Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - PBWOOD

Pages: [1] 2
1
Random Boat Parts For Sale / Re: WTB RIDE PLATE
« on: May 19, 2011, 02:39:09 pm »
i can make one out of an empty beer box an duck tape to lupo i need it to stay on when it in the water??? :screwy: oh and i was but deallin with the dude un the past he can do it but he lags he might be done next year if he starts on it today.

2
Random Boat Parts For Sale / WTB RIDE PLATE
« on: May 17, 2011, 07:36:36 pm »
DOES ANYONE HAVE A RIDE PLATE 4 SALE??? ;D

3
Engine Mechanical / Electrical / WATER IN OIL
« on: April 03, 2011, 10:00:19 pm »
THIS IS A QUESTION FOR A BUDDY...HE HAS PULLED HIS VALVE COVERS AND HAS MILKY OIL AT TOP AND I DONT REALLY NO IF THATS NORMAL..HE HAS WATER INJECTED HEADERS AND I THINK THEY MIGHT BE DRAINING BACK INTO MOTOR EVERY TIME HE SHUT DOWN..ANY SUGGESTIONS :-\ :-\ I DONT NO IF THIS IS NORMAL???

4
Engine Mechanical / Electrical / Re: COMPRESSION RATIO
« on: April 03, 2011, 09:56:15 pm »
OKAY IM BACK JUST TOOK A STARTER AND THREW IT ON THE MOTOR HOOKED THE COMPRESION GAGE TO IT AND GOT 120 ALL THE WAY AROUND?????? :screwy: :screwy: :screwy: :o IS THAT GOOD

5
Project Boats For Sale / Re: 93 CP OPEN BOW
« on: March 30, 2011, 08:58:49 pm »
pict up the new 1 sittin in the driveway.lupo el cap on sat.german1 might go..tell him i can tow him around the lake >:D.till he gets a motor

6
Engine Mechanical / Electrical / Re: COMPRESSION RATIO
« on: March 30, 2011, 01:27:43 pm »
HEADS ARE 113CC

7
The No Wake Zone / Re: Employed by the state of california
« on: March 30, 2011, 01:24:14 pm »
maybe not since im based in cali they probably think im gettin it in the rear hard enough by cali.or do they?? :sly: :sly:since when did the government ever have feelings???oh thats right they elected OBAMA. :-X :-X >:D >:D >:D

8
The No Wake Zone / Re: Employed by the state of california
« on: March 30, 2011, 01:19:27 pm »
i dont think they should take taxes out claim exempt youll pay nevada the tax not cali..hell if you fuel up in nevada youll save even more.calis about to charge another 1.00 a gallon to state tax just to get this dump out of dept...look out here i come nevada..that s weird i work in az,utah and nevada,ship even texas.thats weird they must owe me tax return.. :screwy: :screwy: :screwy: :sly: :sly: O0

9
Project Boats For Sale / Re: 93 CP OPEN BOW
« on: March 30, 2011, 10:56:26 am »
cmon some one wants this boat :'( :'( ;D :thumbup: :thumbup:

10
Project Boats For Sale / Re: 93 CP OPEN BOW
« on: March 30, 2011, 10:51:33 am »
heres some after pics without carpet

11
Project Boats For Sale / Re: 93 CP OPEN BOW
« on: March 29, 2011, 08:29:16 pm »
before

12
Project Boats For Sale / Re: 93 CP OPEN BOW
« on: March 29, 2011, 08:26:23 pm »
got some more parts like chrome valve covers 120 amp chrome starter distributer..can get 80% of the motor parts to throw in just make an offer.. :thumbup: :thumbup: :beer: :beer: ::)

13
Project Boats For Sale / 93 CP OPEN BOW
« on: March 29, 2011, 07:34:32 pm »
1993 cp open bow no motor..had interior hull work done to it..hull is solid as a rock..minor interior work needs to be done..nice real clean competative trailer with removable tongue...got pics before the work was done..will get some 2morrow with the after pics..has a dominator pump in good shape got a stainless steel impeller place divertor and insert in nozzle..make me an offer got 2 much in it want to stop now..might have new carpet in it this weekend and new front bow seat wood replaced.if need a motor got a stock 454 gen 5 with peanut heads long blockill throw in..just finish the rest..6500 or make me an offer...

14
Engine Mechanical / Electrical / Re: COMPRESSION RATIO
« on: March 18, 2011, 08:32:28 am »
YEAH MY BOAT IS STILL IN THE SHOP I MAY GET IT BACK NEXT WEEK.THERE REDOIN THE HULL.SO I CAN LOAD THE MOTOR UP IN THE TRUCK AND HEAD UP THIS WEEKEND WHENEVER??
IT CONCERNS ME THAT MAYBE THIS MAY NOT BE WHAT I THINK.SOMEONE SAID TO CHECK IF IT HAS COPPER GASKETS AN NO IT DOESNT THERE BLUE LOOK LIKE FELPRO..SO I JUST WANT TO DOUBLE CHECK.SO IF THE GASKETS ARE ALL THAT NEED TO BE REPLACED THE ID RATHER PULL THE HEADS AND NO FOR SURE..  :thumbup:

15
Engine Mechanical / Electrical / COMPRESSION RATIO
« on: March 17, 2011, 11:28:38 pm »
IS THERE A WAY TO COMFIRM THE COMPRESSION RATIO WITHOUT TAKING THE HEADS OFF?????

