SoCal Jet Boats

Tech Talk => Projects => Topic started by: Deadend on July 24, 2012, 02:22:48 PM

Title: 79 Anthony
Post by: Deadend on July 24, 2012, 02:22:48 PM

Got my seats done on my Anthony today.. The 402 is still at the machine shop. Just dropped the trailer off at my mechanic to do the bearings.. I'm thinking the seats are to plain but maybe they will grow on me. Before pic and after.

Title: Re: 79 Anthony
Post by: AQUAHOLIC on July 24, 2012, 02:49:11 PM

interior looks great. who did you have do them

Title: 79 Anthony
Post by: Deadend on July 24, 2012, 06:25:57 PM

Jacob Kaysen in cashmere Washington. He built them from scratch (new wood foam) for $2000 there French seam gray stitch, welt only on the sides where it meets the boat.  I think he did to good of a job!! Makes the rest of the boat look like crap!! Lol
And thank you..

Title: Re: 79 Anthony
Post by: ka0tyk on July 24, 2012, 06:51:25 PM

great lookin interior.  man it is WHITE! 

Title: Re: 79 Anthony
Post by: USCvictory on July 24, 2012, 07:16:48 PM

That looks super clean.

Title: 79 Anthony
Post by: Deadend on July 24, 2012, 08:55:01 PM

Thanks guys...
My interior guy is calling it Miami fukin vise! Lol And a friend of mine thinks I should name the boat hazardous material. Wait tell you guys see what I'm doing to the bottom of this thang! Lol

Title: 79 Anthony
Post by: Deadend on July 25, 2012, 11:06:35 PM

New pics.

Title: 79 Anthony
Post by: Deadend on July 25, 2012, 11:08:13 PM

Haven't even seen it in person yet.. Pick it up tomorrow.

Title: Re: 79 Anthony
Post by: ka0tyk on July 25, 2012, 11:41:06 PM

looks great and lots of space.


tuck that throttle cable under the floor while its all out.   8)

Title: 79 Anthony
Post by: Deadend on July 26, 2012, 09:09:49 AM

I was wondering about that. Just drill a hole and feed it threw? Then seal up the holes? I already drilled a hole in the back when I got the boat to get all the water out!!

Title: Re: 79 Anthony
Post by: Squirrel Master on July 26, 2012, 11:14:46 AM

i think inteior looks mighty fine. they did a good job on cut and seams it looks like. what r u doin to the bottom?

Title: 79 Anthony
Post by: Deadend on July 26, 2012, 08:11:44 PM

When I flip it I'm airbrushing a beach seen with a stripper poll and a fine ass lady doing her thing.. On the top side not to sure yet? But I'm going all out.. This is my personal boat so I can have some fun with her!!!