngblood over the winter but I was wanting to no a little bit more about these new MPH gauges with GPS. They look pretty neat but they are a little pricy. Didn’t no if I should stay old school with the standers rubber hose going to the gauge. And Auto Meter makes them both for my set. Just thought I would check with my west coast friends out there because you guys are blessed to get to drop a boat in a glass all year round for the most part. I also sent another picture of a gauge that I can’t seem to find out what it used to do. It no longer works so I am going to have to replace it with something. Didn’t no if anybody could tell me what the purpose of it was. Again.... like always thank you all so much and y’all have a bless one.


Sent from my iPhone using SoCal Jet Boats mobile app

9
Arcade / DNA=HEADERS
« on: February 09, 2019, 12:28:08 pm »
I bought a set of these headers and just wanted to know if anybody can tell me if they’re good bad or otherwise they were cheap enough I thought I would give them a try thanks for any information y’all might be able to give me thank yall and have a blessed day


Sent from my iPhone using SoCal Jet Boats mobile app

10
Arcade / Rollins Machine
« on: February 06, 2019, 12:16:49 pm »
Can anybody out there let me no if they have ever heard of
ROLLINS MACHINE
D=010
B=030
This is what is stamped on my 454 in my boat.  I’m really hopping some one can tell me what the D & B with those Numbers mean. I took a picture of it but u will still have to zoom it in a bit. Hope the picture can help. Any info will be much appreciative thank you for your time and have a blessed evening


Sent from my iPhone using SoCal Jet Boats mobile app

11
The No Wake Zone / Condor
« on: January 27, 2019, 06:03:53 am »
I was wanting to no if there was anybody that might be able to help me with  identifying my boat. I have a lot of questions about it but I’ll start with this one 1st. I just bought this boat a couple of months ago and on the title it says it’s a 1985 Youngblood TX 19 and on the boat it says “Condor” I have seen a few boats on here that look a lot like mine but I don’t here anybody speaking of the Condor brand. Can anybody give me a little bit of  education on this. Hopefully it’s not a peice of crap. Thank y’all for any help u might be able to give me. After I get this question answered then I’ll get into the motor and jet on it to see if any of it is worth keeping. Thank you again and y’all have a bless day.

12
The No Wake Zone / Headers
« on: January 16, 2019, 09:01:52 am »
Hi everybody.... my name is Joe and I have owned jet boats most of my life and all of them has had log thru the hall  exhaust. I got out of the boating seen for about 20-years and stumbled on a jet boat threw a friend and I Purchased it. It is a 1985 TX-19 Youngblood. And it has a 454 with Bassett over the transit Header’s. I am spoiled with my other boats because it was pretty easy to deal with the water. Now I have water going into these Header’s and I called Bassett and they were rattling off about valves need to be opened 2/3 and other valves need to be opened so-so and on and on and on. Is there anyway to keep the headers but rout the water another way. I am just scared for the water to go back into the heads. I’m sorry this is so long and also I’m sure it’s a pretty stupid question at that. But more than anything I just want to say hay to everybody since I’m a new-be. I’m from out here on the east side “OHIO” thanks again to anybody that can set me straight .

Pages: [1]

Null

SMFPacks CMS 1.0.3 © 2022