SoCal Jet Boats

Tech Talk => Projects => Topic started by: jet boat performance on March 05, 2008, 08:59:40 PM

Title: 16' Tahiti ?
Post by: jet boat performance on March 05, 2008, 08:59:40 PM
Bought my first Jet boat new 1976 ,A 19' Miller Bubble deck then in 78' with the first youngin on the way I sold the Miller and was boatless for a few years . I the Mid 80's I found a cheap little "fixer upper' and was "bitten" by the Jet boat bug again  Its was a very fast (ill handling) little boat that had a 455 Olds and Berkeley jet but with an outboard type "splash well", anyhow  it served its purpose and we had a lot of good times  with it .When Josh was little we used to put a rear seat cushion between the front buckets and plunk him down between the front seats for the speed runs (he could barely see over the dash) . The strange thing was I alway thought/assumed it was a "Jury rigged' outboard "conversion" to a jet Until today !This is a boat I bought this afternoon check it out ! Tom
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi147.photobucket.com%2Falbums%2Fr319%2Fjetboatperformance%2Fkidstahiti.jpg&hash=97a3f943e7e891e6dd7ad1d058f517ebf667cf21)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi147.photobucket.com%2Falbums%2Fr319%2Fjetboatperformance%2Fblue%2520tahiti%2FDSC09679.jpg&hash=50e959a7d9fdb9d0d505d84e095d81398bdb3a10)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi147.photobucket.com%2Falbums%2Fr319%2Fjetboatperformance%2Fblue%2520tahiti%2FDSC09677.jpg&hash=dd46a07d7924bc464a6370dbc574ec8a7e2b4d7e)
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi147.photobucket.com%2Falbums%2Fr319%2Fjetboatperformance%2Fblue%2520tahiti%2FDSC09678.jpg&hash=03e0d232d956d2ed20c6fb79a05489d3d543e20f)
Title: Re: 16' Tahiti ?
Post by: propless on March 06, 2008, 01:43:09 AM
Tom
 Does the one you just got have an actual splash well or is it a big hole covered with that pad ?   It realy seams like thay did some strange things back then.  The Tahiti I picked up a while back (for parts) has that realy long section of hull behind the motor, (I think whoever thought of that idea was an IDIOT !!!) and it was a PITA to get that pump out  :banghead:.  I was suprised no one had cut a hole in that hull to get access to the pump, battery, exhaust, etc
[attachthumb=1]
Title: Re: 16' Tahiti ?
Post by: wanabe on March 06, 2008, 07:12:15 AM
Although not that extreme, my Kona also has a section that covers the pump and it's a real pain to get into the hand hole; I have to use a mirror to look down in it.
Title: Re: 16' Tahiti ?
Post by: jet boat performance on March 06, 2008, 07:33:44 AM
Jeff my old Brown boat actually had a splash well are , my blue boat last nite has the same thing but has been cut out Tom
wannbe ,those "long' rear sections as you describe are a real pain when your doing pumps as well  Tom
Title: Re: 16' Tahiti ?
Post by: wanabe on March 06, 2008, 08:51:05 AM
It's waaayyy down on the list but I was thinking of cutting a hole directly above the hand hole for better access; problem is, I don't know what to rig there to cover the hole.
Title: Re: 16' Tahiti ?
Post by: Josh@JBP on March 06, 2008, 10:39:05 AM
It's waaayyy down on the list but I was thinking of cutting a hole directly above the hand hole for better access; problem is, I don't know what to rig there to cover the hole.

My Glastron has one of these above the inspection cover on the E-pump that actually goes into the hull/engine compartment :screwy:

(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fwww.discountmarinesupplies.com%2F77523109.jpg&hash=1d4d5e37232633ed0e3f99184252d71a5376cea6)
Title: Re: 16' Tahiti ?
Post by: wanabe on March 06, 2008, 10:51:31 AM
Again, it's waayy down the list, but that would work; how much are those?
Title: Re: 16' Tahiti ?
Post by: Josh@JBP on March 06, 2008, 11:16:09 AM
I think the inexpensive ones are $10 and the expensive ones are $20.....you'll spend more on a milwaukee sawzall blade than that ;D, plus the silicone for around the outside, and a case of beer to get up the nerve to cut a hole like that in the boat........ so net net under $50
Title: Re: 16' Tahiti ?
Post by: wanabe on March 06, 2008, 11:53:49 AM
... a case of beer to get up the nerve to cut a hole like that in the boat...

that right there is true; if you were closer I'd go 2 cases and have you make the cut  ;D
Title: Re: 16' Tahiti ?
Post by: Josh@JBP on March 06, 2008, 12:33:12 PM

that right there is true; if you were closer I'd go 2 cases and have you make the cut  ;D

With as much beer as I drink, you wouldn't want me cutting a hole after a Tall Boy :P
Title: Re: 16' Tahiti ?
Post by: Josh@JBP on March 06, 2008, 12:47:29 PM
ooops I think i done jacked my dads thread.........Back on track heres another pic of his 16'
(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi147.photobucket.com%2Falbums%2Fr319%2Fjetboatperformance%2Flittlejosh.jpg&hash=02fea486065d8ef5198b5cf8ab7dccf39929cb51)
SMFPacks CMS 1.0.3 © 2026