Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Joe Woosley

Pages: [1] 2 3
1
Random Boat Parts For Sale / Re: Dominator Jet Pump for sale $3100
« on: October 04, 2022, 12:48:47 pm »
Do you still have the dominater pump?? You can text me back if u like at 740)404-0247

2
Arcade / Re: Spoiler
« on: August 04, 2020, 06:03:34 pm »
It might... but it would look cool


Sent from my iPhone using SoCal Jet Boats

3
Arcade / Spoiler
« on: August 04, 2020, 04:55:24 pm »
Looking for a spoiler for the back of my youngblood. Just wanting to do something different.


Sent from my iPhone using SoCal Jet Boats mobile app

4
My friend.... that boat is stunning.... can’t wait to see it completed. You are a hell of a craftsman.... nice job bro.


Sent from my iPhone using SoCal Jet Boats

5
Arcade / Re: Nitrous and my timing
« on: May 01, 2020, 07:48:53 pm »
Thank you so much man. Do u think that this would work all the way up if I hit it with the 500 HP.


Sent from my iPhone using SoCal Jet Boats

6
Arcade / Nitrous and my timing
« on: May 01, 2020, 07:45:11 am »
Is there anybody that can give me some advice on witch Direction to go on my nitrous. We put a new 632 in this year and my engine builder told me if I’m going to put a nitrous plate on it that I would be safe hitting it with 200 but anything over that I am going to have to work with the timing. I have a 6AL-MSD box in there right now. I have the jets to take it up to 500 HP hit but I was wanting to no if they make a box that I can install with my MSD box that I have now that can help me with the timing. I’m a plumber not a super mechanic. So I need some guidance so I don’t destroy my motor. Thanks for any help that y’all might have.


Sent from my iPhone using SoCal Jet Boats mobile app

7
Arcade / Re: 1985 Youngblood TX-19
« on: April 17, 2020, 07:33:53 pm »
Thank you so much.  I just hope we all get to do some boating this year.  Definitely been crazy around here.


Sent from my iPhone using SoCal Jet Boats

8
Arcade / Re: 1985 Youngblood TX-19
« on: April 17, 2020, 07:03:14 pm »
I’m just about 30-miles East of Columbus. About 10-min. From buckeye lake. It’s the only place I’ve taken this boat since I’ve had it. Just put a 632 in it over the winter and it runs pretty good.. took it out a couple weeks back. Had a weekend that was pretty nice.


Sent from my iPhone using SoCal Jet Boats

9
Arcade / Re: 1985 Youngblood TX-19
« on: April 17, 2020, 05:39:46 pm »
Thank you so much.... it took me a couple of pick up trucks to get it home. The guy I got it from took it all apart and then never put it back together.  So it’s always fun putting something back together that some one else took apart.  Thank you so much for this info.


Sent from my iPhone using SoCal Jet Boats

10
Arcade / 1985 Youngblood TX-19
« on: April 17, 2020, 12:50:04 pm »
Hi everybody out there, I have a 1985 Youngblood TX-19 Condor.  I have had 3-other jet boats In my life and this one by fare is my favorite. It just handles so nice. I was wanting to no if anybody out there might no a little bit of the history of the Youngblood boats. I have seen some other condor jet boats out there that look identical to my Youngblood but called something else. So since I plane on being buried in this boat I would love to no a little bit more about it’s history. Any help would be much appreciated. Thank y’all so much, have a bless day and stay safe.


Sent from my iPhone using SoCal Jet Boats mobile app

11
WTB / Need oil pan for a 632
« on: February 05, 2020, 02:48:40 am »
I’m hopping that there is some one out there that can help me.... I had a 454 in my Youngblood last year and over the winter I ordered a 632.... told the builder it was for my jet boat but obviously here on the east coast these builders don’t know what a boat needs... went to install the motor over the weekend and the dam thing wouldn’t fit with an 8” oil pan. Sooooo I go to Jegs on Sunday and pick up what I thought was the fix. A Milodon 7 1/2 inch 10qt. Pan that said in the description that it was for marina use for jet boats...LOL... well not for a 632... after changing the pick up and doing a little cutting on the inside of the pan for the pick up I thought I was golden... wrong.... it looks like the stroke on this thing with aluminum rods it’s still just barely hitting the oil pan when I turn the motor over. It is not in the boat right now. I just pulled the plugs and was turning it over while on the engine stand. So I don’t no if anybody out there has a 7 1/2 inch pan that can clear the stroke of aluminum rods on a 632 Or can I do a little tapping and make this one clear. Any help would be much appreciated.


