Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - 77fordwind

Pages: [1] 2
Cars / Automobiles For Sale / 3rd gen 4runner 2wd
« on: February 07, 2024, 05:04:27 AM »
3rd gen 4runner 247k (on the chassis) 150k or so on swapped dealer motor.
Rough country 3" lift (monotube shocks).
Icon upper control arms.
New lower control arms/ball joints.
Underdog racing development MAF/TIMING
K&N intake.
Champion racing aluminum radiator.
BFG KO2'S 75%.
Sound system(head unit, amp, crossover, sub.).
Full Adjustable rear suspension.
 Truck runs and drives amazing ,everything works. Just did rear end service, tranny service, fresh oil and spark plugs,fuel filter air filter and coolant flush.Only cons is two small tears in front driver seat, clearcoat faded on roof and hood and power antenna doesnt extend. Title in hand first person here with $6000 cash!!! takes this gem home

Sent from my SM-A536U using SoCal Jet Boats mobile app

Audio / AV GAS
« on: July 08, 2023, 07:00:26 AM »
Anybody ever had AV disintegrate the needle o rings on their holley? I tore into the bowls and the orings were almost gone, unatomized fuel was bypassing the whole time. Just trying to figure out if it was the fuel or the extreme heat or both. Also I forgot to add a bit off mystery oil till the next day not sure if that had something to do with it as well.

Sent from my SM-A536U using SoCal Jet Boats mobile app

Projects / 73 wriedt maverick
« on: March 18, 2023, 01:10:33 PM »
Guess I lied and am in the mood for some more trials and tribulations! Came up on this Lil puppy for FREE basically and the hull ,stringers and transom are actually in good shape despite how it looks now. Couldn't wait on posting some pics as soon as I got it home, plan is to gut everything,strip it down flip it and go for broke! Here's a small list of things to come;
- 440 big block
- set back pump (split bowl, diverter, ect..)
- full interior
- trailer paint , bunks.

Sent from my SM-A536U using SoCal Jet Boats mobile app

« on: March 09, 2023, 04:44:38 AM »
Some suspension porn for the forum,
*3" rough country lift (monotube coilovers, shocks, springs)

*icon delta joint upper control arms

*275/75/16 BFG KO2'S

Next up 4:10 rear end re gear for better towing the boat if need be, fiberglass fenders and hood, rear glass delete and a few other regular things.

Shoutout to BAJA MIKE at OFW TEMECULA for all the help.

Sent from my SM-A536U using SoCal Jet Boats mobile app

Projects / 74 hondo
« on: February 14, 2023, 07:50:24 PM »
Does a 440 sound good in a jet boat? I have a built one in the shed from a 74 motorhome (was going to throw it in a 67 fury but the og motor got rebuilt instead)and there is a guy selling the mounting plates ,ot headers and a couple other mopar jetboat parts, someone better go get this before friday or it's mine and I go nuts before summer hahaha

Sent from my SM-A536U using SoCal Jet Boats mobile app

Boats For Sale / 76 southwind cruiser
« on: November 12, 2022, 10:31:20 AM »
Selling my baby... hurts but recent developments force me to sell.

472 BBF (50 HRS.)fully Rebuilt with forged internals - crank. Have all the paperwork and receipts.

Fully rebuilt pump with powder coat 12jc- a imp.
Intake powder coated and reset to hull.

Interior in great condition, hull shows some stress cracks and small imperfections but look great for its age and use. New trailer tires and bearings, trailer could use paint, bunks are still good.

I have over 8k invested in her and countless time and effort. I'm realistic on the value of these old labors of love,, ive enjoyed it for a couple years so just trying to get back what I can. I'll post more detailed pictures of the motor pump hull and interior when I get home.

Sent from my SM-A125U1 using SoCal Jet Boats mobile app

Arcade / Belgian malinois needs rescue
« on: October 31, 2022, 07:54:36 PM »
Giving this a long shot but this 1-2 year old male belgian malinois and his female pup ran into my yard Friday morning and the asshole owners down the street from me don't want them anymore I already have 3 dogs 4 cats and a bunny, I really need a good home for the male at least as I have all females. He is super sweet and well behaved just needs a good friend for a new owner, I've given both of them deworming treatments and parvo shots. Anyone who can please help out  it would be much appreciated.

Sent from my SM-A125U1 using SoCal Jet Boats mobile app

I/O's / Advantage 22pcat/ Cobra touch
« on: July 16, 2022, 09:22:51 PM »
Pretty much what my weekend looks like, everybody hears Cobra and thinks I can work on their OMC..good thing I don't mind picking up what others won't but I'll tell you pulling this 7.4 out of this 22 party cat was a little tricky, had to recruit a youngster to remove the starter hot and motor mount bolts on one side it was crazy tight down there. Going to be installing a brand new 7.4, rebuild and seal bravo 3 w/2 inch spacer as well as a bunch of other things that need to be replaced. Sorry for all the prop shit but nobody ever calls me to work on their
 jet boats ;( hahahah well one guy does and hopefully we can do a nice off season rebuild of his tdeck.