16
Hulls / Re: 93 CP OPEN BOW
« on: March 14, 2011, 09:08:56 pm »
HEY THANKS FOR THE ADVISE GOT THE BOAT IN THE SHOP.AND BY THE WAY THE GUY HAS A COUPLE MOLDS 4 CP HULLS IF ANY ONE IS INTERESTED ANY COLOR YOU WANT $9500 BY THE TIME IM DONE THIS HULL WILL BE ABOUT THE SAME INVESTMENT.SO MUCH 4 A DEAL ON A USED BOAT :screwy: :screwy: :mad: :mad: OH YEAH THIS WILL HAVE AFTER PICS WHEN DONE..THE WHOLE FLOOR WILL BE REMOVED NEW BULKHEAD ADDED BULKHEADS AND EVERYTHING WILL BE REPAIRED SOLID AS A ROCK. :thumbup: :thumbup: :thumbup: :'( :beer: :beer: :beer: :beer: :thumbup: :thumbup:

17
Hulls / Re: 93 CP OPEN BOW
« on: March 14, 2011, 09:42:10 am »
WELL FOR THE PRICE I PAYED IM A LITTLE PISSED TO FIND THIS STUFF WRONG WITH IT.WELL I GUESS ILL FIND OUT FROM JOE AT JP WHAT I GOT MYSELF INTO.. :banghead: :banghead: :banghead:

18
Hulls / Re: 93 CP OPEN BOW
« on: March 14, 2011, 09:25:48 am »
SO AS YOU GUYS BEING MORE KNOWLEDGEABLE ABOUT THIS THAN I AM MY SOLUTION WAS TO GO TO HOME DEPOT GOT THE FIBERGLASS AND WAS ABOUT TO LAY STRIPS OVER EVERYTHING THEN ASKED A BUDDY TO GIVE ME A HAND AND HE ADVISED ME TO RETHINK THIS A LITTLE MORE BEFORE I GET STARTED.AGAIN YOU CAN SEE THAT THE BULKHEAD THAT SUPPORTS THE BOW HAS COME APRT EVERY WHERE THAT ITS BEEN CONNECTED TO THE BOTTOM MOLD.SO I DONT KNOW ENOUGH TO TELL IF THE GLASS WASNT STRONG ENOUGH OR IF NOT ENOUGH WAS USED OR WTF.IM THINKING OF DRAGGIN IT TO A BOAT SHOP AND GOT AN OVER THE PHONE GESTAMATE THAT IT MIGHT BE AROUND 2500.BUT CRAP THATS MONEY I CAN SPEND ON MY MOTOR..ANY SUGGESTIONS WOULD HELP ,ADVICE,EXC..THIS IS STARTING TO WORRY ME.. :mad: :mad: :mad: :'(

19
Hulls / Re: 93 CP OPEN BOW
« on: March 14, 2011, 09:17:22 am »
SUB FLOOR TO STRINGER DETACHED

20
Hulls / Re: 93 CP OPEN BOW
« on: March 14, 2011, 09:14:50 am »
MORE PICS

21
Hulls / Re: 93 CP OPEN BOW
« on: March 14, 2011, 09:12:29 am »
HERES SOME PICS

22
Hulls / Re: 93 CP OPEN BOW
« on: March 12, 2011, 10:04:55 pm »
do you have any suggestions of someone in san diego?

23
Hulls / 93 CP OPEN BOW
« on: March 12, 2011, 08:05:34 pm »
IN DISTRESS NOT A BOAT FIBER GLASS EXPERT BUT NO A LITTLE BIT.NEED SUM ADVISE ON HOW TO MAKE MY HULL STRONGER.I HAVE AN OPEN BOW GULLWING AND ITS FALLING APART I CAN GRAB THE BOW AND BASICALLY TWIST THE BOAT.IM TRYING TO FIGURE OUT HOW TO FIX THE PROBLEM.WHEN IT TWISTS I HAVE FOUND SEVERAL AREAS THAT NEED TO BE GLASSED OR REPAIRED.THE BULKHEAD IS SPLINTERED TO PIECES AND IM ASSUMING THAT IS THE MAJORITY OF THE PROBLEM.ILL TRY TO POST PICS BUT NEED SOME ADVISE ON HOW TO FIX..

24
Random Boat Parts For Sale / Re: BBC Polished Tunnel Ram & Edelbrock Performer for sale
« on: March 08, 2011, 09:29:43 pm »
still got the bbc highrise??

25
Engine Mechanical / Electrical / Re: 496 BLOWER MOTOR
« on: March 08, 2011, 09:01:43 pm »
 :screwy: :screwy:sh?t im a little slow.ok so 5.5 with the 871.now how much HP will that create?? and im sure this is a dump question how do i now what carb to run cfm wise???

Pages: [1] 2

Null

SMFPacks CMS 1.0.3 © 2022