SoCal Jet Boats

Classifieds => Project Boats For Sale => Topic started by: Brad @ SCJB on May 11, 2009, 07:27:26 AM

Title: FS: Hallett Sprint
Post by: Brad @ SCJB on May 11, 2009, 07:27:26 AM
I picked up this boat as a project boat to make it into a circle racer to race in CompJet. I purchased another boat (cruiser) instead and now have no time/money to finish this one.

I have zero paperwork on the hull or trailer.

its a full stringer boat. bottom is laid up with recesses in it for a cav plate setup. it comes with the static trim tabs.....its set up for a jacuzzi pump and has a jacuzzi intake in it....its a very solid hull, just needs some TLC and love cosmetically. it comes with the tandem axle trailer too

come pick it up....$300 cash and its yours.

Note - it does not come with the jacuzzi pump in the picture - I am selling that seperatly for $300 (minus place diverter nozzle)....come pick them both up for $500

[attachimg=1]

[attachimg=2]

[attachimg=3]

[attachimg=4]

[attachimg=5]

[attachimg=6]
Title: Re: FS: Hallett Sprint
Post by: Brad @ SCJB on May 13, 2009, 09:46:16 PM
FREE

just get it out of my fockin yard.
Title: Re: FS: Hallett Sprint
Post by: IRRebel on May 13, 2009, 09:51:34 PM
Brad, have Jeremy bring it to me when he comes down to borrow my Blue Meaney on Monday, I'll find a place for it, lol

Ray
Title: Re: FS: Hallett Sprint
Post by: Brad @ SCJB on May 13, 2009, 10:00:53 PM
Brad, have Jeremy bring it to me when he comes down to borrow my Blue Meaney on Monday, I'll find a place for it, lol

Ray

i need it gone before friday afternoon. i dropped the price on craigsshit ....hopefully it will go.
Title: Re: FS: Hallett Sprint
Post by: crewchief22 on May 13, 2009, 10:11:15 PM
will the tires hold air?
Title: Re: FS: Hallett Sprint
Post by: Brad @ SCJB on May 13, 2009, 10:13:31 PM
will the tires hold air?

all hold air....one has a slow leak over 24 hours to go flat....a can of flix-a-flat and youre set

the trailer has some harbor frieght magnetic lights on it....no reg on the trailer.
Title: Re: FS: Hallett Sprint
Post by: crewchief22 on May 13, 2009, 10:14:04 PM
For that price I could find a place for it (I need the Jacuzzi intake).  The soonest I could get it would be Sat AM.
Title: Re: FS: Hallett Sprint
Post by: IRRebel on May 13, 2009, 10:16:33 PM
Lol, working on it too Keith, BUT, got a JG for it, so if you want the intake you can have it if this works out!

Ray
Title: Re: FS: Hallett Sprint
Post by: Brad @ SCJB on May 13, 2009, 10:33:54 PM
soo...how about this.

ill pull the intake and give it to crewchief

ill convince the wife-to-be to let me just stash the boat/trailer on the driveway till monday. its in the backyard now and its an eye sore...check with oc2vegas if its cool for him to tow it out to you monday.
Title: Re: FS: Hallett Sprint
Post by: crewchief22 on May 13, 2009, 10:56:04 PM
Works for me.  But does Ray really need another hull?  :screwy:
Title: Re: FS: Hallett Sprint
Post by: HDriderTH on May 13, 2009, 11:17:15 PM
ya got my yard till monday if ya need it.......
Title: Re: FS: Hallett Sprint
Post by: OC2Vegas on May 14, 2009, 08:45:09 AM
got no problem dragging it out to you ray, least i can do for you loaning the boat for the cause!

only thing, if its got no registration on it...does someone have a registered trailer that i can borrow the plate off of for that i dont have any trouble with the coppers and the bridge police!
Title: Re: FS: Hallett Sprint
Post by: GlassCutter on May 14, 2009, 08:58:22 AM
ill convince the wife-to-be to let me just stash the boat/trailer on the driveway till monday. its in the backyard now and its an eye sore...check with oc2vegas if its cool for him to tow it out to you monday.

