Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - jet fever

Pages: [1] 2
1
Need 460 pipes in bay area
Text 707 761 4305

2
Projects / Not Boat Related Trans
« on: August 16, 2015, 01:01:46 pm »
TCI Converter on a Hummer 168 Flexplate attached to TCI Streetfighter T350 with a Smeding 383 spining it all on the Z28

3
The No Wake Zone / no water big fires so we gotta improvise
« on: August 15, 2015, 07:31:26 pm »
Take a spin on the kids bike

Brraaaaap

4
The No Wake Zone / gotta tell this story
« on: August 13, 2015, 01:55:01 am »
My best friends lil bro called asked if I would go look at a boat that a guy that owns a boat shop has to trade for 2 jet skis straight up
I say well I dont care too much for said shop he says oh no its a new owner I said Okay lets roll.
Brappppp (cue Harley sound)
Roll up to a 78 mini day.
I see it has a panther.  I tell Him nope you don't want it.  But lets check it out.
"Homeboy" comes out and hes sellin Wolf Tix hard.  I listen
Hes like yeah its got a stereo blah blah blah. 
I asked what kinda Hull is this he says oh ask my wife...
She comes out and says its a Rainbow.
He says I replaced the water pump cover gasket blah blah. 
I say oh super tall lid on the doghouse it had a tunnel ram huh he says no.  Just stock.  Original had small block so they got taller lid cause now it has a big block.  Wish I had a pic of how tall and the shape- Red flag
He fires it up and he kept revin it then killed it.  I said let me hear it idle.  He says it wont - Red Flag. Dude you own a boat repair shop
I say the through trans exhaust hoses are new and I see a bolt stuffed in hole and caulked up I say oh it had wet stacks he says no - red flag
I say whens the last time it was out he said we just took it out.  I said oh did you blow out both exhaust flappers at the same time?  He says no they haven't been in there the few times I took it out.  I said do you whats possible if there aren't on there.  He had no clue - Red Flag
I say how do you know about the boat he says Ive know original owner it never had anything your talking about.  Ok.
I say the Panther looks original ticking time bomb.  He tells my buddy don't worry I got like 3 Berks in the shop....  RED FLAG!!!!
So I ask well how much cash are you asking he said 5,000...  His wife laughed at my facial expression.. I said ok for 5000 you can get a pretty great fucking ride this thing is worth like 1500.  What did u get it for he says 1600 and he put work into it and the guy couldnt pay and let it go.
he said I have an Eliminator Day cruiser for 10,000 for sale.  It has a BBC.  I asks what pump he says Berk I say no what model he thinks for about 30 seconds says I don't know then googles a pic of his own add on CL to show me.  I said Ok lets get outta here.
So most likely another jet boat shop around here will close up.  I mean how did you buy a boat shop and you dont even know a 12 Jc to a JG or that u cant just pull Panther off and slap a Berk on not cheaply anyway lol.
It was pretty amazing. 
GT Boats Cordelia Ca

5
The No Wake Zone / hours on motor/boat
« on: June 26, 2015, 03:28:12 am »
So I know there are many veriables but whats everones opinion on boat hours compared to Auto miles.
ex: for every 100 hours it could equal 10,000 miles???

6
Trailers / Info on Coyote trailers
« on: June 23, 2015, 11:01:57 am »
Anybody have a picture of Coyote trailer factory sticker or ensignia???


7
The No Wake Zone / Throwback Sticker Question???
« on: April 17, 2015, 10:07:59 pm »
Anybody know who or what the sticker of a lil dude holding a Hammer about?

8
Engine Mechanical / Electrical / Engine oil change
« on: April 11, 2015, 07:40:48 am »
What are some tips for Engine oil change
What are your tips for one or all of the following
*Easiest
*Cleanest
*Most efficient

Include tools used

9
The No Wake Zone / Does anyone ride mountain bikes?
« on: March 21, 2015, 05:34:27 pm »
Picked up my first 29er

Its a Jamis Exile Comp. 

Fun but another expinsive hobby lol

10
What gauge wires from fuel tanks to fuel gauge?

11
Trailers / Trailer tires
« on: March 17, 2015, 11:05:12 pm »
I currently have good tread but noticed some weather cracking on the Coyote dual axle trailer.

Suggestions on a specific brand to look for?
I choose quality over cheap as in no tires from Les schuab Ive never heard of cause they are from Vietnam. 

