SoCal Jet Boats
Classifieds => Project Boats For Sale => Topic started by: lbhsbz on March 02, 2011, 07:50:12 PM
-
Tired of being broke.....time to part with it.
Check out my "project" thread for more pictures
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2F184.72.239.143%2Fmu%2Fad3c425a-0f71-8e37.jpg&hash=eb21cd28dd56c195d6d0b4b68acdba0f63dfd8f4)
I've got a fresh blueprinted dominator pump, properly built 496 shortblock, diverter, droop, strait snoot, dominator carb and dart manifold, Edelbrock stainless headers, etc...
Will sell with everything I've got for it or sell everything separately.
Make offer I guess...dunno what to ask in today's market
-
bump....willing to split it up...
-
What are the specs on the short block
-
.060" over srp 18cc dome pistons, scat h-beam rods, rpm 4340 crank (was skeptical, but this is a very noce piece) deck height is at zero, mains set at .003-.0033, rear main is at .004, rods ar .0022...gotta find my notes to see where i set the rings and thrust. 4 bolt mk IV block, arp main studs, arp head studs, .650 lift bullitt solid roller, isky lifters, std length t-chain (and its tight) clevite bearings, rpm balancer, b&d 10qt oil pan, melling hd oil pump.
i've also got set of dart pro-1 310cc aluminum heads with brand new valve seats installed. i've got new valves and all the pieces, just need a valve job and they're ready to go.
dart single plane intake and a holley 1050 that i just went through, as well as an msd crank trigger ignition setup with the low pro crab cap distributor, 6al box, and a set of $950 edelbrock stainless upswept dry headers.....
make offers
-
Pump is sold, hull is pending, all the go fast stuff is posted in the engines section.