'79 Nordic bubble deck

« **Reply #175 on:** May 06, 2015, 03:50:06 PM »

Quote from: Mrblueeyesnick on May 06, 2015, 03:48:08 PM

Got a video from Bostick today, it's alive!!! Here is the video on YouTube

Sent from my garage drinking a cold PBR

Video is private brotha

« **Reply #176 on:** May 06, 2015, 03:50:32 PM »

I'm working on it sorry guys

Sent from my garage drinking a cold PBR

« **Reply #177 on:** May 06, 2015, 03:52:36 PM »

Here we go

Sent from my garage drinking a cold PBR

« **Reply #178 on:** May 06, 2015, 05:07:24 PM »

Sounds good👍🏼

Sent from my iPhone using SoCal Jet Boats

« **Reply #179 on:** May 06, 2015, 10:55:18 PM »

sounds like its gonna kick ass and take names later....maybe.
throttle response seems crisp, very nice.

« **Reply #180 on:** May 06, 2015, 11:25:09 PM »

Quote from: JARVIS on May 06, 2015, 10:55:18 PM

sounds like its gonna kick ass and take names later....maybe.
throttle response seems crisp, very nice.

I don't know about kickin ass but it will be a lot of fun that's for sure. Lol

Sent from my garage drinking a cold PBR

« **Reply #181 on:** May 07, 2015, 12:00:39 AM »

enjoy!

« **Reply #182 on:** May 07, 2015, 12:56:03 AM »

Quote from: JARVIS on May 07, 2015, 12:00:39 AM

enjoy!

Trust me I will lol, can't wait to get it back🍻

Sent from my garage drinking a cold PBR

« **Reply #183 on:** May 07, 2015, 01:10:56 AM »

I was looking on fb and this is what Bostick wrote about what was done to my engine.

Sent from my garage drinking a cold PBR

« **Reply #184 on:** May 07, 2015, 09:13:47 PM »

The engine and the jet is complete. I will be heading down to Bostick to pick them up in the next couple of days. I can see the light at the end of the tunnel!!! Lol

Sent from my garage drinking a cold PBR

« **Reply #185 on:** May 07, 2015, 09:14:53 PM »

Quote from: Mrblueeyesnick on May 07, 2015, 09:13:47 PM

The engine and the jet is complete. I will be heading down to Bostick to pick them up in the next couple of days. I can see the light at the end of the tunnel!!! Lol

Sent from my garage drinking a cold PBR

Forgot pictures of the jet

Sent from my garage drinking a cold PBR

« **Reply #186 on:** May 08, 2015, 05:53:08 PM »

Stringers set!!! Now we play the waiting game.

Sent from my garage drinking a cold PBR

« **Reply #187 on:** May 08, 2015, 06:45:06 PM »

Nice!

Walk us thru how you bedded the stringers please.

Also, hard to tell from pic, are the corners of wood rounded over? If not, may wanna consider it as it will help glass lay over top of stringer with little to no air pockets. Like a 1/2" round over bit on a router should do fine.

« **Reply #188 on:** May 08, 2015, 07:05:09 PM »

Quote from: JARVIS on May 08, 2015, 06:45:06 PM

Nice!

Walk us thru how you bedded the stringers please.

Also, hard to tell from pic, are the corners of wood rounded over? If not, may wanna consider it as it will help glass lay over top of stringer with little to no air pockets. Like a 1/2" round over bit on a router should do fine.

We basically laid a 2" strip of csm and put resin over it and then put a 6" strip over that, set the stringers in and added a bunch of weight on top of them. I haven't rounded the corners yet but as soon as the resin is setup we will get in and do some more sanding.

Sent from my garage drinking a cold PBR

« **Reply #189 on:** May 08, 2015, 07:42:09 PM »

A router would be much easier and give consistent results. Meaning you'll know it the same radius the whole way down. A rotozip will work just fine here....smaller than a full size router.

« **Reply #190 on:** May 08, 2015, 08:33:23 PM »

Quote from: JARVIS on May 08, 2015, 07:42:09 PM

A router would be much easier and give consistent results. Meaning you'll know it the same radius the whole way down. A rotozip will work just fine here....smaller than a full size router.

It would probably would work better, I just don't have a router. Maybe I will hit up a few guys to see if they have one.

Sent from my garage drinking a cold PBR

« **Reply #191 on:** May 09, 2015, 08:26:35 AM »

I have a router you can borrow if you live close enough. I'm in Hesperia. You'll need to buy a different but probably. I only have a 3/8 round over.

Sent from my iPhone using SoCal Jet Boats

« **Reply #192 on:** May 09, 2015, 08:26:51 AM »

Bit*

Sent from my iPhone using SoCal Jet Boats

« **Reply #193 on:** May 09, 2015, 06:54:38 PM »

3/8 round over bit should work....its better than 1/8 or so (maybe less) that comes on the wood from mill....

« **Reply #194 on:** May 09, 2015, 09:15:31 PM »

He's welcome to borrow it. I'm leaving the country though, be back on the 19th.

Sent from my iPhone using SoCal Jet Boats

« **Reply #195 on:** May 09, 2015, 09:28:55 PM »

Quote from: 74hondo on May 09, 2015, 08:26:35 AM

I have a router you can borrow if you live close enough. I'm in Hesperia. You'll need to buy a different but probably. I only have a 3/8 round over.

Sent from my iPhone using SoCal Jet Boats

I would love to borrow it but hesperia is about an hour and 15 mins away. I should be able to get one from one of my neighbors

Sent from my garage drinking a cold PBR

« **Reply #196 on:** May 09, 2015, 09:58:42 PM »

Okay sounds good. Either way rounding it will help.

Sent from my iPhone using SoCal Jet Boats

« **Reply #197 on:** May 09, 2015, 10:46:04 PM »

Quote from: 74hondo on May 09, 2015, 09:58:42 PM

Okay sounds good. Either way rounding it will help.

Sent from my iPhone using SoCal Jet Boats

Yeah I will either get one from someone or I will break down and buy one, I already have to replace my 30+ year old circular saw that we burnt up cutting the angle on the stringers.

Sent from my garage drinking a cold PBR

« **Reply #198 on:** May 09, 2015, 10:48:22 PM »

While I was waiting for the stringers I went ahead and put my fuel fill and bimini hardware on.

Sent from my garage drinking a cold PBR

« **Reply #199 on:** May 10, 2015, 08:17:27 AM »

Quote from: Mrblueeyesnick on May 09, 2015, 10:48:22 PM

While I was waiting for the stringers I went ahead and put my fuel fill and bimini hardware on.

Sent from my garage drinking a cold PBR

nice work man keep it up!

steves86ta

Mrblueeyesnick

Mrblueeyesnick

sevans01

JARVIS

Mrblueeyesnick

JARVIS

Mrblueeyesnick

Mrblueeyesnick

Mrblueeyesnick

Mrblueeyesnick

Mrblueeyesnick

JARVIS

Mrblueeyesnick

JARVIS

Mrblueeyesnick

74hondo

74hondo

JARVIS

74hondo

Mrblueeyesnick

74hondo

Mrblueeyesnick

Mrblueeyesnick

che77y