SoCal Jet Boats

Tech Talk => Projects => Topic started by: lifted250 on December 18, 2014, 07:36:17 PM

Title: Help plz in take
Post by: lifted250 on December 18, 2014, 07:36:17 PM

Just bought this boat It looks like a set back intake were can I get a transom cove  or what do I do to make it work


Sent from my iPhone using SoCal Jet Boats

Title: Re: Help plz in take
Post by: bmcgee463 on December 18, 2014, 07:46:07 PM

Is that the transom?

Title: Re: Help plz in take
Post by: lifted250 on December 18, 2014, 07:54:18 PM

Yes


Sent from my iPhone using SoCal Jet Boats

Title: Re: Help plz in take
Post by: jyeager on December 18, 2014, 07:54:38 PM

If it is set back, you'll have to make a set. Jig saw and a drill is about all you'll need. Maybe 1/8th to 1/4 aluminum. Rough out a shape make it fit then dill some holes. Make it work 👍👍👍👍


Sent from my iPhone using SoCalJetBoats mobile app

Title: Re: Help plz in take
Post by: lifted250 on December 18, 2014, 07:54:38 PM

That out back


Sent from my iPhone using SoCal Jet Boats

Title: Re: Help plz in take
Post by: lifted250 on December 21, 2014, 12:49:35 PM

Any 1 have something I can  use


Sent from my iPhone using SoCal Jet Boats

Title: Re: Help plz in take
Post by: GT Jets on December 21, 2014, 12:57:47 PM

Quote from: lifted250 on December 21, 2014, 12:49:35 PM

Any 1 have something I can  use


Sent from my iPhone using SoCal Jet Boats

Do you have an angle finder?

If not you can download a clinometer for your smart phone.

I may have a fiberglass t/a that will work for you.

Get the angle difference from the pump to the transom.

GT

Sent from my SM-G900V using SoCal Jet Boats mobile app

Title: Re: Help plz in take
Post by: lifted250 on December 21, 2014, 01:45:19 PM

Top mes
Bottom mes


Sent from my iPhone using SoCal Jet Boats

Title: Re: Help plz in take
Post by: vedo71 on December 21, 2014, 04:33:55 PM

I actually happen to have my transom plate off my boat right now and it's a 1 piece aluminum unit I can make a paper template and mail it to u if u need


Sent from my iPhone using SoCal Jet Boats

Title: Re: Help plz in take
Post by: vedo71 on December 21, 2014, 04:38:06 PM

Honestly it doesn't look like it was set back enough because of ur clean out location u may have to put ur transom plate on the inside


Sent from my iPhone using SoCal Jet Boats

Title: Re: Help plz in take
Post by: Flusher on December 21, 2014, 05:00:37 PM

Is there still any of the transom left behind the intake, just behind the shoe? I like about 3/4" of glass remaining at the keel and the rear flange trimmed half way through the last two holes.  Looks like a good solid setback for rough water.  I bet the TA will still register and seal on the suction flange.  I really like that setback because you can still remove the bowl without pulling the TA.

Title: Re: Help plz in take
Post by: GT Jets on December 21, 2014, 05:11:19 PM

Quote from: lifted250 on December 21, 2014, 01:45:19 PM

Top mes
Bottom mes


Sent from my iPhone using SoCal Jet Boats

Not sure if this will fly or not.

Let me know.

Sent from my SM-G900V using SoCal Jet Boats mobile app

Title: Re: Help plz in take
Post by: vedo71 on December 21, 2014, 05:32:48 PM

Shitty pic


Sent from my iPhone using SoCal Jet Boats