updates

some more

keep forgetting my camera    but here the cover mounted

Some photo's for your morning

the curve holds the shape of the Interior panels under the bow, There's a reason why it needs that long curved lip, you'll see later, the short blocks are only there to hold the two panels together while the back gets glassed






The day started off great, We got in early and rinsed out the shop and the boat





I was able to get a Surface gelcoat layer on the Ice chest innards,







Since everything was going really smooth today I decided to slip while grinding on the scoop and cut a window in my hand to see what my knuckles looked like on the inside






Some superglue  and some Fiberglass fibers and back to work

Any guesses at what Justin is making?

Now it lifts out







the green is the pva layer











cleaned and trimmed









Here's the place where they will be, The marks you can see are where I filled minor imperfections, once its sanded a little more I'll spray a uniform layer of gelcoat










I'll get to the insulation for it later, so dont ask!

Refreshing to see skilled craftsmen at work.......

Is that a joke about my toolbox

these are the bandpass sub boxes for two of the four  JL Audio 12" subs that Justin built for the rear, and no, they are not touching the headers! about three inches of clearance







undergoing the first of many sealing stages





the 12's up front will be in sealed boxes












Justin getting dirty making the wall for under the bow

Since all the scoops I saw were the same silly stuff, I came up with my own









Here's  the basic shape still needs trimming and smoothing out







giving it some shape

Here it is, It's the bosses purple dinosaur

A sweet pic of the paint


Now a 1/8" thin Layer of wood
follow by layers upon layer of glass






Here it is after glassing and cutting out for where the scoop will go, notice my badass spark arrestor