SoCal Jet Boats

Tech Talk => Projects => Topic started by: Cralston 72 hondo on May 31, 2019, 04:28:09 PM

Title: Bbf motor plates
Post by: Cralston 72 hondo on May 31, 2019, 04:28:09 PM

Looking for bbf 460 70-80 motor plates and bell housing thank you


Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)

Title: Re: Bbf motor plates
Post by: Cralston 72 hondo on May 31, 2019, 04:29:49 PM

For this motor


Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)

Title: Re: Bbf motor plates
Post by: mash on it on June 09, 2019, 10:01:30 AM

I have a 3 point mount, uses truck motor mounts, and bellhousing to pump mount.

For a rail 4 point set-up, Tom at Jet Boat Performance would likely have it in stock.

CP Performance might carry what you are looking for also.

Dan'l

Title: Re: Bbf motor plates
Post by: Rogers57x on January 06, 2020, 02:31:11 PM

Have a Ford set up for you motor plates and bellhousing 😎

Title: Re: Bbf motor plates
Post by: jim brock on January 07, 2020, 01:54:50 PM

I have a Harman marine set up, water pump cover,
,
 front mount, rear bellhousing with either top mount starter or stock location and all the mounting feet, nice cond. polished, this is the one you don't have to pull the dampener off to take off the front mount. 4300.00  jIM   LAND LINE NO TEXT. 1818-890-18678

Title: Re: Bbf motor plates
Post by: The_Dean_85 on January 08, 2020, 08:18:40 AM

I have this from my 460 send me a message if you are still in need


Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)