Eliminator Sprint

« **Reply #50 on:** June 01, 2008, 10:23:52 PM »

Thanks to Billy / ironman I got some work done today, he came over and made me get off the couch $:-\$ .

The dash needed some help !! It was set up for center steering, and when I removed the alum pannel I could tell it would never be strong enough to survive. With the original holes and the last set of holes the dash looked like swiss cheese

. So out came the power tools

. I cut the glass from the back, and removed the old wood (not fun) while Billy and Mark / Sanger Pete supervised. After a few hours of cutting and hammering and sanding the dash wood was gone and it was ready for the new wood. I cut and trimmed a piece of scrap wood I got from my neighbor (the wood worker) . Than I went to get the glass matt and resin and remembered I used all the matt on the bulkhead

. Oh well, done for the day, but ready for the next day

.

The swiss cheese dash, and the new wood

The old stuff

« **Reply #51 on:** June 03, 2008, 06:06:51 PM »

I realy dont want to have to tow your ass around just so you can get your ride on the water

so get off the computer and get your friggin boat done already.

« **Reply #52 on:** June 03, 2008, 07:19:41 PM »

Quote from: ironman on June 03, 2008, 06:06:51 PM

I realy dont want to have to tow your ass around just so you can get your ride on the water so get off the computer and get your friggin boat done already.

x2

« **Reply #53 on:** June 03, 2008, 07:37:10 PM »

Quote from: ironman on June 03, 2008, 06:06:51 PM

I realy dont want to have to tow your ass around just so you can get your ride on the water so get off the computer and get your friggin boat done already.

Cant finish it, dont have any motor plates

. Get off the computer and go cut my plates

Quote from: Ralph Brunt on June 03, 2008, 07:19:41 PM

x2

Ok, I'll go work on the dash

« **Reply #54 on:** June 03, 2008, 07:38:43 PM »

Quote from: propless on June 03, 2008, 07:37:10 PM

Cant finish it, dont have any motor plates . Get off the computer and go cut my plates
Ok, I'll go work on the dash

you see, thats what we are talking about, GET OFF THE COMPUTER AND GO WORK ON THE BOAT

« **Reply #55 on:** June 03, 2008, 07:42:00 PM »

Quote from: Ralph Brunt on June 03, 2008, 07:38:43 PM

GET OFF THE COMPUTER AND GO WORK ON THE BOAT

Yeah, what he said........................

2sav

« **Reply #56 on:** June 03, 2008, 09:34:30 PM »

Quote from: 2savage4you on June 03, 2008, 07:42:00 PM

Yeah, what he said........................

2sav

Look whos talking !! If you spent half as much time on your boat as you do on here you would have had a finished boat 3 projects ago.

Quote from: Ralph Brunt on June 03, 2008, 07:38:43 PM

you see, thats what we are talking about, GET OFF THE COMPUTER AND GO WORK ON THE BOAT

Dash wood glassed in, and one layer of glass on the back

. And just for you Ralph I'm going to go back out and put another layer on it so its done tonight

.

« **Reply #57 on:** June 03, 2008, 09:38:29 PM »

Quote from: propless on June 03, 2008, 09:34:30 PM

Dash wood glassed in, and one layer of glass on the back . And just for you Ralph I'm going to go back out and put another layer on it so its done tonight .

thats what im talkin about! now come do my dash too!

« **Reply #58 on:** June 03, 2008, 11:00:42 PM »

Quote from: Brad @ SoCalJetBoats.com on June 03, 2008, 09:38:29 PM

thats what im talkin about! now come do my dash too!

Your is already done, I saw the pictures.

The back side is all glassed in, just some trimming left to do. It cost me one t shirt and some hair (fu##### resin) but its done. now I just need to do some filling and smoothing on the front.

Just so you all know, this is the worst job I have ever done !! I had resin running down my arms and all over everything , What a mess !! Next time I'll flip the boat to do a dash !!

No, on second thought, I will never do this again !!!!

« **Reply #59 on:** June 04, 2008, 12:13:48 AM »

I've got the motor plates scheduled to go on the waterjet friday, so if all goes well should have them by this weekend

« **Reply #60 on:** June 04, 2008, 01:03:34 AM »

Parts parts I love parts

, Thanks Billy. I should be able to make some more progress by then

« **Reply #61 on:** June 04, 2008, 06:02:47 AM »

Quote from: propless on June 03, 2008, 09:34:30 PM

Look whos talking !! If you spent half as much time on your boat as you do on here you would have had a finished boat 3 projects ago.

