SoCal Jet Boats

Tech Talk => Projects => Topic started by: Willow Wog on June 30, 2019, 09:50:33 AM

Title: Eliminator sport cruiser project
Post by: Willow Wog on June 30, 2019, 09:50:33 AM

I picked this thing up awhile ago and finally found some time to get her running and back on the water. She hadn’t been on the water since 05’ and of coarse had full fuel tanks when I got it. So first I “disposed” of all the old fuel. Then pulled all the plugs and made sure she rolled over clean. Then checked for spark and the old Mallory dual point had shit the bed so eBay hei and new plug wires replaced that. The carb was an old Holley vacuum secondary and I had a brand new demon on the shelf. Fresh fuel, new carb and dizzy and she fired off first hit of the key.


Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)

Title: Re: Eliminator sport cruiser project
Post by: Willow Wog on June 30, 2019, 09:53:40 AM

So the plan was to get her running and just run her for the summer but the windshield and bow rail were driving me crazy so I started the process of removing them. I think it looks waaay better. Knocked the “old man boat” off of it


Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)

Title: Re: Eliminator sport cruiser project
Post by: Willow Wog on June 30, 2019, 09:59:47 AM

We’ve had it out a lot lately and having a blast with it. Plans are just continue to re rig and new interior as well as a trailer refresh so I’ll continue this post as progress continues


Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)

Title: Re: Eliminator sport cruiser project
Post by: mash on it on June 30, 2019, 12:23:47 PM

Very cool boat.

Mine still has the bow rail and windshield, has the 'old man look', but I'm getting old anyways.

Looks great

Dan'l