Sent from my iPhone using SoCal Jet Boats mobile app

12
Sorry it has taken me so long to get back with ya Jim... I live in Ohio so I was wanting to no first if you would be willing to ship it to Ohio??? If so I’ll just give ya my cell # and we can work out all the details. Thanks buddy....
                   Joe


Sent from my iPhone using SoCal Jet Boats

13
Is this still for sale????


Sent from my iPhone using SoCal Jet Boats

14
Projects / Floor under motor
« on: December 15, 2019, 10:36:29 am »
Can anybody tell me if there is some good paint or epoxy that I can put under the engine I wanted to clean that up and make it look good before I put the engine back in. Any help would be much appreciated.


Sent from my iPhone using SoCal Jet Boats mobile app

15
Thank ya


Sent from my iPhone using SoCal Jet Boats

16
Is there a phone # that I can call ya on ??


Sent from my iPhone using SoCal Jet Boats

17
Engine Mechanical / Electrical / Re: NOS Project
« on: November 12, 2019, 10:25:59 am »
Awesome... thank you so much for getting with me.  I’ll check it out.


Sent from my iPhone using SoCal Jet Boats

18
Engine Mechanical / Electrical / NOS Project
« on: November 11, 2019, 09:27:15 am »
I didn’t no if there was anybody out there that could tell me were I could send my intake to.  I want to have a NOS Fogger installed on it.  My intake is an oldie but a goodie. Old Offenhauser high rise. I just need to make sure that the holes that the injectors will screw in to are straight and right we’re they need to be. I’m on the east coast “OHIO” but could send it anywhere.  Any help would be much appreciated thank you all and have a blessed day.


Sent from my iPhone using SoCal Jet Boats mobile app

19
Hi there.... I was wanting to no if these prices are still good now ???


Sent from my iPhone using SoCal Jet Boats

20
Jet Pumps / Re: Ohio ready
« on: May 24, 2019, 02:38:51 pm »
Nice man!!!  I just picked up a Cali boat, and I'm located in PA.  Mine needs a little work yet, but yours looks great!!
Thank you so much man.... sorry it took so long  to respond works been crazy but I’m hopping to get it out on the old Buckeye Lake and maybe do a little runnen


Sent from my iPhone using SoCal Jet Boats mobile app

21
Projects / Re: 1976 Rogers TR Face Lift
« on: May 13, 2019, 08:21:12 am »
Dude..... that thing is a work of ART.... stunning..... I love it... what power plant you got motor and pump. NICE JOB BRO


Sent from my iPhone using SoCal Jet Boats

22
Jet Pumps / Re: Ohio ready
« on: May 09, 2019, 08:49:02 am »
Just got the boat back from having a little shade added....didn’t turn out to bad.... also got a little bling on the trailer for night time


Sent from my iPhone using SoCal Jet Boats mobile app

23
Jet Pumps / Re: Ohio ready
« on: May 02, 2019, 02:28:52 pm »
Heck ya man.... it sure would be nice to run with some of my own kind. Nothing against those prop driven sleds.... I just love my jet. U can look all day long here in Ohio and not see another jet boat. But u can see 15-Baha boats that literally are all identical you don’t see that with Jet Boats. Anyway.... I hope u can get that motor in man so u can enjoy your summer. U take care my friend and have a bless day.


Sent from my iPhone using SoCal Jet Boats

24
Jet Pumps / Re: Ohio ready
« on: May 01, 2019, 06:24:12 am »
We usually go out to buckeye lake. Now that the dam has been fixed there up and running again. Just took the boat out Monday and the lake is up. Thanks for the complement man.


Sent from my iPhone using SoCal Jet Boats

25
Jet Pumps / Re: Ohio ready
« on: April 30, 2019, 11:01:44 am »
Thank you.... it wasn’t that pretty in October...LOL... my wife was not happy bringing home a project this big. But it’s all good now.


Sent from my iPhone using SoCal Jet Boats

Pages: [1] 2 3

Null

SMFPacks CMS 1.0.3 © 2022