SoCal Jet Boats

Tech Talk => Projects => Topic started by: Wayne Zighter on June 06, 2011, 10:54:08 PM

Title: 72 Fresno Flatty
Post by: Wayne Zighter on June 06, 2011, 10:54:08 PM

now that I finaly got the Hallett done I decided to get busy on the fresno hull I picked up last year, here's the first set of pics

Title: Re: 72 Fresno Flatty
Post by: ka0tyk on June 06, 2011, 11:13:54 PM

is it just the pix or is that hull really wide?  it looks like theres room for 2 wide seats in it. 

Title: Re: 72 Fresno Flatty
Post by: Wayne Zighter on June 06, 2011, 11:27:02 PM

it's really that wide, 10" wider then my stevens

Title: Re: 72 Fresno Flatty
Post by: HaulsBalls on June 07, 2011, 08:31:22 AM

Great looking hull, other than the bulkhead and the dash cutout it looks pretty clean.  Whats the plan for power?

Title: Re: 72 Fresno Flatty
Post by: Wayne Zighter on June 07, 2011, 12:42:01 PM

Quote from: HaulsBalls on June 07, 2011, 08:31:22 AM

Great looking hull, other than the bulkhead and the dash cutout it looks pretty clean.  Whats the plan for power?

the bulkhead should'nt be too much of a problem, but the hole in the dash really bums me.
I had an early 460 put together for it, But unfortunatly I had to sell it to pay some bills, so I really don't know yet.  anything but an olds

Title: Re: 72 Fresno Flatty
Post by: ka0tyk on June 07, 2011, 01:00:14 PM

Quote from: Wayne Zighter on June 07, 2011, 12:42:01 PM

the bulkhead should'nt be too much of a problem, but the hole in the dash really bums me.
I had an early 460 put together for it, But unfortunatly I had to sell it to pay some bills, so I really don't know yet.  anything but an olds

i got a stainless plate and covered a crack in my dash rather than dealing with the glass work and messing up the gel in my dash area.

http://www.brainbox.us/misc/IMG_20110517_234825.jpg (http://www.brainbox.us/misc/IMG_20110517_234825.jpg)