I call it steppin stone's my brother

Quote from: propless on June 03, 2008, 11:00:42 PM

Your is already done, I saw the pictures.

The back side is all glassed in, just some trimming left to do. It cost me one t shirt and some hair (fu##### resin) but its done. now I just need to do some filling and smoothing on the front.

Just so you all know, this is the worst job I have ever done !! I had resin running down my arms and all over everything , What a mess !! Next time I'll flip the boat to do a dash !! No, on second thought, I will never do this again !!!!

I call B.S. Your addicted and you need B.A. Never do it again....I said that 4 boats ago

2sav

« **Reply #62 on:** June 04, 2008, 07:54:59 PM »

Quote from: 2savage4you on June 04, 2008, 06:02:47 AM

Never do it again....I said that 4 boats ago

2sav

Yea, and you still havnt finished one

. Back to the craigslist thread with you Sanford jr !!

« **Reply #63 on:** June 04, 2008, 07:59:38 PM »

Quote from: propless on June 04, 2008, 07:54:59 PM

Yea, and you still havnt finished one . Back to the craigslist thread with you Sanford jr !!

Hell, i may be on #5 here shortly, im probably gonna sell the Bahner and start all over again

2sav's not

« **Reply #64 on:** June 04, 2008, 08:22:32 PM »

Quote from: 2savage4you on June 04, 2008, 07:59:38 PM

Hell, i may be on #5 here shortly, im probably gonna sell the Bahner and start all over again

2sav's not

Yes you are

!! And I already saw the spy photos of your next project (#5). http://www.socaljetboats.com/index.php?topic=2841.msg40581#msg40581

« **Reply #65 on:** June 04, 2008, 08:38:18 PM »

Quote from: 2savage4you on June 04, 2008, 07:59:38 PM

Hell, i may be on #5 here shortly, im probably gonna sell the Bahner and start all over again

2sav's not

2 sav=SANFORD

« **Reply #66 on:** June 04, 2008, 08:53:02 PM »

looking good Jeff!

« **Reply #67 on:** June 06, 2008, 08:40:42 PM »

Sorry to hear about the pup Bro got one (14.5) thats in similar shape

Check you PMs

« **Reply #68 on:** June 12, 2008, 08:41:22 PM »

Just so you guys dont think I've been slacking off , Here are some pics from tonight. Its comeing out ok and should be ready for assembly soon

.

And NO I'm NOT putting carpet in my boat !!!

« **Reply #69 on:** June 12, 2008, 08:51:31 PM »

Hey lookin real good Prop

Mark

« **Reply #70 on:** June 12, 2008, 09:22:09 PM »

Very Nice work Jeff !

« **Reply #71 on:** June 12, 2008, 09:32:20 PM »

Thanks guys , its been a bitch, but I realy like this old hull (its sooo sexy) !!

btw, Tom I almost have my parts order ready.

« **Reply #72 on:** June 12, 2008, 10:03:55 PM »

Quote from: propless on June 12, 2008, 09:32:20 PM

Thanks guys , its been a bitch, but I realy like this old hull (its sooo sexy) !!

btw, Tom I almost have my parts order ready.

Hey............Where's the carpet

2sav

« **Reply #73 on:** June 12, 2008, 10:26:40 PM »

hey 2Sav arent ya supposed to be workin on your boat not here

« **Reply #74 on:** June 12, 2008, 10:29:11 PM »

Quote from: 2savage4you on June 12, 2008, 10:03:55 PM

Hey............Where's the carpet

2sav

Race boats dont need carpet !!! OOPS, did I say that ? ummm, I ment I dont like carpet because it gets dirty. Yea thats it, no future race boats here, just another old lake boat.

propless

ironman

Ralph Brunt

propless

Ralph Brunt

2savage4you

propless

Brad @ SCJB

propless

ironman

propless

2savage4you

propless

2savage4you

propless

bkplesh

BUSBY

jet boat performance

propless

76NORDIC

jet boat performance

propless

2savage4you

76NORDIC

propless