And so it begins . . .    does anybody have some pants Brad can borrow,  seems as though the wife to be has his.   >:D






Just kidding Brad, things pretty much work the same around my place   :banghead:
Title: Re: FS: Hallett Sprint
Post by: Brad @ SCJB on May 14, 2009, 09:06:05 AM
honestly, im sick of looking at it too. its not just her.....its visible from the kitchen.

a guy from craigslist just came by.....told him if he takes it all by tomorrow afternoon...$300 for pump boat and trailer.

sorry guys, money talks. ill let ya know if he comes through....otherwise its headed to pheonix monday.

jerm...ill throw the southwind's plate on there, just make sure you get it back to me before tuesday morning for the free flatbottom excursion.
Title: Re: FS: Hallett Sprint
Post by: GlassCutter on May 14, 2009, 09:11:24 AM
Good luck with the sale.  You probably shouldn't have let him leave tho . . .
Title: Re: FS: Hallett Sprint
Post by: Brad @ SCJB on May 14, 2009, 10:01:04 AM
Good luck with the sale.  You probably shouldn't have let him leave tho . . .

he is a mobil detailer and was already towing a trailer.....he wants it, just was shy about the no reg. NV is a bitch when it comes to stuff like that.
Title: Re: FS: Hallett Sprint
Post by: OC2Vegas on May 14, 2009, 12:20:49 PM
If you dont sell it and I drag it to Ray on Monday, I will drop your plate of on my way back into Vegas.

Ray, if thats what happens, dont forget to bring a plate with you to tow it home.
Title: Re: FS: Hallett Sprint
Post by: IRRebel on May 14, 2009, 01:56:36 PM
Not a problem, Hoping Brad sells it anyway, he could use the money rather than giving it away. Then me figuring out the perplexing problem of storing it, but for free, I'll work it out if it comes to that (Maybe leave it in the pool, lol)

I need this like I need cancer, but.......... :screwy:

Ray
Title: Re: FS: Hallett Sprint
Post by: beerjet on May 14, 2009, 07:58:10 PM
its visible from the kitchen.
Is it making faces at you when your washing the dishes or what  :sly:

Whay all the hate  ???

-beerjet-
Title: Re: FS: Hallett Sprint
Post by: OC2Vegas on May 14, 2009, 08:07:36 PM
Is it making faces at you when your washing the dishes or what  :sly:

Whay all the hate  ???

-beerjet-

Because its not pretty and SHE said get rid of it!  ;)

JK Brad!
Title: Re: FS: Hallett Sprint
Post by: SnoC653 on May 14, 2009, 09:29:02 PM
You're right that does look identical to the eliminator.   Shame I'm too far away.  It would make R&D a lot easier with a second matching hull.   Does the Hallet have the spoon in the bottom like the eliminator? 
Title: Re: FS: Hallett Sprint
Post by: OC2Vegas on May 17, 2009, 05:28:23 PM
am I towing it to Parker tomorrow or did it sell?
Title: Re: FS: Hallett Sprint
Post by: Brad @ SCJB on May 17, 2009, 05:31:00 PM
am I towing it to Parker tomorrow or did it sell?

nope, its still sitting in my back yard. what time will you be by?
Title: Re: FS: Hallett Sprint
Post by: OC2Vegas on May 17, 2009, 05:33:44 PM
nope, its still sitting in my back yard. what time will you be by?

Figure I need to be pulling out of your driveway by 2pm at the latest. You going to be there around 1-1:30pm? PM your address.

Call when I am on my way!
Title: Re: FS: Hallett Sprint
Post by: Brad @ SCJB on May 18, 2009, 01:40:40 PM
its gone....on its way to phoenix via parker

ray, i left the intake in it....if/when you pull it, send it over to keith.
Title: Re: FS: Hallett Sprint
Post by: IRRebel on May 18, 2009, 09:35:50 PM
Will do, put the fugly thing beside my house to see my neighbors scratch their heads, lol.

'm off tomorrow, I'll see if i can get it off for Keith. Crewcheif, PM me your addie and I'll just ship it out to you.

Thanks Brad, lol kids are atoked to see it musta been yellow in it's former life.

Ray
Title: Re: FS: Hallett Sprint
Post by: Brad @ SCJB on May 18, 2009, 09:58:05 PM
no, thats just some shitty sun faded resin they used to cap it...you can see where it was capped and the resin (no glass) is cracking all the way through.

that boat has a ton of potential. i was sad to let it go. even though i didnt loose money on it, i had a very percise plan for it...but never got to do it....but the reality of it all, a project boat like that will cost 10g's easy when all is said and done.....and turn key boats...NICE boats...are goin for 4g's all day on craigslist.....thus why i ended up with the southwind.

so now heres the kicker...i got FOUR (4) calls for this damn thing NOT MORE then 20 minutes after oc2vegas left!!  :mad: :mad: :mad:

its just the way shit goes......  ::)
Title: Re: FS: Hallett Sprint
Post by: IRRebel on May 18, 2009, 10:01:20 PM
Then re post it on PHX Craigs list and Tucson, After I get Keiths intake, lol Hate to see you loose money on it like that.

Ray
Title: Re: FS: Hallett Sprint
Post by: Brad @ SCJB on May 18, 2009, 10:18:54 PM
Then re post it on PHX Craigs list and Tucson, After I get Keiths intake, lol Hate to see you loose money on it like that.

