20' Rogers Project

« **Reply #25 on:** September 20, 2013, 11:34:12 AM »

I know bud if I do t go fiberglass I'm gonna make my own seat frames I've got the tools and a few templates I can copy. Was just teasing ya Ron

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #26 on:** November 13, 2014, 10:19:32 PM »

So I finally got it to the upholsterer today.
The fenders were really bent up, so I cut them off.
Had an extra set of chrome fenders laying around and bolted them on.
New tires yesterday.

« **Reply #27 on:** November 20, 2014, 04:36:53 PM »

One week later and it's all done.
Raul at A-1 Marine did a great job and I really didn't think it would be done in a week.

« **Reply #28 on:** November 20, 2014, 05:20:14 PM »

Quote from: 76 Bonneville on November 20, 2014, 04:36:53 PM

One week later and it's all done.
Raul at A-1 Marine did a great job and I really didn't think it would be done in a week.

Wow, that came out really nice! I dig this hill.

Sent from my iPhone using SoCalJetBoats mobile app

« **Reply #29 on:** November 20, 2014, 06:00:52 PM »

Thanks SJ.
I've always like the barrel sides on the Rogers and Sangers.
And to get that on a 20 Cruiser even better.

« **Reply #30 on:** November 20, 2014, 06:54:21 PM »

Looking good Ron!

Sent from my iPhone using SoCal Jet Boats

« **Reply #31 on:** November 20, 2014, 07:48:49 PM »

HOT DA-YUM!!

that looks super clean. has a crisp fun feel to it. great job boss!

« **Reply #32 on:** November 20, 2014, 08:11:00 PM »

Thanks, came out better than expected.
Sent pics to my daughter and son in law.
Their both excited. I hope to have it done for them soon.
Maybe make a showing at TPM.

« **Reply #33 on:** November 20, 2014, 09:40:26 PM »

Quote from: 76 Bonneville on November 20, 2014, 08:11:00 PM

Thanks, came out better than expected.
Sent pics to my daughter and son in law.
Their both excited. I hope to have it done for them soon.
Maybe make a showing at TPM.

Never under estimate yourself, that is where you will fall short.

Looks real good!

Sent from my iPhone using SoCalJetBoats

« **Reply #34 on:** November 07, 2015, 10:29:19 PM »

This should work well for the kids.
Bought this from Jeff (Jacks Eliminator) the other day.

« **Reply #35 on:** November 07, 2015, 11:13:11 PM »

Very nice! I'm excited to see how she runs. I still have some things to dial in on my Advantage. What are the plans for the pump?

« **Reply #36 on:** November 08, 2015, 08:24:33 AM »

Damn this thing is purty. Are you putting on an engine cover with it?

Sent from my iPhone using SoCal Jet Boats

« **Reply #37 on:** November 08, 2015, 08:41:36 AM »

Open motor for now and in my opinion that's the way it should stay. My son in law wanted an engine cover so the little ones don't get burned. I told him to give the open motor a shot, we can always enclose it later. Also much easier to access the back of the boat and retrieve ropes. This motor although pretty much stock, should be seen.

For now leaving the pump stock. Just putting this boat together for the kids.
It will be up to them to hop it up. Although it could be fun to put out Comp Jet motor and pump in it

« **Reply #38 on:** November 08, 2015, 08:50:10 AM »

man that interior came out awesome.

if you dont mind me asking... .whats it cost to do something like that?

also, the woodwork? i know you did it yourself, but if you were going to put a price on it....

« **Reply #39 on:** November 08, 2015, 09:27:26 AM »

Dead of winter price a year ago was $1500.00 for upholstery and $600.00 for bimini.
As far as doing the wood. I wouldn't know how to price it. The way I do it, it's too labor intensive.
Everything is glued, outside edges are routed, inside and outside corners are glassed. Barrel seats are fully glassed inside and out.
Raul says he has to turn up the air pressure to shot through the glass. But hopefully I'll never have to redo them.

« **Reply #40 on:** November 08, 2015, 09:32:37 AM »

Ok. I understand. I can do the fiberglass work, i just dont do wood. Haha. I guess i will need to learn and buy some tools. If it was steel i would be set haha.

Sent from my iPhone using SoCal Jet Boats

« **Reply #41 on:** November 08, 2015, 09:45:49 AM »

You looking to have some wood work done?
I can help with that...

« **Reply #42 on:** November 08, 2015, 10:42:50 AM »

Well, my boat is about ready to go. I fixed everything there was to fix, got it running, did the carpet, and am getting the seats done right now.

But it was a fun project, so im shopping for another boat to keep me busy through the winter, or maybe a chopper/bobber. (But thats for a different site)

There are tons for sale. Some are missing the entire interior. If its complete i can copy or repair. If its missing, im lost.

Sent from my iPhone using SoCal Jet Boats

« **Reply #43 on:** November 08, 2015, 10:44:02 AM »

Also, im done hijacking this thread. I just really liked the interior layout. And would like to copy it on my next project.

Sent from my iPhone using SoCal Jet Boats

« **Reply #44 on:** November 08, 2015, 10:51:43 AM »

When you get ready to do an interior, post it up and you'll get plenty of advice. Some of it good.

« **Reply #45 on:** November 08, 2015, 12:57:45 PM »

This boat is awesome!!

Just Electric

76 Bonneville

76 Bonneville

SuperJet

76 Bonneville

East County Kona

JARVIS

76 Bonneville

More2LifeThanMPG

76 Bonneville

JordanDangerfield

76Rogers

76 Bonneville

badlx

76 Bonneville

badlx

JARVIS

badlx

badlx

76 Bonneville

el mojado