Whats the history on this boat? Never heard of Targa. Did they lay the boats up them selves or did Spectra and they just rigged it or something? I really like it. Is there anything done to the motor or mostly stock?

From what I have heard after spectra folded up, a few different companies produced this hull. Eliminator, Carribean, Targa, etc. This is a solid layup, full stringer boat. There are only 2 little tiny stress cracks on the entire boat and that's on the deck where the bulkhead is. Also this is SALE PENDING!

I got a bigger boat so this one has got to go.
Cleaning all the toys and stuff out of it this weekend.
It's a 1983 original gel, original upholstery. It's pretty good for its age. Has a Berkeley pump and a 454.030" over.
 I have put swim steps, a hydraulic diverter, foot throttle, 4"ss slash cut tips, and Bimini on it. Carb fully rebuilt by CandJ last season and automatic bilge pump installed..
Otherwise it's all original. It has 467 total hours on the boat, way less on the motor. It's on a tandem axle trailer that I put a new hitch and redid the v block on. The boat is turn key and runs about 65+/-. It rides and handles very well. Sits low in the water and gets comments every time we are out. Everyone loves the gel coated hatch. I am technically the 2nd registered owner, 3rd owner of the boat. I have a folder with every single invoice and piece of paper this boat has ever had. 
$8000.00 obo. Boat is in Vista, Ca. 760-522-3692

This could be your family this summer, what are you waiting for.



Got it out of the garage and got it washed up.









The custom cover is old so I used a pep boys cover over the top to keep the UV from eating it up.

Most boats use a bracket that bolts under the carb, think of it as a 1/8" carb spacer. The have them at all the big catalog places like CP and Rex

I have a 1/2" bender from Parker. It bends SS nicely, you can borrow it as long as I get it back at some point
It did these

I like the cheap oscillating tool from harbor freight. You can get right up against the floor without cutting through. It worked amazing on my tunnel. I had the bulkheads out in minutes without kicking dust up everywhere

I think hes talking about his travel trailer....not his boat lol

Lol good call. That river gets skinny in anything over 21'

Ken have you ever been to big river with your boat? Not too many 24'ers on the water that I can recall. Due to the water fluctuation most the big boats stay on the strip.

Graphics

http://www.keystonbros.com/ontario-canada
Dont let the link fool you its in ontario cali. They have the real plush stuff that they put in wakeboard boats.

Found them on iboats the cheapest. Everywhere else wanted $100+ took a week to get here from like New Jersey or somewhere over there.

1" tube 304 SS
1" x 1/8" flat bar 304SS
Angled at 16* to have the step sit level when mounted on the transom
Built a quick and dirty jig to make fitup easy

who did the upholstery, looks really good