Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - UltraRed

Pages: [1] 2
The No Wake Zone / F$%king Theives
« on: November 06, 2012, 11:52:09 am »
My F250 was stollen from out front of the house yesterday morning  :mad:. The neighbor two houses up has surveilence on the front of there house. You can see them pull up at 4:42 in the morning still 4:42 and the damn dome lights turn on and at 4:44 the headlights turn on and the truck is gone. The assholes were fast. Unfortunately we cant see any license plates in the video so who knows if we will ever see that truck again.
" alt="" class="bbc_img" />     

Boats For Sale / 1996 Ultra Bubble Deck
« on: October 17, 2012, 03:10:27 pm »
1996 Ultra 19' Bubbledeck
I bought this used at the begining of the season. Only problem I had at all this season was the fuel pump crapping out. Put a new one and no longer have issues. Previous owner had work done to the boat from GS marine, Tom Papp, and Dirty Dave's. Westec Dyno sheet shows 521hp at 5400rpm and 572tq at 3900rpm. Back interior panel needs to be fixed. Big tare.
454 w/ B&M 144
 Berkeley Split bowl with Droop, Hyd. Diverter, shoe, and ride plate
 MSD Ignition
 Indmar thru transom headers
 Dual Batteries (new this season)
 So far i have hit 81gps not sure but there is probably more. The boat will start to porpus and would probably really benefit from someone fine tuning the ride for top speed.
The trailer is a tandem Hensley with new tires. My truck had a blowout on the way to Blythe which tossed us into the gravel shoulder and in turn pitted the trailer. Other then looks the trailer is solid. Have titles for both the trailer and boat.
$9000obo and not the usuall SCJB offers  ;)
Will sell without power for $4500

SoCal Lakes / Lake Elsinore
« on: June 15, 2012, 08:42:01 am »
Since I was unable to make the fathers day float we will be headed out to Lake Elsinore for a few hours in the morning. Anybody else gonna be out there

Boats For Sale / 1996 Ultra Bubble Deck
« on: June 14, 2012, 02:26:22 pm »
Letting the Ultra go already. Really need to take the money and clear out some debt.

Hulls / porpous
« on: May 09, 2012, 07:59:28 am »
Not sure if this is in the right section but was hoping to get opinions and advice. I have been out testing this week and found I have a really bad bow to tail bounce (porpous) at around 75. The pump is a split bowl with a place diverter and set back aways. There is also a ride plate. What i am wondering is if the ride plate is at a bad angle. I have tried fixing it with the diverter but had no luck at any angle. Would take pictures but i am at work. Any ideas or suggestions???

The No Wake Zone / Adding image to signature
« on: May 08, 2012, 01:51:27 pm »
Noticed a few of yuo have images in the signature. How do i do that

The No Wake Zone / lake elsinore
« on: May 02, 2012, 08:53:25 pm »
come hang with us on sunday.... gonna be rockin....  O0

The No Wake Zone / This weekend
« on: April 20, 2012, 07:49:34 pm »
What is everybody up to this weeked. Anything exciting? Me the GF and kids are headed out to the Lucas offroad series at Lake Elsinore MX Park

Engine Mechanical / Electrical / Rev limiter
« on: April 20, 2012, 07:47:56 pm »
Guys i have a MSD-6m2 box. I know the 6M2L (or something like that) has the built in limiter. What can i do to mine to limit the motor to about 5500 besides for keeping my foot out of it.

Boat Showcase / 1996 ULTRA
« on: April 16, 2012, 05:20:14 am »
Finally got the new family float...

Looking forward to a good season

Engines / Engine Parts For Sale / WTB: fiberglass scoop
« on: April 13, 2012, 08:29:46 pm »

Looking for a scoop and tray.
Not sure what carb is on it and the guy cant remember 
However it is a single carb.

Let me know what you guys have...

WTB / Fiberglass scoop
« on: April 13, 2012, 02:53:15 pm »
Looking for a scoop and tray.
Not sure what carb is on it and the guy cant remember  :o
However it is a single carb.

Let me know what you guys have...

Engine Mechanical / Electrical / B&M Blower ID
« on: April 05, 2012, 03:09:21 pm »
Anyone know what B&M this is? Just Curious... Its on a 454

Project Boats For Sale / 19' Sanger Hydro
« on: April 04, 2012, 04:16:04 pm »
Found this on craigslist SD. Figured some of you project guys might take an interest.

Project Boats For Sale / 1977 Tahiti Project
« on: March 17, 2012, 11:23:18 am »
1977 Tahiti
Running 460, 55.1 on GPS before carb rebuild and adjustments
Holley 850
Jacuzzi WJ jet w/ place diverter
Trim Tabs
Tandem Trailer
Titles for both
Bought as a project but do not have the interest in finishing. Trades welcome
1500 OBO Price is not firm. Bring all offers... I prefer not to part it out unless i have buyers for everything
My buddy Thomas knows more about the boat as he was the one to get it running. The boat is currently stored at his house in Menifee. Please feel free to call him and ask questions 951 333 7556 or you can e-mail me and i will try.

Project Boats For Sale / 1976 Kona Makai
« on: October 26, 2011, 10:49:53 am »
Looking to get rid of this project and start work on my miniday.