Ray

i havent lost money on it.....i spent $700 on it (yeah, way too much for the times)...but i got $350 for that jacuzzi place diverter...and i still have the jacuzzi pump..and a nicson floor mount foot pedal.....and a bunch of other useless hardware i pulled out of it. figure if i can get $200 or so for the jacuzzi pump....im close enough to call it even in my book

those 4 calls were all for the trailer only....they were going to dispose of the hull.....which i would hate to happen. its fuggin ugly as sin, but is still solid as an ox and has a ton of potential to live another 30+ years.

but its yours now, do as you please....restore it...junk it...make a flower garden out of it....what ever you do, just have fun doin it.

Title: Re: FS: Hallett Sprint
Post by: IRRebel on May 18, 2009, 10:26:15 PM
i havent lost money on it.....i spent $700 on it (yeah, way too much for the times)...but i got $350 for that jacuzzi place diverter...and i still have the jacuzzi pump..and a nicson floor mount foot pedal.....and a bunch of other useless hardware i pulled out of it. figure if i can get $200 or so for the jacuzzi pump....im close enough to call it even in my book

those 4 calls were all for the trailer only....they were going to dispose of the hull.....which i would hate to happen. its fuggin ugly as sin, but is still solid as an ox and has a ton of potential to live another 30+ years.

but its yours now, do as you please....restore it...junk it...make a flower garden out of it....what ever you do, just have fun doin it.



Lol, nope, just spent about 10 or 20 minutes out there drinking a beer and processing what I think it could be. It's gonna get built. Just trying to wrap my lil brain around it right now.

And I was kidding about the Fugly part, I see the potential in it. Very desireable hull.

Ray

Anybody runnin a Viper V-10 in a jet boat yet????
Title: Re: FS: Hallett Sprint
Post by: GT Jets on May 18, 2009, 10:44:37 PM
Lol, nope, just spent about 10 or 20 minutes out there drinking a beer and processing what I think it could be. It's gonna get built. Just trying to wrap my lil brain around it right now.

And I was kidding about the Fugly part, I see the potential in it. Very desireable hull.

Ray

Anybody runnin a Viper V-10 in a jet boat yet????

Yep.           :sly:  I'll find the pics, if memory serves it was in a twin motor offshore dealio.

GT
Title: Re: FS: Hallett Sprint
Post by: IRRebel on May 18, 2009, 10:50:23 PM
Lol thanx Glenn. Just one of my thoughts. This boat has a LOT of open space for motor as the cockpit area is so far forward. Different than anything I've ever looked at, and NOT a cruiser hull, very shallow V (Less than the moo or the Saguaro). Almost flatbottom like.

But you guys know that, and there's several of them on here I know.

Ray
Title: Re: FS: Hallett Sprint
Post by: OC2Vegas on May 18, 2009, 11:31:02 PM
And its already got a name:

"High Voltage" is already painted on the side
Title: Re: FS: Hallett Sprint
Post by: Brad @ SCJB on May 18, 2009, 11:37:46 PM
this hull is VERY identical to the eliminator sprint (like propless's boat...snoc has one too)....i wouldnt doubt they are splashed relatives.

i never got any history on the hallett baron sprint hull...dont know if they were worth a damn in a straight line or in a turn....if they were even competitive....or even ever used for a racing application. i know busby said he took proppy's elim up to 125 in a blown alchy deal.....but was also told he was on the vurge of killing himself doing it lol.

my plan was to set it up as a single center stear application....convert to berk setup....and put a cav setup on those static tabs on the back....i went as far as to purchase all of the cav hardware (actually 2 sets from 2 different boats (v and flat bottom))...all the internal rigging, etc.... but i have different plans for that hardware now  >:D
Title: Re: FS: Hallett Sprint
Post by: IRRebel on May 18, 2009, 11:45:23 PM
That it does, lol. There's another thread saved!

I'm well into a twelve pack of Corona now, and the thing is growing on it's own in my lil brain. My first thoughts were on the ride home, lets' do this on the cheap. I mean, the boat was free, so let's see how many free and dirt cheap parts we can use to put it together. Then paint it to be the SoCalJetBoats flagship (Which I can get done free).

After looking closely at the hull, no way can I do this in good concience. The thing was made to run, obviously. And run it will. I mighta went a lil nuts on the Moo, but what's in my mind right now borders on insane, lol

Ray

It's goin Berk for sure, researching Tom's old posts right now for how he went about that. I'm also thinking setback.

All this is just thinking out loud, mind you. Don't know much about Cav's though.  Looks like a runner either way.
SMFPacks CMS 1.0.3 © 2026