Set up for a mercruiser i/o... either alpha or bravo. Hull was purchased a little over a year ago as a project. Since then its had new 3/4" floors put in and a 2 1/4" thick transom put in. There are imco 13 gallon aluminum tanks with polished fuel fills and new USCG hoses and SS hose clamps. The carpet is new 20oz from boatcarpet.com and there are 3 access holes in the floor so you can get to the underside to bolt in your seats and for ventilation. Grab handles are staying on the boat as well as bow railing. Also including side panels which have cubbies and holes for 6 1/2" speakers. Including a 3 bow bimini top with solid rear poles, its blue but its better than getting skin cancer. Also included is back hatch and hinges which will clear a BBC with center rise exhaust.
no motor, no trailer, no upholstery. this is a solid project hull thats ready for someone to bolt their stuff into. gel has some rough spots from previous owner, holes are filled they just need to be sanded and polished up. or you could just paint the whole thing which is what i was planning to do. theres a set of seats for $400something right now for sale, slap your motor and a drive in it and go boating. also the floor is left open under the bow. my original plan was to go open bow, which doesnt use the floor in the front so you have more legroom... you could do that or put in a bulkhead and some speakers up under the bow if you wanted to as well.
Asking $500. Offers accepted, shoot me a PM. If you have something to trade shoot me a pm too.
when i first bought it, and what you'd be buying with some other boat on craiglist...
all new transom:
bilge is all white and clean (no motor/rigging included with sale)
heres the boat handling some decent harbor chop with no problems. was probably doing 40 at the time. its a great riding hull.