Ran fine around the middle of this season. Out at Blythe one weeknd the boat worked great on Friday but didnt want to start on Saturday. Found that the boat didnt want to fire under load, motor was flooding out. Put it back on the trailer and drove up to the house. Got the motor to start and noticed a bad almost grinding noise when i shut it off. Havent started it since as i got a bigger family boat. Ive had this on CL for 4 months now and have taken the price from 2500 to 1500. All ive had were offers for trades that i did not want. I am now needing cash not trade.

1500 as is. 17'6" Kona Makai, Trailer, Interior (5/10) 460 ford needs work, Rewarder TT's, Mallory Distributor, Holley 800, Manual place diverter, Berkeley 12jc, Newer Gauges, etc...

1000 for the haul, trailer and interior only

Gelcoat / Paint / Fireberglass Repair / Winter project
« on: September 28, 2011, 07:57:02 pm »
I recently picked up a 1977 20' tahiti mini day as project for this off season (really want to complete this with my friends and I). This thing is weeded but the price was right... Needs trailer rehab (but a sound foundation) paint and interior. Motor was thought not to run but working on getting that going to see if it needs a complete tare down and rebuild and to check the pump (jacuzzi WJ) before everything is removed!!!!

So my paint question is this... What are the proper steps and products for complete prep and paint of the hull. What kind of paints are suggested. Looking to do white with an updated red, grey and black design. What are the steps to spraying multiple colors and a clear. Would like it to really hold up. Leaving/replacing the rub rail and not looking to do any candies or flakes. Pretty basic good looking job. I know alot of you have completed this task before so im looking for advice.

I am asking the questions now so i can start in a couple of months and have the correct stuff (products & tools) ready to go. Thanks a head of time guys

WTB / WTB: Berkeley
« on: September 15, 2011, 12:27:23 pm »
Hey guys I just picked up a 22 mini day tahiti from a friend (should be coming home on the weeknd of the 24th) but it has a Jacuzzi WJ. I would like to change to a Berk 12-JC (split if you got it) with out breaking the bank. So looking for Berk 12-JC what do you have...

WTB / 460 motor mounts
« on: September 07, 2011, 11:27:59 am »
Looking to get a decent set of BBF 460 motor mounts on the cheap. I am in the Menifee, Ca. area

WTB / WTB: 460 parts
« on: March 24, 2011, 09:05:06 pm »
Was talking with a few guys a couple weeks back in the engine tech section. Started to get an idea of what i wanted and what was needed $$$ and then BAM ex-wife issues...  :banghead: Now i would just like to hop up the boat a little and say screw the paint and interior till next year... If you guys have 460 parts for sale let me know. Anything post pics, p.m. what ever you have to do just get them out. starting to feel the rush for the season fast approaching. Don't have a lot of cash after this couple weeks but i do have some project money left over.

Engine Mechanical / Electrical / Ford guys... Need an opinion
« on: March 02, 2011, 12:22:14 pm »
What is your opinion about this... I am currently running what is thought to be an unmolested D9TE-AB. Would this work or am i asking for trouble.

Ported D3's with CJ valves
Scorpion pedastal mount roller rockers
Port matched Performer intake(nicely done)
780 Holley Street Avenger carb. Elec. choke. Vacuum secondaries
Custom length comp cams pushrods
Hyd. cam and lifters. Nice choppy idle with good vacuum. Pulls hard to 5500-6000

This is a complete setup that will get you at least 500HP. I'm running flat top pistons and am right around 10:1 compression. The car made 450 lbs of torque at the wheels at 4K. Engine is in the car at this time. I'm wanting the new TFS 325 heads and a big solid roller so I need to sell this stuff first. I'm just north of Nashville, TN.

Let me know...

Engine Mechanical / Electrical / newbie with questions
« on: February 24, 2011, 09:23:24 pm »
Hey guys. First off thanks for the wealth of information i have already collected. So i have a few questions. I have a pair of BBF 460 Rewarder TT headers and the finish is getting kinda corroded/rusted. I hope to re-due the boat in red and white before the summer starts. Am i able to have the headers powder coated? The motor is bone stock out of a I wanna say 86 or so F350. The heads are stock dove-A's. What can be done on the cheap to add a little extra go to it. Maybe a cam, but what can i get away with? I have a nice set of polished/chrome Holley 600 something or the other in the garage and was looking at going to a tunnel ram if possible with those. Also can a tunnel ram be powder coated. Any help would be appreciated.....

Interior / Bimini
« on: February 17, 2011, 06:33:51 am »
Not sure if this is the right spot to post this, if not forgive me and move it. Can any of you tell me where I can get black bimini hardware (black poles, mounts, everything black minus the straps and bimini material). Havent been able to find any

Gelcoat / Paint / Fireberglass Repair / Kona capping
« on: February 17, 2011, 06:30:34 am »
Hey guys. I was starting to get the boat ready for paint... How much of a pain is it to cap a boat. Seen some pictures and it looks to be a PIA. Also anybody have any pictures of a kona or like hull capped. Seen plenty of other hulls but wanted to see mine before a desicion is made. Thanks

WTB / WTB: 4" tips
« on: June 24, 2010, 09:29:01 pm »
I just scored some killer Rewarder TT"s  :thumbup:but need some tips for 4" w/ internal flappers not the 3" that i already have on the boat. I swear i saw someone on hear that was making them... Anycase help a fellow SCJB'er out

Pages: [1] 2


SMFPacks CMS 1.0.3 © 2023