'79 Nordic bubble deck

« **Reply #125 on:** March 26, 2015, 09:55:25 AM »

The big piece is what costs so much. I used four smaller squares and did one on each corner. I cut my aluminum with a router and went slow

Sent from my iPhone using SoCal Jet Boats

« **Reply #126 on:** March 26, 2015, 09:56:30 AM »

That's everything. I cheated a little because a member on her (Justelectric) hooked it up on the corner blocks.

Sent from my iPhone using SoCal Jet Boats

« **Reply #127 on:** March 26, 2015, 10:02:53 AM »

Quote from: 74hondo on March 26, 2015, 09:56:30 AM

That's everything. I cheated a little because a member on her (Justelectric) hooked it up on the corner blocks.

Sent from my iPhone using SoCal Jet Boats

heck Ya made out on that! And Justin is always good help! I need your alluminum guys number!!

"RTCP"

« **Reply #128 on:** March 26, 2015, 10:08:09 AM »

I got everything except the backing plates off of eBay. The back plates 1/4"- 6061 I got from a local metal place here is Hesperia.

Sent from my iPhone using SoCal Jet Boats

« **Reply #129 on:** March 26, 2015, 10:08:50 AM »

You can see the front plates here

Sent from my iPhone using SoCal Jet Boats

« **Reply #130 on:** March 26, 2015, 10:45:44 AM »

Quote from: capogniracing on March 26, 2015, 10:02:53 AM

heck Ya made out on that! And Justin is always good help! I need your alluminum guys number!!

"RTCP"

You need feet for the plates? Think I have 4 and have some 1/4" aluminum plate

« **Reply #131 on:** March 26, 2015, 10:47:40 AM »

Quote from: H20Nut21Bahner on March 26, 2015, 10:45:44 AM

You need feet for the plates? Think I have 4 and have some 1/4" aluminum plate

i can get 1/4, just seems impossible to get a small section of 3/8

"RTCP"

« **Reply #132 on:** March 26, 2015, 11:18:41 AM »

How small are you talking?

Sent from my iPhone using SoCal Jet Boats

« **Reply #133 on:** March 26, 2015, 12:13:21 PM »

Thanks for all the advise guys. I am going to be talking to the guys at Bostick probably today, I will talk to them about it. Do you guy think it's a good idea to go with a rail kit? Do they build loaders at Bostick?

Sent from my garage drinking a cold PBR

« **Reply #134 on:** March 26, 2015, 01:15:58 PM »

Quote from: Mrblueeyesnick on March 26, 2015, 12:13:21 PM

Thanks for all the advise guys. I am going to be talking to the guys at Bostick probably today, I will talk to them about it. Do you guy think it's a good idea to go with a rail kit? Do they build loaders at Bostick?

Sent from my garage drinking a cold PBR Yes I like rail kits it makes life easier and just a better mounting system. Not real sure about the loader but I know he will be able to give you help with the loader you need for horsepower and boat.

« **Reply #135 on:** March 26, 2015, 01:17:12 PM »

Quote from: jimpen on March 26, 2015, 01:15:58 PM

Thank Jim I will give him a call

Sent from my garage drinking a cold PBR

« **Reply #136 on:** March 27, 2015, 11:28:06 PM »

While I was taking a break from sanding I put my scjb sticker on the truck. It's about damn time. I have had it for over 6 months and finally decided that's where it needed to be.

Sent from my garage drinking a cold PBR

« **Reply #137 on:** March 30, 2015, 04:11:59 PM »

Well guys and gals, I had my shoulder surgery today. Everything went good, so I am on the mend.

Sent from my garage drinking a cold PBR

« **Reply #138 on:** March 30, 2015, 05:13:25 PM »

Glad to hear

Sent from my iPhone using SoCal Jet Boats

« **Reply #139 on:** March 30, 2015, 11:11:29 PM »

heres to a speedy recovery

« **Reply #140 on:** March 30, 2015, 11:30:01 PM »

Thanks guys

Sent from my garage drinking a cold PBR

« **Reply #141 on:** April 07, 2015, 02:16:10 AM »

Well yesterday I took the rest of the parts for my engine down to the guys at Bostick. They showed me the progress that they had made on all the machine work. My heads looked brand new. All they have left to do is the bore on it and it's ready to be put back together. Oh yeah!!! I also took my jet down there and their going to get started on it as well. Should have it all done by the end of this month the beginning of next month. Can't wait to have the new engine and jet.