Thanx in advance

12
The No Wake Zone / Happy Birthday HallettDave
« on: March 07, 2015, 02:19:11 pm »
 :beer:

13
The No Wake Zone / nozzle trim handle? any clue who made it?
« on: March 06, 2015, 11:54:11 pm »
So on my ride I think its a Hall-Craft part but not sure.
No I dont currently have a pic but its Billet stringer mount and you squeeze the bottom and pull into the handle (which pulls the lock position tabs from selected degree angle) shift it then release the handle and the tabs fall into desired spot.
Im sure its not the only one but hell if I can find another one I just wanna know what brand it is (and Im bored at work)

14
Engine Mechanical / Electrical / Water Pressure
« on: September 05, 2014, 09:04:32 pm »
I just want to put this out there indirectly to anyone and just as general knowledge

Gate valves DO NOT and were NOT intended to control pressure.  As in the pressure coming from your pump to you engine cooling system.  That is for water volume not pressure.

  Yes large exits with gate valve at the inlet lets water pass through your block and have no pressure issues.  For some set ups this is not the case. 

Forget temp just talking PRESSURE. To help regulate pressure to the block people use relief valve on the coolant inlet to the block which is a suggestion as a tool to help fix a pressure issue.

you have an inlet and outlet of an engine block.  If you have too much coming in the front end and not enough out the back end pressure will build in the middle (which is inside your engine)

some people have pressure issues some don't. 

some let high pressure run fast through a gate inlet and out the back end quickly enough the pressure does not build inside the block and they have no issue.  In no way does that control pressure it just does not allow it to build.

Anyway I know were all tired of this just trying to get people to think of the pressure subject

15
The No Wake Zone / can you guys down south send back up some H2O
« on: August 22, 2014, 11:47:24 pm »
Can you please send a lil water back up this way

16
The No Wake Zone / Chevy HD front end issues. fixed for now
« on: August 22, 2014, 01:52:34 pm »
So I found out the hard way about Chevy HD issues.  They break or bend stock tie rods for one.  Second issue is the Center link can rotate or twist which can affect tires, alignment, tie rods.

Guess I gotta stop the 4wheel drifts through corners in my 4wheel drive.

I have a 6inch lift with 35inch Nittos.  Had HD Tie Rods but the center link twisted and broke the tie rod loose where it is machined and threaded where the factory installs the seal at the upper joint where u install grease.  So my lady pulled out from a paking lot and the drivers side wheel wouldnt turn.  When I got there the upper tie rod was laying there.  I used a pipe wrench and threaded it back onto itself.   

So I now have new Idler arm, Pitman arm, Cognito Idler & Pitman arm braces which help stop the damage of the center link twist and helps the Idler arm and Pitman arm last longer and I installed Fabtech HD Tie rods.

17
The No Wake Zone / Drought
« on: July 31, 2014, 06:37:41 pm »
Lake Mead is the lowest since it was built 1938. 

So theres no water in Norcal and the drinking water is low for all of Socal also.

Lets all sell our boats and call this place Socaldirtbikes.  Braaappp

18
The No Wake Zone / SCJB koozies needed
« on: July 30, 2014, 01:21:21 pm »
How bout some more Koozies. 

My beer wants one wrapped around it so bad its sweatin

19
The No Wake Zone / how bout a new order of koozies
« on: May 10, 2014, 06:07:10 pm »
Can we get a new batch of Koozies ordered?  Its that time of year again for em

20
The No Wake Zone / sum big ole slugs
« on: May 03, 2014, 12:54:35 am »
Check these out.

21
The No Wake Zone / Wish there was more water
« on: May 01, 2014, 10:13:08 pm »
They say El Nino will happen and next year will be better...  I hope so.

22
Engine Mechanical / Electrical / help with 496 cam selection
« on: April 08, 2014, 05:25:09 pm »
Opinions on 496 Chevy build.  Mark IV 2 bolt converted into 4 bolt, 10;1 bottom end complete forged crank and pistons. 

Question is opinion on head selection and cam selection.  Thinking AFR Heads around 305cc Roller cam off shelf non custom grind but dont want wrong power curve dont want too big and have no bottom end power.  So question is cam selection choice hopefully from experience. 

Berk 12jg will be rebuilt and matched.

I know alot of veriables but wheres a good place to start. Mid 80's Bahner open bow full stringer

23
Jet Pumps / whos the Berk pump builder to see in the Lone Star State
« on: April 05, 2014, 08:16:53 pm »
My good friend needs a Berk pump pro in Texas anybody have suggestions

24
Anybody run these carbs?  Any advantages/disadvantages

25
Engine Mechanical / Electrical / Holley 3310 NO DASH Carb Rebuild Kit # ???
« on: September 22, 2013, 01:24:39 am »
Anybody know which Holley rebuild kit # will work for a 3310 NO DASH Carb.





Pages: [1] 2

Null

SMFPacks CMS 1.0.3 © 2022