SoCal Jet Boats
Tech Talk => Projects => Topic started by: Ty64 on May 21, 2017, 01:52:10 PM
-
New to the forum and thought I would post up my project. First off I had a crack on the bottom we flipped it over and ground out the affected area and repaired and new gel coat. Then put it right side up and found soft spot on floor and torn into them and found the main stringers were good but small sub stringer were rotten.
-
New sub stringer are in and glassed. pulled the Olds 455 out and built 468 Chevy, Comp cam CL11-240-4,Edelbrook air gap intake, HVH 1" spacer, COMP Cams Ultra Pro Magnum roller Rocker Arms, Holley marine 850.
-
Nice. Boat
I dig the yellow and yellow block
Sent from my iPhone using SoCal Jet Boats
-
Interior wood and hatch are done and off to Martinez for upholstery. this week new floors and new Imco gas tanks will be installed.
-
Thanks Acemat21 it's been a lot of work and still a ways to go. :banghead:
-
Awesome boat! Keep up the build thread, so informative!
Sent from my iPhone using SoCal Jet Boats
-
Awesome boat! Keep up the build thread, so informative!
Sent from my iPhone using SoCal Jet Boats
Thanks this is the second time going though this boat 1st time was 24yr ago. can't wait to get it on the water again.
-
Awesome! Did you make the seats yourself??
Sent from my iPhone using SoCal Jet Boats
-
Awesome! Did you make the seats yourself??
Sent from my iPhone using SoCal Jet Boats
Yes sir
-
Sweeeeeet.
Sent from my iPhone using SoCal Jet Boats
-
Nice
Sent from my SM-G930P using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Floors are all in and glassed and spent 2 days color sanding and buffing. I don't know why it keeps rotating the photos :banghead:
-
The job you have done is very impressive. Keep the pics coming

Sent from my iPhone using SoCal Jet Boats
-
Good work man
-
The job you have done is very impressive. Keep the pics coming 
Sent from my iPhone using SoCal Jet Boats
Thanks its a labor of love.
-
Good work man
Thank you sir. Hallett for life :thumbup:
-
My wife found an old school soft foam steering wheel at Goodguys car show this weekend in perfect shape. Made my day I had been looking for one for 2 months hard to come by with the soft foam.
-
Nice work.
Sent from my SM-G930P using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
final coat of resin on floors Imco gas tanks are back with filler necks welded. Time for final assembly.
-
Productive weekend gas tanks, Battery boxes and place diverter all mounted. Wiring completed. Fired up engine and broke in the cam all went smooth. Finished buffing and waxed. Had a problem with the diverter not wanting to prime it might be a bad pump will look in to it this week. now just waiting on upholstery and carpet. should be on the water July 1st
-
Its done and at Havasu