Sent from my garage drinking a cold PBR

« **Reply #142 on:** April 07, 2015, 07:57:39 AM »

Those guys do some nice work!

Sent from my iPhone using SoCal Jet Boats

« **Reply #143 on:** April 15, 2015, 12:42:46 PM »

Finished the trailer as far as I could go. Got the wheels back on and off the jack stands. I ordered all the lights and wiring. Should have it all by the middle of next week. Also talked to James at bostick and it sounds like my engine might be done ahead of schedule. Can't wait to get it and my jet back.

Sent from my garage drinking a cold PBR

« **Reply #144 on:** April 15, 2015, 01:35:04 PM »

Quote from: Mrblueeyesnick on April 15, 2015, 12:42:46 PM

Finished the trailer as far as I could go. Got the wheels back on and off the jack stands. I ordered all the lights and wiring. Should have it all by the middle of next week. Also talked to James at bostick and it sounds like my engine might be done ahead of schedule. Can't wait to get it and my jet back.

Sent from my garage drinking a cold PBR

Love the color! 👍🏻

Sent from my iPhone using SoCal Jet Boats

« **Reply #145 on:** April 15, 2015, 01:36:41 PM »

Quote from: Frazier74 on April 15, 2015, 01:35:04 PM

Love the color! 👍🏻

Sent from my iPhone using SoCal Jet Boats

Thanks. It took a while to get it like that but it worked out

Sent from my garage drinking a cold PBR

« **Reply #146 on:** April 15, 2015, 01:39:52 PM »

Nice job on it, it was worth taking your time! I'm leaning towards red myself (Match my truck) ... But haven't even started anything yet. 😢

Sent from my iPhone using SoCal Jet Boats

« **Reply #147 on:** April 15, 2015, 01:56:57 PM »

Quote from: Frazier74 on April 15, 2015, 01:39:52 PM

Nice job on it, it was worth taking your time! I'm leaning towards red myself (Match my truck) ... But haven't even started anything yet. 😢

Sent from my iPhone using SoCal Jet Boats

I went red to match the boat. Once I get the boat painted the trailer will change. But for now it matches pretty well.

Sent from my garage drinking a cold PBR

« **Reply #148 on:** April 15, 2015, 01:59:56 PM »

Quote from: Mrblueeyesnick on April 15, 2015, 01:56:57 PM

I went red to match the boat. Once I get the boat painted the trailer will change. But for now it matches pretty well.

Sent from my garage drinking a cold PBR

Wow! You did a great job matching it, L👀KS very close to the color 👍🏻

At first wasn't a huge fan of Red but the more I see it on other hulls the more I want red and plus I won't have to change trucks lol!! 👊🏻

Sent from my iPhone using SoCal Jet Boats

« **Reply #149 on:** April 15, 2015, 09:32:15 PM »

Quote from: Mrblueeyesnick on April 15, 2015, 12:42:46 PM

Finished the trailer as far as I could go. Got the wheels back on and off the jack stands. I ordered all the lights and wiring. Should have it all by the middle of next week. Also talked to James at bostick and it sounds like my engine might be done ahead of schedule. Can't wait to get it and my jet back.

Sent from my garage drinking a cold PBR

Looks great! Where'd u order the lights from?

Sent from my iPad using SoCalJetBoats

74hondo

74hondo

capogniracing

74hondo

74hondo

H20Nut21Bahner

capogniracing

74hondo

Mrblueeyesnick

jimpen

Mrblueeyesnick

Mrblueeyesnick

Mrblueeyesnick

74hondo

JARVIS

Mrblueeyesnick

Mrblueeyesnick

sevans01

Mrblueeyesnick

Frazier74

Mrblueeyesnick

Frazier74

Mrblueeyesnick

Frazier74

Bunger