Just ordered a gallon of this.

best investment for your interior. I have tried lots of stuff this stuff is amazing.


SRC

Sent from my iPhone 5 using SoCalJetBoats mobile app

I was turned on to Malco leather and plastic cleaner by a friend who owns a upholstery shop, i was amazed how good this sheit works.
Spray it on and you can see the dirt and stuff start running off. I would stay away from anything to harsh and not meant for vinyl. I had a issue where i used a generic cleaner and had to replace some pieces in my boat
Spend a couple bucks and get the right shit.


SRC 🚤💨

just be careful with the magic erasers.  they ARE abrasive and once you burn thru that vinyl layer you'll have a nice bald spot on your interior.  my interior guy told me just to use some dawn soap and water... anything stubborn gets the plastic bristle brush.  doing all white interior will be tough this season to keep clean im sure.  just sitting in the garage i constantly get spots where i put my hand, etc.

well, for the purpose of this project, magic erasers are serving their purpose.....to deep clean the vinyl thats been sitting untouched and uncovered for 4+ years.

I can imagine if you used magic erasers after every weekend you took your boat out it would damage it, but for this deep cleaning or even touching up spots that are stained, it will work fine.

Like anything in life, moderation is key.

hey... less typing.  more scrubbing.  you have work to do. 

i wish i was at home working on it....stuck at work watching the time pass by.

best investment for your interior. I have tried lots of stuff this stuff is amazing.


SRC

Sent from my iPhone 5 using SoCalJetBoats mobile app

I'm gonna have to get some of that stuff!!


Sent from my iPhone using SoCal Jet Boats

Wow!! 👏👏👏👏👏👏good job!! U the man!!😎


Sent from my iPhone using SoCalJetBoats mobile app

That's how it's done. Mine took the better part of a year and almost 9k.

Tits.

-beerjet-

You need to ditch the bow seats completely and throw in a stripper pole👍


Sent from my iPhone using SoCalJetBoats

Looks like Brad is bringing the transport barge.  I'm seeing chairs, ez ups, fuel jugs, ice chests all occupying that front area.   

So....it wasnt a good weekend overall for the boat.

not more than 3 minutes on the road, the engine hatch popped up, flipped over. It knocked off one of the swim steps then ripped the hatch hinges right out........followed by an 18 wheeler running it over.

The hatch is destroyed. The swim step is banged up but usable.

Friday evening I cruised it up river for about 10 minutes and it stalled...it would start and run for about 5 seconds then stall again. I ended up getting towed in by Wes (thanks bud)

Saturday Art picked up some new fuel filters and I swapped them out...fired it up on the trailer and ran great.....put it in the water and I wouldnt even idle out of the marina. I put it on the trailer and just tried to forget about it and enjoy the rest of the weekend.

Sunday morning I was going through it all in my head trying to figure out what was going on....finally remembered I have a inline aluminum filter between the mechanical pump and the carb.....it came off the race boat and I cant remember the last time I cleaned it out....well, it was clogged all up. I removed it and it ran much better.

I cruised it up to the dam and back...Even towed Art from the Roadrunner back to the bluewater because he ran out of gas...and of course the gas pump at riverland was out of order.

Motor is strong, carb needs some adjustment....and I need some more up angle in the nozzle as its running a bit wet with just 4 degrees of wedge in it.

Also, I need to rebuild the seat bases. I tried to shortcut by using the ones I had, but reinforced them, but they didnt hold up after I hit the first wake causing me to have an instant recliner in the boat lol.

Also, I need to rebuild the seat bases. I tried to shortcut by using the ones I had, but reinforced them, but they didnt hold up after I hit the first wake causing me to have an instant recliner in the boat lol.

OMG! I'm sorry Brad but I can picture you and I can't help laughing my ass off!!


Sent from my iPhone using SoCalJetBoats mobile app

Also, I need to rebuild the seat bases. I tried to shortcut by using the ones I had, but reinforced them, but they didnt hold up after I hit the first wake causing me to have an instant recliner in the boat lol.

You should paint "Lay-Z-Boy" on the transom.

At least it floats and you finally got it running.