'72 Rogers

« **Reply #50 on:** January 20, 2017, 09:17:04 AM »

It's not a star washer. I didn't realize the water mark covered the washers in the pic.

Sent from my iPhone using SoCal Jet Boats

« **Reply #51 on:** January 20, 2017, 12:40:31 PM »

Here's a small pro tip. If you're looking for a nice thru transom seal then go to your local electrical supply store instead of spending $35+ with a retailer like CP or settling for a cheesy version. I picked this up from American Electrical Supply in Corona for under $5. It's called a cable gland or strain relief. This one is made by Appleton and they call it a cord grip.

I decided to run the diverter cable through the TA rather than drilling an additional hole in the fiberglass.

Sent from my iPhone using SoCal Jet Boats

« **Reply #52 on:** January 20, 2017, 09:25:10 PM »

Quote from: JordanDangerfield on January 20, 2017, 12:40:31 PM

Here's a small pro tip. If you're looking for a nice thru transom seal then go to your local electrical supply store instead of spending $35+ with a retailer like CP or settling for a cheesy version. I picked this up from American Electrical Supply in Corona for under $5. It's called a cable gland or strain relief. This one is made by Appleton and they cal it a cord grip.

I decided to run the diverter cable through the TA rather than drilling an additional hole in the fiberglass.

Sent from my iPhone using SoCal Jet Boats

Yeah. McMaster Carr carries them too. They also carry a nice billet looking one that's "low profile submersible"

The only down side for me was the 75.00 1/2npt drill and tap

« **Reply #53 on:** January 21, 2017, 07:36:02 AM »

Here's my solution to the cable packer washers. M10 flat washers are the perfect size. I just needed to clip it in half to bend it around the cable.

Sent from my iPhone using SoCal Jet Boats

« **Reply #54 on:** January 23, 2017, 10:09:31 AM »

Waiting on this rain to clear up for a shakedown run!

Sent from my iPhone using SoCal Jet Boats

« **Reply #55 on:** January 23, 2017, 10:25:51 AM »

Quote from: JordanDangerfield on January 23, 2017, 10:09:31 AM

Waiting on this rain to clear up for a shakedown run!

Sent from my iPhone using SoCal Jet Boats

. Looks good give us a update on Elsinore when you do your shake down.

Sent from my iPhone using SoCal Jet Boats

« **Reply #56 on:** January 23, 2017, 10:33:48 AM »

Quote from: jimpen on January 23, 2017, 10:25:51 AM

. Looks good give us a update on Elsinore when you do your shake down.

Sent from my iPhone using SoCal Jet Boats

The plan was the head out to Perris, but with all this rain I want to give Elsinore a shot. This last week probably added another foot.

Sent from my iPhone using SoCal Jet Boats

« **Reply #57 on:** January 23, 2017, 10:41:42 AM »

Quote from: JordanDangerfield on January 23, 2017, 10:09:31 AM

Waiting on this rain to clear up for a shakedown run!

Sent from my iPhone using SoCal Jet Boats

is that primer above the transom cover?

Might come off with some reducer or somehting

« **Reply #58 on:** January 23, 2017, 11:10:24 AM »

Quote from: steves86ta on January 23, 2017, 10:41:42 AM

is that primer above the transom cover?

Might come off with some reducer or somehting

It is. There's another spot above it to the left too. I'll try it out.

Sent from my iPhone using SoCal Jet Boats

« **Reply #59 on:** January 28, 2017, 02:45:17 PM »

I got her out in the sun today.

Sent from my iPhone using SoCal Jet Boats

JordanDangerfield

Re: '72 Rogers

JordanDangerfield

'72 Rogers

steves86ta

Re: '72 Rogers

JordanDangerfield

Re: '72 Rogers

JordanDangerfield

Re: '72 Rogers

jimpen

Re: '72 Rogers

JordanDangerfield

Re: '72 Rogers

steves86ta

Re: '72 Rogers

JordanDangerfield

Re: '72 Rogers

JordanDangerfield

Re: '72 Rogers