Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - NEVER WRIEDT

Pages: 1 2 [3] 4
51
Engine Mechanical / Electrical / Re: Milkshake anyone?
« on: October 06, 2015, 08:16:23 AM »

I find them all the time. Do you really want headers?

I may have a line on some risers  (which are the same for small block as they are for a big block) and I need to call a friend in the great northwest to see if he has some logs and risers. I think he has some from a Red Line engine he blew up.

GT

Sent from my SCH-I545 using SoCal Jet Boats mobile app
I'm just tossing around the idea of headers. To be honest I'd rather stick to manifolds. The risers that you're talking about, will they fit those glenwood manifolds I have? What would be your opinion (logs, risers vs. headers) with my setup?
Thanks in advance!

52
Engine Mechanical / Electrical / Re: Milkshake anyone?
« on: October 06, 2015, 07:23:16 AM »
When I wrote that I forgot we're talking small block. You'll have to do some searching.
Yeah I'm finding out there ain't alot of marine headers for sbc just laying around in garages.

53
Engine Mechanical / Electrical / Re: Milkshake anyone?
« on: October 06, 2015, 06:13:02 AM »
I'm cool with the noise. Where can I find headers for a small block at $500.

54
Engine Mechanical / Electrical / Re: Milkshake anyone?
« on: October 06, 2015, 05:46:44 AM »
If I decided to go with an OT header, would i have reversion problems?

55
Engine Mechanical / Electrical / Re: Milkshake anyone?
« on: October 05, 2015, 09:40:55 PM »
$500?

56
Engine Mechanical / Electrical / Re: Milkshake anyone?
« on: October 05, 2015, 09:35:45 PM »
Not really
But I'd probably need to find something used

57
Engine Mechanical / Electrical / Re: Milkshake anyone?
« on: October 05, 2015, 09:22:20 PM »
I would prefer that

58
Engine Mechanical / Electrical / Re: Milkshake anyone?
« on: October 05, 2015, 08:27:02 PM »
What are some other options for an exhaust system that would fix this problem and help prevent reversion.

59
Engine Mechanical / Electrical / Re: Milkshake anyone?
« on: October 05, 2015, 09:56:42 AM »
I want to thank everyone for all the help. I  appreciate it👍

60
Engine Mechanical / Electrical / Re: Milkshake anyone?
« on: October 05, 2015, 09:21:29 AM »
Damn, I was afraid that's what it might be. Well, either that or the cam (comp xm270). My next question would be is there a different riser for those manifolds or am I looking at a whole new exhaust system. Thanks.

61
Engine Mechanical / Electrical / Re: Milkshake anyone?
« on: October 05, 2015, 07:13:28 AM »
I did have the boat beached for a lot of the day but the flappers are brand new. I did have this problem at the beginning of the season but replaced a leaky exhaust elbow gasket. I thought I had the problem solved because the trips between then and now have been trouble free.
Maybe its leaking from the other manifold now?! I'll tear into it a little when I get home.

62
Engine Mechanical / Electrical / Re: Milkshake anyone?
« on: October 04, 2015, 10:09:42 PM »
I'll pull the plugs tomorrow to find out

63
Engine Mechanical / Electrical / Re: Milkshake anyone?
« on: October 04, 2015, 09:44:41 PM »
Haven't drained it yet to know exactly but the level on the dipstick is about 3/8" past the full mark.

64
Engine Mechanical / Electrical / Re: Milkshake anyone?
« on: October 04, 2015, 09:34:58 PM »
The motor has not been modified since the beginning of the season

65
Engine Mechanical / Electrical / Re: Milkshake anyone?
« on: October 04, 2015, 09:26:37 PM »
Have not pulled the manifold

66
Engine Mechanical / Electrical / Re: Milkshake anyone?
« on: October 04, 2015, 09:25:43 PM »
About 9 lbs

67
The No Wake Zone / Re: New guy old boat
« on: October 04, 2015, 02:49:25 PM »
Congratulations on the boat

68
Engine Mechanical / Electrical / Milkshake anyone?
« on: October 04, 2015, 02:36:36 PM »
I just got back from the river and checked the oil. Not only is it well over full but it is very milky. BTW, the engine is a 383 sbc aluminum heads 750dp. I know this cannot be a condensation issue. I'm guessing a compression test is in the future but I'm also wondering if there is something else that might need be looked at first.
Thanks in advance for the advice.

69
Boat Showcase / Re: Lets See Your Rides
« on: October 01, 2015, 07:46:07 PM »
She's purdy

70
The No Wake Zone / Re: What did you do to your boat today?
« on: October 01, 2015, 07:44:37 PM »
Came home from work and found a tree on my boat.  Pissed off grab the  gain saw and hope no damage.  Thank god I pulled the motor last weekend. After I cut the tree free from the boat I was lucky no damage.  Time for a beer.


Sent from my iPhone using SoCal Jet Boats
Glad it all came out ok

71
Engine Mechanical / Electrical / Re: Stutter at wot
« on: October 01, 2015, 07:31:20 AM »
I've had a fuel filter cause this type of problem before, less than WOT ran fine.
Same here

72
The No Wake Zone / Re: What are you drinking today?
« on: September 29, 2015, 07:07:04 PM »
Bud light. Same as any other day

73
The No Wake Zone / Re: What did you do to your boat today?
« on: September 29, 2015, 07:02:07 PM »
Came out good

74
The No Wake Zone / Re: Another New Guy
« on: September 29, 2015, 12:20:34 PM »
Welcome :beer:

75
The No Wake Zone / Re: Newbie
« on: September 28, 2015, 07:01:09 PM »
Thanks again everyone

Pages: 1 2 [3] 4

SMFPacks CMS 1.0.3 © 2020