Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Btcampbell

Pages: [1]
1
Hulls / Re: Nordic
« on: May 13, 2021, 08:02:06 AM »
Thank you

2
Hulls / Nordic
« on: May 05, 2021, 07:13:13 AM »
Anyone have any input on Nordic v hull.  Good or bad

3
Jet Pumps / Re: Berkeley ig pump
« on: April 27, 2021, 10:06:07 AM »
Will do. Reckon a bowl inspection is in order. Thanks for the info. This is my first jet boat as you can tell, lot of things to learn. 

4
Jet Pumps / Re: Berkeley ig pump
« on: April 27, 2021, 03:58:06 AM »
Dang sgriffin!  So today I checked the bowl grease,(90wt) and it seems low or empty. Only been out twice on 30 or 45 min runs. I filled it back up and it didnt take very much. How much does it take to fill when empty. Sorry for all the questions.

5
Jet Pumps / Re: Berkeley ig pump
« on: April 26, 2021, 06:14:33 PM »
I donít know about loader or inducer

6
Jet Pumps / Re: Berkeley ig pump
« on: April 26, 2021, 05:55:04 PM »
Yes for the block cooling. I was told it is a stainless impeller

7
Jet Pumps / Re: Berkeley ig pump
« on: April 26, 2021, 04:31:04 PM »
Gauge on intake manifold. Thanks Flusher, yea your probably right just tired.

8
Jet Pumps / Re: Berkeley ig pump
« on: April 26, 2021, 11:05:51 AM »
If Iím moving and hit it,seems to do fine. Also noticed at idle there is no pressure showing on my gauge the goes up to about 20 or 30 when I accelerate

9
Jet Pumps / Re: Berkeley ig pump
« on: April 26, 2021, 09:53:46 AM »
I just got it as a hull in September (mantra tunnel), just got a motor in it (496 bbc), wiring, etc. well you probably know what Iím talking about. Iíve only had it out twice. I did hit the grease fitting about 4 pumps and topped
Off bowl with marine grease

10
Jet Pumps / Berkeley ig pump
« on: April 26, 2021, 03:47:36 AM »
What do yíall think is the problem? If I stomp on it from a stop it feels like pump slips, almost like a clutch slipping in a car????? Sometimes when idling it makes a rattling noise.

11
Gelcoat / Paint / Fireberglass Repair / 5/16 hole thru hull
« on: February 17, 2021, 05:05:56 AM »
Hey fellas how do I fix a 5/16 holes that have been drilled thru hull. Someone did this to mount the seats and I want to repair them and mount with aluminum angle on stringers. Thanks

12
Engine Mechanical / Electrical / Re: O/T Headers
« on: October 15, 2020, 05:48:01 AM »
Yes I do have a exit. CP sells a dump port with a built in pressure relief valve, has anyone tried one of these?

13
Engine Mechanical / Electrical / O/T Headers
« on: October 14, 2020, 08:46:24 AM »
What is the best way to plumb the cooling lines for engine when running dry headers? Do I need to run a pressure relief dump? 

14
Hulls / Re: 1988 mantra tunnel
« on: September 20, 2020, 12:58:25 PM »
Hot foot bracket

15
Hulls / Re: 1988 mantra tunnel
« on: September 20, 2020, 11:37:06 AM »
I have seen in pics of boats the accelerator peddle is attached to a bar that is mounted between the stringers, does a company sell them? I would like to do this to mine

16
Hulls / Re: 1988 mantra tunnel
« on: September 20, 2020, 04:53:54 AM »
Is that your boat in your avistar? Looks nice! Is it a tunnel hull

17
Hulls / Re: 1988 mantra tunnel
« on: September 19, 2020, 06:39:34 PM »
Hey I appreciate the responses, just trying to get all the info I can. Not trying to break any speed records, just wanting a little ripper for around the home lake.  Lol

18
Hulls / Re: 1988 mantra tunnel
« on: September 19, 2020, 05:14:45 AM »
Now ya got me worried! No its measures 16.6 ft. From what I have found it is an old drag boat. Its got a berkeley 12JG/ R pump on it. I'm just wanting to run 60 or 70 mph

19
Hulls / Re: 1988 mantra tunnel
« on: September 18, 2020, 02:55:54 PM »
T

20
Hulls / Re: 1988 mantra tunnel
« on: September 18, 2020, 02:52:01 PM »
Some more pics. Gotta scrounge up a motor now

21
Hulls / Re: 1988 mantra tunnel
« on: September 18, 2020, 07:17:17 AM »
Here are some pics from add

22
Hulls / Re: 1988 mantra tunnel
« on: September 18, 2020, 06:57:31 AM »
Thanks, didnít know if it was another name for tunnel hull or not. Gonna try to post some pics of mine tomorrow

23
Hulls / Re: 1988 mantra tunnel
« on: September 17, 2020, 07:14:21 AM »
Thanks TrollerDave. What is a gull wing?

24
Hulls / Re: 1988 mantra tunnel
« on: September 17, 2020, 04:54:16 AM »
Donít know how to post pics. Just wondering if anyone knows about these boats

25
Hulls / 1988 mantra tunnel
« on: September 16, 2020, 11:42:13 AM »
Hello new to group. Just got a 16í mantra tunnel, anyone know anything about this hull?

Pages: [1]

SMFPacks CMS 1.0.3 © 2021