1975 DiMarco Circle Boat Project "SoCalJetBoats Exclusive"

« **Reply #25 on:** November 17, 2013, 11:17:56 PM »

More...

« **Reply #26 on:** November 17, 2013, 11:22:10 PM »

I also got a pan made for the scoop. its almost done, just need to make a way to mount it down and add some duze fasteners. Photos of the pan will be up tomorrow.
The seats Pictured will not be used, they were just for mock up.

« **Reply #27 on:** November 18, 2013, 06:48:03 AM »

Looks good!

Sent from my iPhone using SoCalJetBoats

« **Reply #28 on:** November 18, 2013, 07:28:54 PM »

Jake, you really need to rock those seat's. They scream McIntyre SNOB!

« **Reply #29 on:** November 25, 2013, 05:13:08 PM »

Haven't got too much done in the last few days. Got the scoop primered with some Prestec high build primer. Sprayed on about 4 coats. One light coat to start and then 3 good wet coats.

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #30 on:** November 25, 2013, 10:33:16 PM »

Nice work jake! Keep up the good work.

Sent from my iPhone using SoCalJetBoats

« **Reply #31 on:** November 28, 2013, 10:39:51 AM »

Looking Good! I like your pump brace

« **Reply #32 on:** December 02, 2013, 03:25:16 PM »

Quote from: GN107 on November 28, 2013, 10:39:51 AM

Looking Good! I like your pump brace

Thank you GN107

« **Reply #33 on:** December 02, 2013, 03:29:20 PM »

Got some color on the scoop today. Scuffed up the primer with 220 Then shot it with a half prestec snow white gel and half prestec super clear, thinned it down about 4% with acetone and sprayed it with a harbor freight gun. Its almost a walk away finish.

« **Reply #34 on:** December 02, 2013, 03:32:26 PM »

Looking good

SRC

« **Reply #35 on:** December 02, 2013, 04:25:17 PM »

Well it mite need some brown on it. What does every body else think???

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #36 on:** December 02, 2013, 04:58:03 PM »

Brown numbers

« **Reply #37 on:** December 02, 2013, 05:00:17 PM »

That look crazy just sitting on there

SRC

« **Reply #38 on:** December 02, 2013, 06:18:32 PM »

Yup needs some brown for sure!!!

« **Reply #39 on:** December 02, 2013, 07:48:16 PM »

Hand painted brown pinstripes for authenticity and brown numbers! Looks good!

RoB~SoCalJetBoats~

« **Reply #40 on:** December 02, 2013, 08:19:12 PM »

Paint the bottom flat part brown and about 4 inches out the mouth

Sent from my iPhone using SoCalJetBoats

« **Reply #41 on:** December 03, 2013, 08:39:25 AM »

You're getting good with that spray gun Jake! I agree it needs some accent colors, brown and maybe some Cal Trans orange???

That thing is coming out really nice. That's crazy doing all that milling work with a drill and a grinder.

It's coming out sweet Jake, keep going bro.

« **Reply #42 on:** December 03, 2013, 11:03:41 AM »

Jake you're slowly but surely turning into my hero!!!

Sent from my iPhone using SoCalJetBoats

« **Reply #43 on:** December 03, 2013, 01:09:52 PM »

I'm really enjoying this build! Great job 👍

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #44 on:** December 03, 2013, 09:05:08 PM »

You're kicking some serious ass there!

-beerjet-

« **Reply #45 on:** December 05, 2013, 05:52:37 PM »

Quote from: beerjet on December 03, 2013, 09:05:08 PM

You're kicking some serious ass there!

-beerjet-

Thank you beerjet!

« **Reply #46 on:** December 05, 2013, 06:01:21 PM »

damn what im doing wrong in life maybe i should have been a ceramics teacher so i can have a drag boat and cj boat j/k jake looking good bud

« **Reply #47 on:** December 05, 2013, 06:03:23 PM »

Alright, wire loom is done for now.
i used 12 gauge for the Hot and Grounds and 14 gauge for the senders and ect...

I like to braid all my wire. I braid 3 wires at a time. I put 3 wires in a vise and clamp them down.

Then stretch them out and put the other side in a drill

then i spin the wires till they are nice and wound. i did this to all 3 sets

Then i striped all the ends

then put the connectors on and heat shrinked them

Connected to two 4 pole boxes. one side for hot, ground, and ignition. the other side for senders and ect.

« **Reply #48 on:** December 05, 2013, 06:30:38 PM »

Quote from: Just Electric on December 05, 2013, 06:01:21 PM

damn what im doing wrong in life maybe i should have been a ceramics teacher so i can have a drag boat and cj boat j/k jake looking good bud

Haha thanks Just Electric, The drag boat took a long time to build. Almost 4 years. But we can say thanks to the asshole seadoo driver for killing my Sw18 and state farm for backing up the true value of it.

« **Reply #49 on:** December 05, 2013, 06:59:33 PM »

Looks bitchen Jake
Keep the post coming

SRC

jyeager

jyeager

sevans01

icecreaman

jyeager

BoatDocDANE

GN107

jyeager

jyeager

uncleBOBBY

jyeager

74hondo

uncleBOBBY

19ftCheyenne

HardLuck Baker

randog

icecreaman

Jet Boat Maloney

riptide84

beerjet

jyeager

Just Electric

jyeager

jyeager

uncleBOBBY