This boat is in great shape.
The olds probably just blew a gasket.
The Olds wasnt knocking or anything when it was pulled and has always ran great.
I'll even put the olds in it ;D
Lets move this thing!
-beerjet-
Bump Motor is fine $1000 for it all ;D
Lets go pick the motor up and get back together cuz Jason aint gonna do a fukin thing except look at it as he walks around it and try not to run into it in his garage.
Fuk it!
We'll get it running and use it as the Team Cold Beer Racing tow boat.
-beerjet-
A few more questions.... the gel what kinda shape is it in...any stress cracks... do ya have all the seats ??? and the engine cover ??? how are the stringers....did I leave sumpthin out ???
The gel is not perfect, and could use a buffing.
I cant remember if there are any defects in the gel.
The seating is what you see is what you get.
We didnt see anything obvious when we went poking around on the hull and stringers.
If your gonna do anything to the pump, I'd pull it or just run it .
The hull is really too heavy to be a hotrod anyways so the panther will be just fine.
You can pull the panther cover off but as soon as you do, you'll be scrambling to put it back over the hideous bare pump.
I think for a G, this is a smokin deal for a clean , solid cruiser.
The trailer is in great shape too and we all know metal flake is making a come back.
-beerjet-
Thanks for the info Omar 8) wasnt really lookin for a hotrod per se, kinda a cheap family boat project ::)
Perfect!
I think "Maddog" Andy has interior that is salvagable and like I said, not really anythink major to do. Buff it and some cosmetics.
Those buckets are wide as hell too :D
Some real BIG BOY seats .
-beerjet-