Sent from my SM-A125U1 using SoCal Jet Boats mobile app

Lake Havasu / Trippin
« on: June 22, 2022, 11:31:37 PM »
Heading out in a few hours.ill be there until Monday, keep an eye out for the yellow southwind.

Sent from my SM-A125U1 using SoCal Jet Boats mobile app

Arcade / Call me snake
« on: March 25, 2022, 07:11:24 PM »
Just some of the beasts I've been so blessed to get to work on, an opportunity arose and I took it. Doesn't even feel like work when you turn your hobby into a 9-5, kinda missing my old jet boat tho might be out at perris tomorrow.

Sent from my SM-A125U1 using SoCal Jet Boats mobile app

The Parker Strip / Launch at bluewater?
« on: October 17, 2021, 09:56:08 AM »
Looks a lil low

The No Wake Zone / Dogs on board
« on: October 04, 2021, 07:45:47 PM »
Last year in havasu

SoCal Lakes / Lake Perris
« on: October 03, 2021, 05:23:44 PM »
Great day out with the family

Engines / Engine Parts For Sale / Impeller identification
« on: August 26, 2021, 10:03:48 AM »
I thought this was A in this spare 12jg-a i have but looking at it there is an A on each side of the shaft.. Does that mean this one is an AA?

Engines / Engine Parts For Sale / WTB: CLEAN BBF HEADERS
« on: August 25, 2021, 02:03:14 PM »
Noticed some cracks coming in on my old panther logs so thats all the reason i needed to throw some pipes on it. Bye bye engine cover.

Events / Hot summer weekend
« on: August 20, 2021, 05:29:45 PM »
Made it, had to splurge and get a couple family rooms this time

Boat Showcase / Back in play
« on: August 14, 2021, 03:55:10 PM »
Didnt get done everything i wanted to get done but shes water worthy again at least, ill be at perris all day tomorrow got some bunk work to do and thats it.

Boat Showcase / Blast from the past
« on: August 04, 2021, 06:22:39 PM »
This was my pops 2nd or 3rd boat

 1975 or something in La verne, Ca.

Jet Pumps / Intake nightmare
« on: July 06, 2021, 10:29:30 PM »
The Sea goin epoxy did not cure properly or something but it forsure had leaks again, made a huge mess, a ton of work removing it and im back to square one. Ive called every shop within a hundred miles with no luck.dont know what to do this thing will have to go into storage till someone will touch it,  im out of options with this boat. Hopefully i can find something else to throw the fresh 12j &460 into in the meantime whenever that may be.

Projects / Paint therapy
« on: June 12, 2021, 08:34:33 AM »
This was a much needed break from setting that intake, time to get this baby dressed.

Jet Pumps / Berk intake install
« on: June 01, 2021, 06:04:43 PM »
Does anybody know someone ready and available to do this job?! Boat is prepped, intake is ready, money is there. yet seems everyone is too busy or just plain doesnt want to do it...

If not pray for me cuz im going to attempt the install myself this weekend, more than a lil nervous bout this one so any advice, photos or more preferably video guidance on installing this would be highly appreciated as well.

Project Boats For Sale / Open bow's
« on: May 29, 2021, 10:40:23 AM »
Looks like a couple cheap projects coming up, anybody know what brand boats these are? I know the one has a drake jet i think but i have an extra 12j i could swap? If no one picks these up by tomorrow ill probably take on at least one, maybe both.

Jet Pumps / 12J Intake removal
« on: May 26, 2021, 02:36:56 PM »

This is the worst thing ive had to do yet, am i doing something wrong here?? How do i get the bolts out? Im trying to be careful not to damage the hull but at this point i really just need it out!!

Project Boats For Sale / FREE HULL
« on: April 05, 2021, 05:31:59 PM »
79 rowdy open bow '20 jet boat


Had a bbf and a berk 12j.

Current reg. Title included.

Hull has no major damage and is salvageable, i just don't have the time, energy, money or space to do so but it would be a shame to have to take it to the dump by the end of the month.
I can deliver within 50 miles of perris ca.

Jet Pumps / 12JG-A project
« on: March 10, 2021, 04:20:36 PM »
 Picked this baby up for $100..
 I thought for the price may as well and he was right down the street, Going to rebulid this one myself and see what its all about.

Pages: [1] 2


SMFPacks CMS 1.0.3 © 2024